You needed to show what it looks like after you take the tape off.

I’m confused…. Let’s say this test sample is 4” dia which is 12.56 sq.in. in cross section area. So if the sample is assumed to be at 2,000 psi state, shouldn’t the sample support 25,000 lbs?

Camera moved too quickly to see what he made. Move slower.

You’re a legend. I’m sure there are a million other types of bricks beyond just these, too. But it is a great start. I learned several things. Thank you!

Wtf a ruff in. Lololol

Great video and great information

nice work

What did you like the bottom of the fire pit with?

anyone who lays out there coil stock in the dirt dont even try to show me what you can do

Can you use a face brick on a paver application for a patio?

Active brickyard folks, everyone and everything here is bricked up

Great video, I understood everything you said.

Ever heard of a stand?

Hello I’m 22 starting egress w an d service, this is kinda a grey area for me what would you call your service mind I’m located in Barrie Ontario

When your power goes out during a major storm event your basement is destroyed. I am trying to figure out how to fix this problem without relying on power. Gravity only.

I had in mind to get a water pump to stop the water coming into my basement. I googled to see if anyone had done before to give me ideas and your video popped up. Someone who knows construction and also think too. 👍🏻 It’s amazed me how many construction guys come to my place and are clueless. They cannot follow my ideas, and I am not even in the construction field. 🧐

That’s eventually going to fill up with leaves around here.

Where can I get that apoxy gun and the apoxy? I live in between buffalo and Rochester ny

thanks, is solid brick or cored brick best to use for chimney rebuilds?

Hi I"m Tony from Windsor, Ontario Canada. Does your company still produce the thinner "pinehall"? brick you described in the video in a dark burgundy/brown colour? I need about 60-70 of them. The dimensions would be 1 1/2" X 4" X 8". They just do not make them in Canada anymore.

Wasted my time

Great video. I will say this: the terminology used in gravel and earth materials in general can be utterly confusing...even to a professional. “DOT-this” versus “ASTM-that”, “river run”, “crusher run”, “sharp”, “clean”, “processed”, “well graded”, “fine graded”, and on and on. Then try having a conversation with a hardscape mason who prefers one set of terms and reconciling this with what your civil engineer brother-in-law is trying to explain to you and your head will be spinning in no-time. Spot-on about stone dust...something I still see on some landscape architect drawings instead of concrete sand. Worth mentioning the key issues for most selections. Stability, erosion resistance and drainage.

Fix ur flipping audio daaamn

I hear the audio hum. Don't try this at home unless you want to be bored.

What type of gravel would you put on a leaking levee for small lake? Thanks

Fancy names

GFI should have been inside, not in the stairwell

Giving me a headache.

As a plumber, this was hard to watch. This guy doesn’t understand the shower system. Taking 3/4 to the shower is good, but the benefits end there with the amount of fixtures you have in this shower system. The only way you’ll get decent pressure to those body sprays is if you is 3/4 volume diverted and feed the 3/4 to the first tee in the loop. Without that feature, you might as well not put any of this shower together. Not good man... also is this Shaw’s shower? Cuz the body sprays aren’t roughed at proper heights.

These are NOT concrete "core" samples, they are concrete test specimens. Cast on-site by a field tech. No coring was done. Along with everything else mentioned in the comments.

The top jets will be great for 7'6' basketball players but I really hope this is your own house and not some poor unsuspecting paying customer. '

Great video! You should check out some of our brake accessories! It would save you and your guys a ton of time! No more marking or measuring required! Reach out to me to discuss if you're interested;) innovatools.ca/product-category/just-bend/

makes it look so easy..an artist..measures with eyeballs..very nice job

Just leave it in the box. Cut out a slot and pull it out as needed.

I am an IT guy, but an armchair Google expert :) so take this with a grain of salt. Would a backup like a pit with gravel in case of a power or equipment failure have worked here? Maybe go down a few feet and fill with gravel to absorb water and allow it to drain out into the soil just in case something fails? power etc? or even if the pump is not keeping up.

Over time, does thermal PA Flagstone gets dirty like natural cleft PA Flagstone?

250 psi per second.? ASTM standard is 35 psi / ps. + - 7 psi

My problem is with tree debris clogging the drain.

Sounds expensive

Overdue to change this neoprene pads and review the ASTM testing procedure. Horrible testing practices.

Thanks for telling us all the tips... not!

NICE CRACK!

so you didn't actually show capping. you just made the cap

you need to be more educated before making this video guys

Soooo the way to replace odd sized doors is to hire this one company? Fail.

You killde me first you build a colon .30 metro underground a side vein with steel bars as the colons are .30 metro underground and going up a 2.20 metro up now you left a steel bars from the vein up two 2.20 metro up as you add the rock and breaded the steel bars two top it of neon lights

Get your FREE estimate for all your home remodeling needs! buff.ly/2BOIU1N

Might want to do this walkthrough away from all the noise

I see a lot of people saying don't drag it on the ground or rocks etc... Right if ya using anything besides G8 scratch resistant coil!! As far as his speed lol, it's a demonstration video not a speed thru lol

kzbin.info/www/bejne/jp7QlXqfes1kg9k