our pleasure ;)

Avec plaisir 🙂

P40% V120mm/s or 7200mm/min

Lol the soft is really easy to use. If you found a 3D scanner with a simpliest software, let us know.

Yes aucun problème pour Cédric. Si PB carte mère il faut contacter la marque direct.

You mean frame with a lower laser power ?

Yes, would that let you see the laser dot in the framing so you can tell exactly where the laser will cut or engrave?@@nozzler

@@1-Nice-Guy I don't really know because for now I'm using exclusively the camera to place the files. I will check and update you

@@nozzler thank you!

lol

@@nozzler🤣😋... but on a serious note now, how would you rate quality of the prints on FF 5M ? I have hard time to decide between FF 5M and Qidi x-smart 3, same price currently. One has slightly higher build volume the other is fully enclosed 🤷‍♂️

@@photo_n_art The best thing is to read the complete review article. Link is in description. Qidi X-Smart 3 is also reviewed on Nozzler, so you can read the review too ;)

@@nozzleroh man, now you gonna make me read?! Anyways, thanks and keep on keeping on 😎👍

@@photo_n_art reading is a good thing ;)

lol en meme temps c'est la seule étape du montage, et c'est hyper chiant. Au moins vous êtes au courant

Always a pleasure for us

Hey ! I will check what figure I can get around me. I don't have a lot of this....

I will think about it, but it's only selection tools. And the software is really easy to use.

That's exactly the point. the shaky smartphone camera for screen recording is very good for getting dizzy spells. but thinking is good in any case.😸@@nozzler

​Lol I didn't get your point. What smartphone camera ?@@r.f.966

Hello, I was the one who tested this machine. The probe never touched the part during engraving. Your problem may be that the piece of wood or other is not straight (warped). This can happen if you focus at the lowest point. In this case. try to clamp the part as best as possible to avoid this problem.

I was cutting, so the focus was in the middle of the 5mm wood, so deeper than engraving. The wood is fairly flat. A few others I've spoke to have the same issue.@@pro-stl5720

@@Ziplock9000 sorry I meant cutting instead of engraving

Sorry I don't understand the question

Hello ! Je mets un message à Luke Ze Printeur qui viendra te répondre au sujet de cette machine 😎

@@nozzler Merci c'est sympa ;)

Bonjour Drbazik, Tu peux laisser le contour de protection, c’est pratique pour jeter oeil même si tu n’as pas les lunettes sous la main. Pareil, il vaut mieux laisser le cône, ça protège quand même la lentille des micro projections je trouve. Après si tu peux brancher un petit compresseur c’est déjà mieux que rien pour la découpe👌

Hello Luke merci pour ta réponse, j'avais remarqué déjà un petit dépôt sur le cône mais comme tu l'explique c'est mieux sur le cône que directement sur la lentille Oui j'ai un petit compresseur d'atelier, certes ca fait plus de bruit mais au moins plus polyvalent :)

No it's print before the upgrade. Look at the complete review : nozzler.io/test-de-la-kingroon-kp3s-pro/

indeed, it is a very good product

of course, you simply have to cover the plate with black paint beforehand.

Yes, but you honestly can't ask a Smartphone like to work like a Gaming computer

it's 14 minutes in this case

The complete review article will be release soon

With pleasure

Je parles pas Allemand. La vidéo est sous titrée et il y a la notice d'emploi et l'article de test complet au besoin.

Bonjour. Le tableau indicatif est fournis à la fin de la review : nozzler.io/test-du-graveur-laser-sculpfun-s30-pro/ Bonne journée

lol. We hate this kind of comment, so we are equal now. What explanation do you need ?

@@nozzler just saying, if you could explain which screws, nuts, and sections you are putting together it would be helpful. I just got this engraver and there are literally no good assembly videos. The manual as you know it's not very helpful.

​​@@sono1452Hello, I am Jérôme, the person who tested this machine for Nozzler. To help you, you will find short video tutorials in the SD card supplied with the machine. I also invite you to read the article on the site there are photos and some points of detail which may perhaps help you.

