Quick and easy solution! Worked for my two car garage door. Thanks

Worked! Thanks so much for this hack! However and unfortunately, the steel brackets were twice as expensive as yours at my local Home Depot

You sir are the real MVP !!! My garage was popping so loud, people thought it was gun shots. I had dogs and their owners taking off when my garaged opened or closed. Thank you for sharing !!!

Just purchased same ones at HD for $80 for both going to try out this fix and let you know thank you. Tried it out and it works great except the middle holes didn’t line up so I just secured them by using the bracket bolt and pinching the middle part of the bracket

This was the 10th video I reviewed. Well worth The effort

My local home is selling those bracket for $65. unbelievable.

thanks. subscribed

Thank you for this video!

We're being ripped off to do things ourselves because we can no longer afford to be ripped off when we don't. They figure, nobody flinched when we started stealing the money being passed out by the dim-witted president, so why not keep jacking up prices until they can't afford their own homes, then buy their homes w/all the money we stole and make them pay monthly for everything they no longer own, for the rest of their lives! 😃🤑💰💵💸

Thanks much!

Thanks for the fix. Last adjustment cost me $300 for a 10 minute adjustment which didn't do much by a local garage door specialist recommending a new garage door. Went to the local hardware store and cost me $120. Works great.

Thank you!!! Help me out

Those bolts that you had to remove and install the new parts with.... does your bolts tighten all the way down and stop turning or do they continually turn? I thought my problem was that the bolts did not tighten down to a stopping point, but all my bolts are like that, even where the door dot NOT buckle.

Worked great, however the steel angels were over $40 each at home depot .... Inflation

Just found this and did it today on 2 hinges though. Fixed it immediately! But, I still need to replace my doors because they are cracking and ripping.

Saw the video tonight 04-03-24 08:00 PM... Went to HD bought the bracket $59.00. Installed on sagging panel, tested and done @ 09:15 PM. BIG THANK YOU! It worked!

You sir are very lucky. Mine is absolutely ripped to pieces. I have spent two years trying to fix mine. I use the same message that you used with the slotted angle iron but at my local Home Depot $59 a piece for an 8 foot section and I have a 16 foot wide door just like you, mine is buckled and ripped to pieces all the way down the center. If you open the garage door all the way it will buckled till it’s a foot from the garage floor itself and would easily cave-in and fall. It has cost me almost $1200 to buy every piece of angle iron that I need, I have two 8 foot sections of angle iron on the top and bottom side of each panel in the center then I have two 4 foot panels, top and bottom on both the left and the right side of each and every garage door panel. That’s what it took me to fix mine. In total, I had to buy eight 8’ angle iron sections and 15 4 foot sections then I had to reinforce the backside of everything. Still cheaper than paying an overhead door to come out and re-install a new one for $6000.

Omg! I needed this video, thank you! This will be perfect until I can replace my door!!:)

Thanks for a great idea. I bought 8 ft (11/2' x 96 in) at menards (SKU: 2289232) for 25$ and tried on my 2 car garage door. I am trying to keep the angle in the center of the door. Only 2 of the holes align with the hinge of the door unfortunately. I don't know if HD's would be any different. Any ideas ?

Thank you for this video. Fixed my garage for $52. Thanks for sharing.

I just bought one piece of angle iron, 8 feet long at Home Depot and paid $44 for it. Thanks Joe Biden…🤬🤬🤬

Perfect solution, thanks for taking the time to share.

Thanks, I never knew sagging could cause this.

Thank you so much for this. My garage door was so noisy and the hinges have broke twice. I tried this fix because the next step was to have a garage specialist replace the whole thing. This worked and saved me a lot of money. Thank you!

Thank you!!

This was easy but now the slotted steel is $41 for each 8footer. Maybe could have gone with just one? It's up. It's functioning perfectly. No hinge replacement was needed. I'll stick with the 2 bars. Thx for this brilliance.

Great video!. I did the same trick to fix mine although I wish the angle bar were still $13.00 bucks. Not the case now how about $42 bucks a piece!

i had a very similar damage to my garage door panel.I bought two steel angles after watching this video. I followed the instructions in this video and it took only about 20 minutes.

Just did mine! $40 a piece for those bars from HD, they did the magic. Thank you, very helpful.

Bought 2 and a new hinge and worked like a champ! Thanks!!!

I think this is exactly what i needed. Nice and simple and no calling a service tech $$$$ Thanks a lot!

Why does the door start sagging in the first place? I've looked at mine several times, but can't figure it out.

I bought one zinc-plated angle and that did it for me. $41 at Home Depot on 4/2/23. Thank you!

He could have found 200 lbs then snapped half the other😂😂😂

False way to find torque spec. You are only finding out what those bolts were torqued to. There is a chart for All bolt sizes types that tells touqe

Worked like a charm-so happy! Thank you! $120 for 2 8’ struts at HD today.

Great work Tim How are they holding up? Next time, buy a steel Brace/Aluminum fitting that goes across the entirety of the garage. I can tell when you opened it, it was putting a lot of max load on that area you braced. Eventually it will put some pressure on your springs and it may cause you to prematurely buy new springs earlier than you have too. Great explanation and detailed information. So many people on here don't give enough information on where to buy the supplies ect. Did you brace these steel angles over the hinges with the same screw? What type of tool did you use to screw these screws in?

Same steel angles are now $60 for one at HD. WOW

I have questions. My door is "buckling" and I'm not sure what to do about it.

Hey. Thanks for video. Menards sell 16ft garage door support brackets for $20 .

thank you for this video. my garage door is 16 feet wide (2 car garage) and the torsion spring broke and the top panel bent and buckled. I replace the torsion spring with 26 quarter turns and the top panel bent more because the 16 foot cross thin support also bent. I went to Home Depot to look for this angle bracket in 16 feet long but could not find one. BTW, the 8 feet zinc plated angle bracket by Everbilt cost $60 in Washington, DC - October 31, 2022. Since I see this video I am going to buy the $60 8 ft angle bracket. I will place this at the very top of the top panel where the crack is. I called some garage door sellers in the area and recommend to replace the entire garage for thousands of $$$$.

It does not mean that the recommended torque specs is 65 lb, but you going what the previous owner torque them too. You could have found 20 lb... You should use Dexter's Product Bulletin #409 to get the correct torque specifications for all kinds of trailer wheels. hltlimitedtrailers.com/wp-content/uploads/2019/10/Dexter-Wheel-Torque-Requirements.pdf

Excellent, I did this and it works good. Save me headache and maybe a new door. Thank you for this video.

Thanks for the video. This method saved me a lot of money.

you said the hinges were broken, but didn't bother to show them to us so we would know what a broken one looks like. thanks for nothing.

Thanks much. Worked like a charm.

Thanks!!!!! I have been having problems with my door for months. This fixed it! By the way, as of June 2022, the 8ft bar I got from from Home Dept was $44. It was well worth it. Super easy fix.

Worked perfectly!! Thanks for the video!!

You may need to adjust your rails. It still jumps when it lowers. Your pulleys may be worn too

for inflation, the same steel bar costs 50 bucks now