What type of plywood did you use? Thank you

Jealous of that shop

Когда у людей много свободного времени, получаются такие вот вещи!

Sick man, sick!

does it work for veneered panels?

Graphics not centered, redo and get it right.

Looks great!

Cool but this is a 2 minute toolpath draw up and you can array an entire set of them on a real CNC and go work on another project while it’s cutting them out.

สนใจครับ

A rasp could do it as well

I'm literally going out to use an Amana 1/8" point roundover right now, as I have to replicate a curved window casing.

The router, aka, the widow maker

I do a levelling scan in UGS if a levelled surface is critical

That's a complicated piece of paper.

Point roundover bits are amazing tools! This point roundover bit allowed me to get a larger roundover on this tray than I would have been able to accomplish using traditional roundover bits on a router table due to the height of the tray. To do this I set the bit up as an 18 degree v-bit in the Vectric software and cut a profile on the inside and outside of the line to the depth of the point roundover bit. I've tried setting this up as a form tool, but can't seem to get it to cut correctly, this method has worked for me every time though! Because the edge of the tray is already broken, I can also use an upcut bit for the outside profile for better chip evacuation and a cleaner side wall finish without worrying about chipping out the top surface of the tray. Check out the tools used on our website - Amana Tool 3/16" radius Point Roundover bit - toolstoday.com/v-11511-56126.html RPM: 18,000 Feed Rate: 60ipm Plunge Rate: 30ipm Depth of Cut: .18" Amana Tool 1/2" diameter 1/8" radius Bowl Bit - toolstoday.com/v-5661-45981.html Amana Tool 1/4" Upcut Bit - toolstoday.com/v-13780-46315-k.html i2R W.42 CNC machine - toolstoday.com/i2r-cnc-i2rw42-w-42-4-x-2-cnc-machine.html AirWeights Complete 24"x48" vacuum workholding - toolstoday.com/airweights-complete-system-24-x-48-vacuum-table-workholding-system.html

У меня такое впечатление, что он эту кресло качалку для ребенка, делал прямо в магазине инструмента!!

hmm handly little unit man, I'd actually buy one of these lol

I was hooked in watching the short and had to find the full video. Awesome! I picked up several tips like switching the JessEm guides around on the table saw fence with using it for the router table, GREAT idea!. Also love the way that it fits snuggly over the current bench top, no clamping needed to hold it secure. Didn't pick that up until I watched this video.

??????

С таким оборудованием я могу что хочешь сделать и не надо это показывать как будто это какая то магия

Does it take care of the bleed through as good as the shellac based …

Hi, I really like the work and methods you use on your channel, but I'm curious to know what tool you use to change the tool with your milling machine, as I've never seen a tool like this.

What machine is this please?

Нахера фрезы жëг?

estal software ?

Klasse ich kenne das auch, mir ist das auch schon passiert 😂

А где такое дерево вы взяли ?? Кто вам его поставляет ?

Dommage un tel travail pour y mettre 50 visses :)

Though, snowflakes have 6 points not 8

Los vídeos en los que se trabaja la madera, ya sea a mano o a máquina, son jodidamente satisfactorios y relajantes...

Belleza de máquina

Wait wtf?

Qual é a espessura desta madeira?

А мы на покрышках от грузовиков катались. Устраивались внутри всем телом по окружности, бывало и с горки по приколу пускали. Сейчас не смогу уже боюсь.

Sweet gift! 💕

The device did all the work, now the device itself is advertised😂😂😂

Why not directly put the pad on the adapted collet and set the just right amount of pressure with Z height? If the job is just to remove the flattening marks the slab should already by "flat” ..??

I always wondered why solid shank cnc router tools have that color, is it a coating or a result of heat treatment?

If I ever get a router table, this would be it because it’s safe. Well safer than the others I have seen. I think I’m traumatized by all these videos of pieces flying into the operators and all I can think of is it happening to one of my sons….. but good joining by the way!

What do you think of how this turned out? Check out the plans for this project - www.toolstoday.com/small-wooden-jewelry-box-cnc-plans.html Cutting out a jewelry box and engraving the bottom of a jewelry box on the Stepcraft M.1000 CNC machine using the Amana Tool 46202-K 1/4" downcut bit and 45771-K 30 degree Spektra™ coated engraving bit all linked below. - - - - - - - 46202-K RPM: 18,000 Feed Rate: 100ipm Plunge Rate: 50ipm Depth per pass: .25" - - - - - - - 45771-K RPM: 18,000 Feed Rate: 48ipm Plunge Rate: 24ipm Depth per pass: .02" #short #shorts Tools Used: Vectric Software for CNC www.toolstoday.com/everything-cnc/cnc-software.html STEPCRAFT M.1000 36 x 48” CNC Machine www.toolstoday.com/stepcraft-m-1000-cnc-system.html Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit www.toolstoday.com/v-13779-46202-k-bit.html Amana Tool 45771-K Solid Carbide Spektra Extreme Tool Life Coated 30 Degree Engraving 0.005 Tip Width x 1/4 SHK x 2-1/4 Inch Long Signmaking Router Bit www.toolstoday.com/v-14233-45771-k.html

For that price, why don't I just buy an actual drill press instead of this overpriced gizmo? I could buy a decent quality plrtable minipress for the price of this jig no joke. Nice as it is a serious wood worker will have better options than on this nifty toy.

I would have used the XK-RED-27.

идеально!!

Woodpeckers= the Dyson of woodworking

Зачем,слишком много безполезных движений.

Super 👌😎

ヒヤリハットが苦手だからすっごい安心感ある

Japanese level

that looks extremely flimsy

wow that's a bunch of mass on a tiny piece of wood, stressing me out brother