Thanks for making this video!

Thank you for a simple solution! My new machine was delivered today, model #9960, I'm very disappointed in the quality. I had to adjust the plastic case as it wasn't fit together correctly. Then as I was going thru the basics I lowered the feed dogs. Nothing happens when I move the switch to rise the feed dogs.

Thank you. All the other videos showed the relay on the steering column itself

Much obliged! Although I’ve only done a small test so far I noticed improved feeding! When cleaning the dust and lint out, my personal preference is to use the included brush and/or Q-Tips, with a vacuum cleaner (smallest attachment you’ve got) in lieu of compressed air

Thanks so much for this video! I have never repaired utensils, but with your video I have confidence that I can do this! (fingers crossed).

Thank you, exactly the help I needed!

Thank you for making this!

Was the needel thread getting caught in the bobbin area or what exactly was happening? I am wondering if I need to do this..

I was being lazy and didn't bother to unplug the unit before swapping the motor. Ended up tripping the breaker/ GFCI. After resetting however the microwave was still dead. Only to find hidden behind the control panel along the door latch mechanism is another ceramic 20A 6x30 fuse. At first thought the control panel may have gotten burned out since there was still power coming into the machine. But as a safety measure the exhaust fan will bypasses that fuse and still run automatically in case of a range fire.

This video was a big help to me. My wife has a different model and my resolution was different, but this got me started in the right direction.

Nice job

Thank you!!!!!

hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh ok

I'm hoping replacing the turntable motor on a counter-top model works the same way. Your video was very easy to follow. Thank you & God bless, Linda

Thanks rich will doing mine soon

This gives me a little more confidence in changing mine. Thanks a bunch!

Which way did you turn it?

in my case, the feed dogs were worn out. i wasn't aware this was a part that needs to be replaced every 1-2 years. it feeds, but not well, i usually have to help the fabric along. (singer 2277). i realized this when i got a brother se600 and the feed dogs were actually grabbing the fabric correctly, especially in reverse. the singer didn't do that at all. $10 fix.

Mexicali

Thanks 👍

You are my heroooooo! Thanks Sr !!🌸👏👍Have a Blessed day.

Well this video kinda helped .. basically my feeder feet thingy didnt move fabric back as it should but when i opened to see whats under the hood . It had none of the things it was supposed to from the video however i noticed that without the htread attached it worked just fine so i adjusted my thread tention on bottom bobbin and it sews great now :DD leaving this just incase someone has same problem and actual problem is not the feeder but tension messing up your feeder.

Thanks for making this video. Definitely a confidence boost for a DIYer

Great video and explanation of the problem. I just resolved on my wife's machine that was similar except it had a slotted head rather than allen key for plastic screw. I faked my way through it before seeing your video, but you helped me ensure that it's really fixed. You might note that lifting the other side of the "feed dog" mechanism makes the plastic screw and locking nut easier to adjust.

I recently bought a M1000 Model and the dog material feeder was made of plastic and it cracked after 2 weeks of use. The bad news was Singer does not even list the part !

Your innocent humor and kind way of explaining was very nice. Thank you

Thank you! I was able to adjust my feed dogs and raise them enough to do their job properly.

I thank you very much! I have the same machine and couldn't figure out what was wrong. I know now I caused the problem by digging thread knots out of my feed dog because of a fluffy snuggie I was making out of a fleece blanket. After digging out fuzz and knotted thread a few times my feed dog quit working. The fix wasn't easy for me as I unscrewed the nut too much and dropped in and then had to retrieve by a magnet too many times. I closed the machine up and guess what? it works , even without the nut. I'm sure I'll have to get it on eventually but I am thrilled to have my feed dogs working again. It's touchy getting things adjusted just right, but I finally did it. On another machine I had to take it to the shop to fix the feed dogs and found out there was a screw that had fallen down in it. Thank very much for your video!

Nicely done.

That one doesn’t work for me I need to adjust the feed dogs and a different way because it’s not working

Mind broke I don't know what to do. Please 🥺 help

My man, thank you for posting such a comprehensive video. The info is solid and the editing made it so easy to digest. Can confirm...10/10

I just recently had a problem with my feed dog and your video really educated me, as I was not able to find any information other than your video. Thank you so very much. 5/8/21 from Florida

All day I've struggled with my machine wanted to throw out the window. Yeah it's working now. Thank you

Nice. This worked for my wife's machine. Go easy on the plastic screw though. Mine was flat-head rather than allen key. Thanks muchly.

I am glad that I look this thanks happen to me new out the box have the problem with the brother sq9285 Have the switch on the back

God bless you!!! My pretty darn new singer quantum stylist 9960 stopped feeding fabric a few days ago.. When I went to clean it out and just look to see if I could See a problem, i did notice that little nut thingy was loose!! I tried tightening and loosening it then trying to sell that did nothing!!! SO thank you SO MUCH, I didn't know you could tighten the white part so thank you so much I do not have the money to take it in for an expensive repair or even a cleaning and oily!! I have to do all that myself, wish is scary, but so far so GOOD God bless you, you save my life and my sewing machine. Lol. Jk Ok maybe not my life, although I can't live WITHOUT sewing/quilting...Much appreciation and prayers from Jennifer and Bakersfield California

You're absolutely awesome! This just happened to my machine and I did everything I could and the switch wasn't working so I figured I'd find it on KZbin and lo and behold yours is the first video I saw and is exactly what I needed. Thank you thank you thank you thank you thank you thank you thank you thank you!!!!!!!

DON'T BUY SINGER QUANTUM STYLE 9985 CRAP problem after problem now it looks like i just broke that little screw for feed dogs and no replacement part now what my husband is going to snap

O.k the first time watching your video great i fixed them but this time i did what you said not to do so now i think it's broken right??? I can't seem to put it back on right.

Thank you so much!! This video was super helpful

This is a great video. I had the infamous *59 second* issue with this microwave and, the oven had to be removed and partially disassembled for that fix. But, we now have the turn table cease to work and, hopefully, it will be as easy as this video shows. I surely appreciate you taking the time to make and show this video. Very much appreciated. SR

Many many tx for your brilliant demo.

Thank you so much for showing me that little plastic piece. The pin that was being held by it, fell into my machine. You pointed me exactly in the right direction to find the problem. Thank you!!!

Hello! What size Allen wrench did you use?

Cant thank you enough for this my machine has been broken for months and I risked paying quite alot to bring it to the repair store! Your my hero!!!

Like he said, don't tighten too much because it will break. Singer discontinued that tiny screw so there's no replacement. I've scoured the net and cannot find it.

Rick can you help me? I have a Legacy C440 and the screw you are adjusting mine is nylon and it broke in half. I can't find a replacement anywhere. And most people don't know what I'm talking about. Where can I get the nylon screw? Please help... wisingerrenee @ gmail.com

Thank you! I have a four day old 9960 that had stuck feed dogs! I say “had” because your video solved the problem!

Thank you so much Rich. It’s about 2 am and I have a project to finish for tomorrow and that’s exactly what happened with the feed dogs. Your guidance was a life saver. Thanks for being a Good Samaritan and sharing your knowledge. A very appreciative viewer. Best to you and Blessings, Rosita