Foden S36

Пікірлер

@stephanesittler3283 22 күн бұрын

Super, nous avions la même avec une botteleuse intégrée à l arrière

@neilfoster814 24 күн бұрын

Those Perkins 6.354 engines are bloody good engines. I had one in a 40ft seagoing boat, never had a moments trouble with it. At 1,750rpm it would burn a gallon an hour. The boat wasn't terribly fast (9 - 10 knots) but it had the power of a tug boat! They are a nice sounding engine.

@FodenS36 22 күн бұрын

It took some getting going but is getting better every run and starting to sound sweet

@MarkLowndes-uo8dv 29 күн бұрын

Be careful running that set under speed unless you've taken the fuse out of the AVR board in the generator end. I would think it should be 1500 ,- 1530 rpm

@FodenS36 28 күн бұрын

Thanks for the advice, Iv not done anything to the generator side yet

Ай бұрын

Needs a good run on the loadbank to get all the oil & carbon cleared out

@WineScrounger Ай бұрын

Did you get any idea of the electrical output? It sounds like it’s running slow as if the governor isn’t working right or perhaps not adjusted properly. Sort that out and you can see about the rest of the generating gear.

@FodenS36 Ай бұрын

I had the revs turned down, not tested the generator side yet but it’s rated at 75KVA

@stevehill4615 Ай бұрын

That T6354.4 looks a pretty fair engine for how long it's stood, looked and sounded like a fuel system and general service should do it a power of good, then wants running under load and on boost to clear the insides out and it should be a good generator pack.

@FirParkFarm Ай бұрын

Thanks for coming 😊 was lovely seeing so many people

@FodenS36 Ай бұрын

Thank you for letting us come and enjoy your hard work ❤️

@padraigholohan4778 Ай бұрын

Poor Starter!!

@FodenS36 Ай бұрын

Certainly was after being stood for 15 years and seized solid 😂

@mnshp7548 Ай бұрын

might be worth running it on atf for abit as that can help clean up any dirt in the injectors

@FodenS36 Ай бұрын

Not heard of that before 👍

@WineScrounger Ай бұрын

@@FodenS36 I’ve no firm evidence to support it but ATF has a very strong detergent package. A bit in the fuel should help loosen up the clag a bit.

@Initttttt 3 ай бұрын

Sorry mate never driven one so very much intrigued! How do you fetch the 12 out of what looks to be 4 gates. Are you footing the clutch halfway and all the way once you’ve flicked the selector on the column. Cheers mate great vid 👍🏼

@FodenS36 2 ай бұрын

It’s Fodens own gearbox, 4 on the gearstick and 3 range change on the column. 4 low range, then 4 direct each with an overdrive. So empty you can not use the low at all. So 1D 1H 2D 2H etc. takes a bit of getting your head around but it good when you do. Yes you clutch after you’ve flicked the selector from direct to high. To change from high down the direct you can just blip the throttle. It all gets more interesting with a load, I could only imagine what it was like with 80ton behind 😂

@LawsonOsborn-g3p 4 ай бұрын

Schowalter Grove

@stevedawson256 4 ай бұрын

I was weined on an s36, got a soft spot for them, wish I had the chance to drive one again, absolutely love those lorries.

@mrfarrant3342 4 ай бұрын

❤

@LisaTalley-e5m 4 ай бұрын

Rosenbaum Vista

@HendrikWilliamson 4 ай бұрын

Hi a have a similar concrete mixer- im from South Africa.

@jmpsavescars 6 ай бұрын

What a machine thats about nine times the size of the one ive brought back from the dirt!

@thomasarmstrong3804 6 ай бұрын

Serious Muscle

@leebrowning3668 7 ай бұрын

Pull away in third low with a Gardner first or second inter mediate with a Rolls or Cummins

@rahimtarhan4298 7 ай бұрын

Merhaba yedek parça lazım bede aynısından var

@edmcelhone4501 7 ай бұрын

looks like maybe a little hard to grade with

@mitsatoby 8 ай бұрын

fooookin ell

@edwardking9989 8 ай бұрын

Brings back memories of ,driving,R&W Febrys breakdown truck brilliant,once I mastered the 12 speed gearbox, proper truck,no power steering halcyon days.

@KrisDouglas 8 ай бұрын

Are you bringing this to Listerfest at Apedale? If you aren't already in the group, join Lister Autotruck Owners and Fans :)

@FodenS36 8 ай бұрын

No I don’t think so, Iv been to that show.

