You guys can use the Oscilator cutting. It will not have sparkling fire. Thus is the best method i like to do it for my car. Thanks for sharing
@khaidang276 ай бұрын
Why did you need to replace O-ring?
@nealhere10 ай бұрын
how tight do you tighten the nut when replacing it
@nealhere10 ай бұрын
Plus you are the only one who explained how to do the quick disconnect for the fuel line.
@nealhere10 ай бұрын
Thanks for your idea i wish you great wealth and happiness all he best neal. Sw fla
@jasonashley985310 ай бұрын
Looks like this is an issue even on the newer ones. I have a 14 and have been smelling fuel vapors. Had it looked at underneath and no leaks down there. Im guessing it's this same issue.
@emmanuelmelendez584311 ай бұрын
Excelent job my friend. I have the same problem, I hope is only the ring
@THEOAKLANDBABY510 Жыл бұрын
Link where you bought your o ring gas cap
@Bootnerd3 Жыл бұрын
Good job kiddo
@honda8144 Жыл бұрын
Why glue it back it if youll need to do it again or the next owner lol
@Align700nitro Жыл бұрын
Don't try this if you have no idea what you're doing, the sanding wheel can and will ignite the gas vapor if there is big enough leak from the tank. And you will burn down your car probaly your house too. However, not a bad idea if you know your shit.
@felixpantoja3270 Жыл бұрын
What size is the connector, anyone here know?
@wayneatamanchuk927 Жыл бұрын
could you pull the pump out from there after you cut the hole open more?
@normcook9335 Жыл бұрын
Good that you were able to complete without an accident, but would not recommend this method. The foil would not prevent vapour ignited by a spark. The time saved isn't worth it (I've dropped the tank on this car and it's PITA too).
@ikawtubo3 ай бұрын
My 08 Mazda 3 AT 1.6 a grinder was used that had created a lot of sparks. Luckily job done by my mechanic. But lately i smell gasoline inside the car
@markdorokhov232 Жыл бұрын
yo what type of floor mat is that
@youtubemkgaming66285 жыл бұрын
What is the name of this medicine cut before use plzzzz
@sherrifrank39227 жыл бұрын
Pulling teeth why...this looks abusive to me
@CarmineRC7 жыл бұрын
Could you have done that any SLOWER??? Geez! Castration must be a really extended nightmare the way YOU guys are doing it!
@thealina36768 жыл бұрын
frumoasa
@Harutik20088 жыл бұрын
looooool. hahahahaah
@grilledchickenwrap9 жыл бұрын
do not follow this guy. if you must do this... atleast remove the motherboard and front camera and sensor or else you will destroy your phone ask me how I know.. I tried this first and saw that all the glue was going in the back and camera.. I removed everything right away and redid it the right way... all good now.
@garrywilliams35489 жыл бұрын
grilledchickenwrap should only need approx 2.5 - 3 cl of glue per phone
@Jorwa219 жыл бұрын
+grilledchickenwrap that´s te rigth way to do... using a loca mold!! otherwise it's to risky!
@lorrieschroder110110 жыл бұрын
Don't you use tape when you use LOCA? Do you have any trouble with glue getting to the button or speaker?
@CrOzLm10 жыл бұрын
What is Loca Glue Lamp UV for? I dont understand what it does. Cant you just take the loca glue and replace the screen without taking that blue light?
@ButterArrow129 жыл бұрын
otherwise the glue will not cure and leak out.
@CrOzLm9 жыл бұрын
ButterArrow12 Got the answer :)
@Jorwa219 жыл бұрын
+Alan Doski YOu can use direct sun ligth for 45 min. It´s the same
@tommyboy198610 жыл бұрын
Don't try this method, I have tried this method 3X with galaxy s4s and each time it has destroyed the phone from the loca leaking onto the logic board. The lcd has to be removed from the frame first.
@altisekizz9 жыл бұрын
3x ? wow you are a fast learner :) thx for the trick , it is a lifesaver .
@movilalbertobarea10 жыл бұрын
looking for a tutorial as a video recording
@mikimiki438910 жыл бұрын
7 fingers :D
@lekevihigginss10 жыл бұрын
Don't do this as it ruined my lcd after a week and the glue swaps into the back of the phone with could have cause even more damaged
@ugostepho10 жыл бұрын
Don't even try this guys if you are not a specialist. I tried this technique and fixed my screen perfectly but it came at a price worse than the screen I fixed. The excess glue stopped my speaker from working, my home button is glued, and the excess glue also seeped into the camera. My Samsung Galaxy S4 mini is messed up..Had I known I wouldn't have followed this technique. Don't do this inside the frame...
@PhoneFixPro10 жыл бұрын
Doing this inside of the frame is a bad idea. The glue can seep into the backlight and ruin the LCD after 1-2 weeks. Can turn LCD brown, or cause shorts.
@andrewstephenson908310 жыл бұрын
Damn you vertical video! This is never appropriate.
@ASweetSummerBreeze10 жыл бұрын
wtf
@mamaisgek1110 жыл бұрын
I need to do this to, but i have some questions.. 1. If you out to much glue, doesn't your homebutton gets glued? 2. What if it falls in the camera or sensors? Is the camera still clear? :/ i'm so scared to do it..
@kryssiegascon435810 жыл бұрын
Where do you find the adhesive strip?
@buchhaar11 жыл бұрын
I have the solution. I found a foamy seal. And put a stripe on top by the sobthe glue dont flow in the camera and the sensors andbone on the bottom so the home button stays dry. Works fine.
@freshfart11 жыл бұрын
Oh, after I got all the extra glue out, I placed the phone in the sun for about 30 mins.
@freshfart11 жыл бұрын
Yes fixed it and everything working fine. I put too much glue on and had to use lots of tissue and I kept squeezing the excess glue out from the side. The glue came out of the home button too but no problem. Everything is still working okay.
@oguzmehmet11 жыл бұрын
hi my friend. did u fix it?
@buchhaar11 жыл бұрын
I glued my glass on but had the problem that glue flowed to my home button and glued the button on. How can I avoid that?