I haven't checked, but doing from the video module info it seems to be.

See this listing for the sm-400 crt module . It suggests that there is a common video input. a.aliexpress.com/_EI9tLTD

Hi. The pump was making a ringing noise due to the valve spring being broken and there was barely any water coming out.

Hi, i am not an expert so I can not give you the exact information you ask. However if you heard a boom and a fuse is blown you should probably NOT just replace the fuse. It is not the fuse that is broken, but something else, the fuse is just there to prevent further damage.

Thank you so much

I have used this one to carry 50eurcent and 1euro coins as well. I've just made a new one new one for you. Check it out: www.thingiverse.com/thing:6323383 Contact me on Thingiverse; I would love to see the result if you make it.

@@MilanGajicBuva That looks great, thank you. I've never done 3D printing before (I don't have a printer). It is best to take the design to a 3D printing shop and then report back with the results?

@Needles323 i can't really advise on printing shops. But in theory it should work. It might be cheaper to get something off aliexpress to be honest.

Nee, goed uitspoelen en overtollige water uitschudden.

Actually, I did! ;-) Unfortunatelly shiny surfaces do not do well with photogrammetry. poly.cam/capture/ed9a7827-d2e3-435e-8992-b0ac5e2675bd

@@MilanGajicBuva I was curious how the dome would turn out especially because it is so reflective. Nice capture

@@ezearo honestly i am suprised how it turned out. usually reflective surfaces turn out hollow.

Ze zijn inderdaad identiek. Er was een bedrijf waar je je oude (nog werkende) motor kon inleveren en een gereviseerde voor terug kon krijgen met een bijbetaling. Even googlen.

@@MilanGajicBuvaDat bedrijf had ik gezien ja. Ik denk dat ik de lagers zelf ga vervangen. Ook gevonden met google hoe dat simpel kan. Ben je voor 30 euro klaar )) Bedankt voor je reactie 🤜🤛

@@Aaahjohneetoch dat is zeker ook een optie! Mijn motor was destijds doorgebrand dus vervangen was enige optie.

@@MilanGajicBuva zag ook ergens een set voor ombouw naar een aparte voeding voor allebei de motoren omdat de enkele voeding niet genoeg zou zijn. Als alles weer soepel loopt is dat waarschijnlijk bij mij niet nodig en gaat het apparaat nog jaren mee. Schoonmaken, lagers erin en gaan ))

@@Aaahjohneetoch klopt. Ik heb het niet vervangen. Draait al 20 jaar. 1 keer een kapotte motor gehad. Enige andere aanpassing is een wifi droogschakelaar op de badkamerschakelaar aansluiting (stand 3 override) om hem slim aan te kunnen sturen met HomeAssitant.

(to clarify, I'd just like to set it to low permanently without any toggle)

Yup ... just move the little "plug" to the low position ... hahaha , nihjtmare device

@@MilanGajicBuva awesome - thanks!

@@bilbs87 no problem. Good luck 😀

Mine is still working fine

@00:20 you can see the black hose attached to the carburetor. repeat for other three. It was a long time ago. If I remember correctly, you take out a screw and screw in the hose nipple.

I believe it was 12 or 13 volts.

Thank you. I did my best, it was for my kid, but i’m only so-so good at practical 3d modelling. I’m sure it could be made much prettier. It has plenty of power, but traction with pla wheels is a problem for inclines. Originally it had grooved wheels that tok rubber tires, but those had s much friction that they would not stay in the grooves and drove right over everything in their path. I’m sure with right fliction (relly thin tyres maybe) it would wortk much better.

@@MilanGajicBuva Thank you for sharing expirience :) I also faced the same problem with wheels. I tried to make tirs with silicon hermetic from buiding supermarket. At this moment, my idea is the front whhels shoud be plastic for better follow the track. And the back wheels should have silicon tires. If you would like to see my trials, welcome to my short videos :))

@@AleksandrIvin yes, front wheels should definately be plastic and loosely screwed on so they can wobble a bit. Forback wheelsi used 3-4mm silicon sealing rings as well, but they were too sticky. Just plain rubber rings, 2mm could be better, but I never tried it. I’ll look up your videos.

Different noise while grinding or while making coffee ? … im guessing while grinding. grinders should last a long time. Maybe the beans are not getting to the grinder? Is the beans hopper moving around and letting beans down to the grinder?

As you can see from the picture at the very beginning of the video, my replacement looked different than the original, but it is a ex5 230v model. I am sure there will be different voltages available, just take look at the specs on the original pump and get one with the same operating voltage .

I can’t find anything else than 230v on amazon when looking for “ulka model e ex5” but that might be because i’m in the netherlands. And yeah, i did replace it with a metal model, in my humble opinion it is more beterer, but i am in no way any kind of expert in this field!

@@MilanGajicBuva I double checked and the model that I find is a 120 V so, it looks that it fits our region. THANKS for your video and for your answer. I really appreciate it

@@Science3D you’re welcome… another fellow tinkerer saved from caffeine deprivation

I’m not sure what you mean… ?

I'm sorry but I don't dare say with certainty. However, looking at 3:40 the screws in bottom row, 4th box, where I seem to have put those front screws, seem to be longer and shinier than the rest. So you might me correct?

@@MilanGajicBuva Yeah, I ended up putting the 2 longer screws in the front. got it all back together thanks to your video. I did have to slow it down and watch a few times till I could see they were longer, but thankfully there was enough clarity to help me.

@@wrxsubaru02 glad to hear that. they really are built like a puzzle box and after taking it apart i was REALLY happy i video'd the whole thing ;-)

I can’t get the cap off for the life of me. So annoying!!

Did u guys make it? Get the cap off

Me too just i cant get the cap off. Help

Screen kharab ho gya hai to de do mujhe 1k mai

It did start glitching after a while. It is outdated now anyways and sitting in a box somewhere.