Geez I didn't know they made a kit. I did all this on my own about 5 years ago. Ended up with a lot the same. Made my own engine mounts, cross member, flex plate cover, altered front sump oil pan, tranny tunnel room I figured all that out. One thing is I used the passenger header on the driver side it clears perfect. Kills me seeing there was a kit
@The-GreenHornet11 күн бұрын
The air bags make it bounce around while going down the road.??
@DeviousCustoms11 күн бұрын
No it does not. Our cars all have shocks.
@yeromafedorchuk922811 күн бұрын
Do you have a kit for a 61 caddy fleetwood?
@DeviousCustoms11 күн бұрын
Yes sir. Www.Deviouscustoms.Com
@festersgarage492424 күн бұрын
Woohoo awesome
@RadBMXBuilds25 күн бұрын
Hi Jeff
@DeviousCustoms25 күн бұрын
Hello
@twizted1toyz25 күн бұрын
🎉
@fixinstuff966226 күн бұрын
🙂
@DeviousCustoms28 күн бұрын
Yes sir we make them.
@olschoolgamer128 күн бұрын
What size rims are those?
@DeviousCustoms28 күн бұрын
20”
@olschoolgamer128 күн бұрын
I have a 1962 Lincon I did not know they made custom door panels like those. Where did you get them? Did they come from devious customs?
@desmondgriffin39242 ай бұрын
Would this work on a 69 deville
@DeviousCustoms2 ай бұрын
Yes we have a kit for that ❤
@TheCookw062 ай бұрын
Can’t wait to see it finished
@ravenjustice58902 ай бұрын
Trying to use this kit with a 6.0 and 4l80 in a 63 and nothing it even close to fitting. Is there specific parts for this combo that are different
@DeviousCustoms2 ай бұрын
Kit is designed for a 4l60.
@freebehindbars86543 ай бұрын
That’s clean af!
@BillyLewis3923 ай бұрын
Getting pretty close on the swap. Are you guys using some type of adapter or replacement gear to run the stock speedo on the GM trans?
@DeviousCustoms3 ай бұрын
What trans are you running? We use 4l60 and 4l80. Which are electrical controlled so it’s plug and play. If you’re running a non electric trans you will need an electrical converter box for Speedo cable to go into and work.
@BillyLewis3923 ай бұрын
running a 4l65. Using the fitech ultimate setup so it’s got the big plug that goes in above the trans pan and then a small vehicle speed sensor plug but I currently have nothing to plug it to. The trans i bought didn’t come with anything at the speedo hole. I assume I just need to abandon the original cable/gear and buy an electronic sensor to put on the tail of the gm trans and run it through the fitech.
@BillyLewis3923 ай бұрын
What starters are you guys running with your ls swaps? Trying a power master but I’m hitting crank sensor on one side and manifold flange on the other.
@DeviousCustoms3 ай бұрын
We use gm starter. ❤
@BillyLewis3923 ай бұрын
@@DeviousCustoms thanks for the quick response. I should have tried that first instead of thinking I needed something I could adjust the clock on.
@ronalddiggins90963 ай бұрын
I have a 62 buick lesabre, is there a kit like this for an LS swap
@louiszeigler68694 ай бұрын
How much are your frames and motor mounts?
@josemartinez-m9f4 ай бұрын
hello . i have 1958 metro van need the front letters and front emblem do yuo know where i can found it ? please let me know if you something
@joecastillo66544 ай бұрын
What about 1962
@PaulettePerrault5 ай бұрын
ya know a stroked 460 with sr71 heads bolts in and can easily make 8-900 horsies
@joevecchio46876 ай бұрын
Because of you motoheads my son wants to do this on his 69 coupe deVille I spent my entire life trying to raise an upstanding member of society But now he’s turning into a degenerate grease monkey AND he’ll be broke 😫😩😤😠🤬
@NickDickerson-x1o6 ай бұрын
Cool edit ✍️
@tomcollins29326 ай бұрын
🤘🤘🤘🤘🤘🤘🤘
@NickDickerson-x1o6 ай бұрын
My dad was cool dude
@Ghostface-l9u6 ай бұрын
Cool
@Ghostface-l9u6 ай бұрын
That grandpa
@Ghostface-l9u6 ай бұрын
Like it dad
@Ghostface-l9u6 ай бұрын
Thank you
@gbfaster016 ай бұрын
I can t wait to see my LC running
@AFKustoms7 ай бұрын
Sanitary AF
@jokerinside9997 ай бұрын
How much this car?
@DeviousCustoms7 ай бұрын
Not for sale.
@BillyLewis3927 ай бұрын
I just bought this kit from you guys and have a LS3 being built for my 67. Was planning to go 4L65E. Is that possible with this kit or should I change my plans to a 4L60E?
@DeviousCustoms7 ай бұрын
Yes will work with 4l65
@BillyLewis3927 ай бұрын
Thanks. Do you guys offer any ready to go driveshafts?
@quagmiredavis41179 ай бұрын
Another fucked up classic must be some inbreeding in that family
@RadBMXBuilds9 ай бұрын
Beautiful
@DeviousCustoms9 ай бұрын
Thanks ❤
@johnbehneman15469 ай бұрын
SUGGESTION: STREET TRUCKS MAGAZINE!!!
@zuckyx5x9 ай бұрын
Congratulations!
@michaelbenardo569510 ай бұрын
Scandalous.
@NakedDave10010 ай бұрын
Don't cheapin the project up with some bullshit LS engine, use a Jon Kassee 632 Ford powerplant!!!!!!!!!!
@madness_56210 ай бұрын
Would the kit work for any LS motor?
@DeviousCustoms10 ай бұрын
Yes
@NakedDave10010 ай бұрын
Devious is an idiot, putting a cheapskate junk engine in a sweet car, what a dumbass!!!!
@robertsoliz181210 ай бұрын
I'm down
@dafuqwrongwitu10 ай бұрын
Song👎🏽 car👍🏽❤️
@robertsoliz181210 ай бұрын
Love seeing you guys work your magic on these old Lincolns
@DeviousCustoms10 ай бұрын
Thank you.
@robertsoliz181210 ай бұрын
Hey brother Congrats 24 years. Very happy for you, you guys deserve it. Consistent bad ass rides coming out of that shop
@DeviousCustoms10 ай бұрын
Thank you very much.
@JesseChapmanSr10 ай бұрын
Is that a 60 or a 61, looks bluetiful bro
@DeviousCustoms10 ай бұрын
Neither it’s a 65. ❤
@JesseChapmanSr10 ай бұрын
@@DeviousCustoms thank you for some reason I thought 61 cause of the suicide doors thought they only did that for those years plus I was guessing lol thanks bro sweet ride