shelbygt350r

Пікірлер

@SiThu-er4ry 8 күн бұрын

She's a beauty!

@shelbygt350r 8 күн бұрын

Yes it is. It will be going on Bring A Trailer within the next month.

@dougpeete2712 5 ай бұрын

Is it passenger side only?

@shelbygt350r 5 ай бұрын

You can use it on the left side of the drivers seat however it may impede entry and exit if you are not nimble.

@dougpeete2712 5 ай бұрын

@@shelbygt350r nimble? Probably not a term I get called a lot these days. But it is for a Spyder with the LWBS (GT2 buckets), so there is some contortionism involved! Thanks for the quick reply.

@jejakt 8 ай бұрын

Hi what type of oil do you use in the flush setup?

@shelbygt350r 8 ай бұрын

I am using Mobilmet 420. It is the same as the lathe uses. I tee off the pump line and install an inline filter.

@jejakt 8 ай бұрын

Thanks for the reply@@shelbygt350r

@bobdutton8076 9 ай бұрын

Where do you buy these. 1988 911 Cabriolet

@shelbygt350r 9 ай бұрын

Bob, you can email me at [email protected] or here is the ebay link www.ebay.com/itm/203068192877

@Bitterstone3849 11 ай бұрын

Sweet ! Now if it were only sitting in my living room. 🏁 😍

@juanclavel644 Жыл бұрын

La moto preciosa. Pero la carburación desastrosa. Necesita una buena puesta a punto de mezcla debcombustible y aire

@kidnplaye4630 Жыл бұрын

Whats valve lashser at? What rollers rockers?

@shelbygt350r Жыл бұрын

Lash is Intake .022 Exhaust .024. Rockers are Crane aluminum rollers with 1.73 ratio

@gordocarbo Жыл бұрын

@@shelbygt350r Blast to drive no? Nothing like a solid roller

@shelbygt350r Жыл бұрын

Yes it is a blast to drive. Love the solid roller and sound of mechanical valve train.@@gordocarbo

@juanmiguelgataberruezo9774 Жыл бұрын

Preciosa moto "made in Spain"

@thomasm8699 Жыл бұрын

VIVA BULTACO !!!1

@fernandovazquezperez6769 Жыл бұрын

KZbin una en los años los años 72 y el alpina 250

@MonkeDaMemer Жыл бұрын

Any way you could make one for a 2008-2013 BMW M3 E9x?

@shelbygt350r Жыл бұрын

Can you send me a couple pictures of the front of the seat track with the seat all the way back? Also measure the inside of the track from side to side. Send pictures to [email protected]. Thanks

@shelbygt350r Жыл бұрын

If interested you can purchase this cupholder directly by emailing me at [email protected] or via ebay at this link. www.ebay.com/itm/204232885935

@connerdubay9976 Жыл бұрын

Do you have it available for purchase?

@shelbygt350r Жыл бұрын

Conner, I do sell them on ebay and here is the link. www.ebay.com/itm/204232885935 You can also contact me by email at [email protected] to purchase direct. Thanks Greg

@miruenaplateroestrella5453 Жыл бұрын

Esta es la que tengo yo en Ávila

@Braycat 2 жыл бұрын

The most iconic bike I even had - a wonderful machine.

@shelbygt350r 2 жыл бұрын

It is a cool bike. Light, nibble and a blast to drive.

@mickexplorer 4 жыл бұрын

Nice

@retrobox1826 4 жыл бұрын

Visita mi canal, Box Retro

@jillsmcfarland2001 4 жыл бұрын

Beautiful

@longbellycaster 5 жыл бұрын

Could you possibly do a video on the spiders you built for the HLV I have the save lathe set up for collets and your setup is beautifully simple

@JobSpetter 9 жыл бұрын

Would you have any interest in selling this car?

@shelbygt350r 9 жыл бұрын

Job Spetter I may consider selling but realize that this is not an incomplete restoration and therefore it is not a cheap car. You can see more of the build at my website www.uniquemotorcars.net Thanks Greg

@shelbygt350r 9 жыл бұрын

Yes this was hand made except for the X pipe which I purchased. Exhaust pipe is 2.5 inch and the mufflers are high performance bullet style. I do not recall the manufacture but could look through my receipts if you really would like me to.

@SuperFisch16 9 жыл бұрын

I assume the exhaust system was hand fabricated? I don't think the commercially available GT350 system can fit with the x-pipe in place. Are measurements and muffler part numbers available. This is exactly what I want on my car!

@bulldog32220 12 жыл бұрын

nice car but you should try to find a correct air cleaner

@shelbygt350r 12 жыл бұрын

The engine is a 289 stroked to a 331. AFR alum heads, Mahle 12.5 -1 custom made pistons, H beam rods, ultradyne solid roller cam, studded and girdled top and bottom, Crower roller rockers, 650 race demon carb.

@shelbygt350r 13 жыл бұрын

The wheels are vintage wheel works 45's. 16x8

@jayandshel 13 жыл бұрын

Stunning car,what size are the wheels and what manufacture they look fantastic

@shelbygt350r 13 жыл бұрын

@imarealist101 Thanks for the comment. It is a very fun car.

@highspl 14 жыл бұрын

Beautiful machine !

Ең жақсы KZbin

Пікірлер