@markosmith8037 8 ай бұрын

great uploads.

@FodenS36 8 ай бұрын

Glad you like them!

@Meene_Lindner 9 ай бұрын

Beautiful 🙂

@FodenS36 8 ай бұрын

Thank you! 😊

@georgebeltran3742 9 ай бұрын

Are these road legal

@FodenS36 9 ай бұрын

Yes it is, taxed and insured for the road. Though you wouldn’t want to go far.

@Olexandr0485 10 ай бұрын

Який двигун встановлюється на цей бульдозер ? Дякую !

@FodenS36 10 ай бұрын

I believe it’s a Rolls Royce diesel

@ancientbriton8262 11 ай бұрын

1967 reg, great little machine back in the day 😊

@dirkmaronn Жыл бұрын

So eine schöne und gewaltige Maschine.

@stevedawson256 Жыл бұрын

Call me bias but that is the prettiest lorry ever made. ( first one I ever drove and the best one too)

@stevedawson256 Жыл бұрын

Brings back great memories

@MrHarleyoldfart Жыл бұрын

I think you might do better if you used the 12 speed box as it was designed to be used, why do you not use the handbrake?

@FodenS36 Жыл бұрын

I’m certainly no expert and always open to advice on how to improve.

@onanysundrymule3144 Жыл бұрын

Awsome and marvellous.

@blokeinashed Жыл бұрын

Really helpful video: I have just bought one of these to restore.

@FodenS36 Жыл бұрын

Glad I could help

@willemgjaltema2996 Жыл бұрын

Great #theNetherlands

@petermccurdy8370 Жыл бұрын

just found your channel Chris, pleased to see the little Grove getting used. Keep up the good work.

@FodenS36 Жыл бұрын

Thanks Peter, hope your well.

@carlosredlick934 Жыл бұрын

Jnnfz Cvjkhjlllñ

@ValMartinIreland Жыл бұрын

Pity about the stupid wind turbines in the background.

@sammyreyes63 Жыл бұрын

What's the story behind the engine? What carrier? How was it acquired? Any details? This is pretty cool!

@FodenS36 Жыл бұрын

I don’t know which carrier, it ended up in Australia after the war and worked there driving machinery. There was a info board on display with the engine but can’t remember the finer details.

@andrewklahold2880 Жыл бұрын

How bad was it ???

@gary24fan Жыл бұрын

Pretty much the design used for the very first "Matchbox" vehicle ever made in 1953.

@FodenS36 Жыл бұрын

I didn’t know that 👍🏼

@YorkshireLassUK Жыл бұрын

Aww I missed this! Was gutted not getting a video! Sounded and looked mint

@FodenS36 Жыл бұрын

Yeah I wish I could of got a full video of it, amazing thing to see and hear close up

@michaelkeen5010 Жыл бұрын

Great video.👍

@FodenS36 Жыл бұрын

Thanks 👍

@GrumpyTim Жыл бұрын

You know you've got a proper engine when it needs a tractor to get it started!!! Great bit of footage Chris, what an engine!

@FodenS36 Жыл бұрын

It was very impressive to see 👍

@kimber1958 Жыл бұрын

nice truck

@enginelover1 Жыл бұрын

These are very nice machines. I often use mine around to transport water.

@djlau1 Жыл бұрын

id love to know what the waight of the flywheel is!! looks like it waights more that 10 lorrytrucks

@davidhynd4435 Жыл бұрын

Fascinating machinery to watch. Thanks for the video.

@marcusw.525 Жыл бұрын

My goodness! What a sound. I'd love to have one of them Fodens. Too bad there aren't any where i'm from. Also 100th like!!! Is that an Eaton box or something else? It seems to go well with that old Cummins. Are the diffs from Foden (tandem drive)? I wonder what it can reach. It looks like it will do about 45mph. I hope the old girl is still going strong to this day. Stay safe buddy and keep er going.

@FodenS36 Жыл бұрын

In my slightly biased opinion this is the best sounding truck out there :) It’s a Foden 12 speed transmission with Cummins 220 engine. Fodens Diffs double drive with double reduction hubs plated for 80tons. I haven’t done much over 40 but have been told by an ex driver it was capable of 60mph+ if you are brave enough. Still going strong 💪 Thank you.

@nicolaecristea9675 Жыл бұрын

Minunat

Ең жақсы KZbin

Пікірлер