Bonjour. J'ai plus de souvenir. Mais il faut préparer son fichier sur inkscape.

merci quand meme

Of course

The resolution will increase with the Turntable. It's always a big option who helps 3D Scanner Accuracy. Check on the review article for the current Accuracy demo. It will be update with the turntable and the handgrip

Hello Jose. Thanks for your reply. Unfortunally I don't test the Mole, so I can't compare. But, this video was made witht he first SEAL compatible version of JMStudio. Software is a great tool on accuracy for 3D scan, and I'm sure the next updates will increase the precision. This video will stay here, because we do not lie to customer. The other important point, is the scan's mode. In this case it was Rapid Scan. The new turntable mode will aslo increase the precision. So let's see in the near futur !

@@nozzler yes, I hope they update the whole software so they can really use the power of the scanner

imo theres not a single thing thats shown me something thats better then other scanners out

very interesting

Like this model ? I need to upload it on Sketchfab

Yes, that would be great.

I'm interested, but won't buy it until I have a few raw models to look at.

@@waterdonkey Hey ! Sorry for the delay. I add 2 more file to my Sketchfab account. You can see it in the review article : nozzler.io/test-du-scanner-3d-seal-3dmakerpro/

Hey ! It was the SEAL. I will update the description with the information

C'est comme la coupe mulet : ça s'invente pas, ça se vie !

of course ! :) The complete article will be here : nozzler.io/test-du-sunlu-filadryer-s4/ As soon as possible

Hi there, Could be many issues... Have you updated the FW? Activated the Time lapse and set the TL mode? Are you using the apps or the web interface?

@@ironfitz8626 I had just bought the camera and didn't realize that it only recorded videos that were started from within their app (or web interface). I thought that the connection between the camera and printer meant they were working entirely together, which is not the case. In fact I discovered that once you start a print with the app, you better not forget you did and start changing anything through the printer display during a print as bad things might happen, in my case I did this when I tried to change fan speed or something on the printer display after having started it in the beagleprint app, the extruder just started moving all around and then started vibrating badly on the bed. Anyway timelapes seems to be working now. Thanks

Bonjour. Ce n'ai pas l'imprimante que j'utilise le plus parce que j'ai une V400 qui me permet de plus gros volumes et je préfère garder la petite pour du filament plus technique qui nécessite le caisson. Pour le moment aucun problème de mon côté. Important de faire attention en glissière en fibre de carbone qui ne doivent surtout pas être rayées. Bonne machine pour le tarif.

It’s Tenaflex TPU. Medium flexibility and high resistance ! Printing temp: 230ºC - 240ºC. Bed : 60 -90 C ( depends on the surface) Print slowly (30 a 40 mm/s). Much difficult to print than PLA

yes. C'est le nom du fichier fourni par la marque. Après en modifiant 2 ou 3 paramètres on rentre dans les 15

It's the basic settings from the Creality slicer. Z distance 0.25, X/Y distance 0.8. I think the best way for the is to download it and check all the support settings.

Bonjour. Sur ce coup c'est du papier cartonné. Il faut changer les réglages en fonction de l'épaisseur.

@@nozzler Merci pour l'info, pouvez-vous m'en dire +, quel est le grammage de ce papier et quels sont vos réglages svp. De mon côté j'ai une Neje Master 3 Max et je cherche à réaliser des découpes assez précises dans du papier type 220g

@@freed046 Alors je ne peux pas vous aiguiller la dessus parce que c'est du papier de recup et je n'ai plus le laser. Mais généralement les réglages de bases sont fournis avec la machine, ou par la marque. Après il faut toujours adapter en fonction de son medium.

Hello. Yes I used this printer for a time. I was using Cura, and it was working fine. The best way to ad the right profil is explain in the printer manual. If you don't have it anymore, you can download it on this page : nozzler.io/copie-sd-stock/

We will make some examples yes. Just wait a bit for the complete review

@@nozzler Great !! Thanks