Mirka its over price. we got 4 mirka in our shop they all quit after a year after warranty expired. i bough 3 max xt at amazon for price of one of Mirka. it perform just as good as Mirka and its over a yaer now nothing broken yet
@kamil730722 сағат бұрын
Year? Mirka warranty is 2 year and you can add 1 year if you register the tool after buying
@adamvu11911 сағат бұрын
@@kamil7307 I’m not regretting or say bad thing about Mirka I got what I paid for. it don’t own me nothing. But to compare the two brand i bought 3 it will out last Mirka
@adamvu11910 сағат бұрын
@@kamil7307
@DEADLY6Z5 күн бұрын
Share links
@ishantkadaria54066 күн бұрын
I am just here after you left me a VM on my number you looking for old friend hopefully you find your friend though surfing around found your channel subscribing you liked the video
@area50juan6 күн бұрын
Thank you so much. Yeah I was deleting some old contacts but checking first. 😊
@saja61357 күн бұрын
Thank you for you video. I just purchased the dewalt 38l stainless steel shop vac and that very same adapter for my sander. The adapter fits the sand but the adapter does not fit the vac!! But your video explains a lot and what I need to do thanks again.
@area50juan7 күн бұрын
You're welcome.
@Cuby2k17 күн бұрын
What would you say that your skill level is?
@area50juan17 күн бұрын
If you look even at the titles of my other videos you’ll get a good idea. 😊
@rwyse119 күн бұрын
Great work my friend I've had the cornet herald lathe for 4 years now and it's brilliant cheers Ray happy woodturning
@area50juan19 күн бұрын
Thank you!!!
@MrPheast22 күн бұрын
$30 per pound ? That’s crazy prices
@area50juan22 күн бұрын
Yep. Welcome to Canada 😢
@spot923 күн бұрын
Damn. I wish I was close by
@fanelliscustoms23 күн бұрын
we are fortunate here and have the Amish where we buy most of our meat
@area50juan23 күн бұрын
Nice to have that available.
@youcantouchgrasstoo24 күн бұрын
I just got the maxxt...and I'm returning it. Just wasn't good.
@jinkazama901728 күн бұрын
Could maybe leave it in there for even half that amount of time and it would be dry enough, and save some electricity :D
@fernandoreichert643128 күн бұрын
Usou qual configuração pra gravação ficar assim escura?
@DreamWorksWoodShopАй бұрын
Greetings Juan! Good to see you back on the channel. If I wasn’t already subscriber, I would’ve subscribed again if it would let me.😊 Hope you’re doing well my friend! Beautiful home.. 😎
@woax.Ай бұрын
Is this the same issue, I uploaded a vid that is 1080p60 but when uploaded it’s only shows 720p and 1080p no 60fps
@gaston188Ай бұрын
Hola Juan Como va la mudanza a Argentina? Espero que estén bien. Como me puedo contactar con vos por privado?
weighing the bowl before and after (in grams) would be interesting.
@ryandubas4917Ай бұрын
What size wood did you use for the foundation?
@area50juanАй бұрын
6x6 pressure treated
@lenpiazza8493Ай бұрын
I plan to purchase a mini gorilla when my workshop is available. I cannot thank you enough for making this excellent video. I will watch it again when the time arrives.
@area50juanАй бұрын
You most welcome 👍
@GRF396Ай бұрын
Thanks
@gaston188Ай бұрын
😂😂 el gato sabe!
@norm5785Ай бұрын
Thank you for sharing
@jondaviesАй бұрын
feel stupid for not knowing or thinking of doing this, great video. i got a SD,HD and 4k processing, I got stuck on the HD and 4k after I did this the HD processed straight away but had to wait a couple of minutes for the 4k to finish
@mikegeheren7508Ай бұрын
Best shop ever!!
@MH-tn3ppАй бұрын
Be strony, New Life waits gór KZbin.
@thefrogmagician9866Ай бұрын
Why move?
@area50juanАй бұрын
Trudeau
@cihangirhamsici77522 ай бұрын
😅
@jeremyhelias54502 ай бұрын
Somes issues with electric connections...
@lanbae322 ай бұрын
terima kasih untuk videonya, bermanfaat
@amerikadamotor2 ай бұрын
mine is waiting for more than 10 hours now , still didnt start processing
@garyconway4392 ай бұрын
Thanks for the video Juan - I am also a long time woodworker just getting into turning. A friend gave me a Shop Smith clone with a slowest speed of 850, which is actually 980RPM, and I tried turning an 8’ round x8” long oak log, and ouch it was like being beaten up. I did not understand about the approach angle, riding the bevel, etc. but also I think the speed was too high. So I will try turning some smaller blanks because of the higher speed. As someone said the goal in the beginning is simply to make lots of shavings.
@area50juan2 ай бұрын
Thanks Gary, I suggest you look up a few demo videos by Stuart Batty he’s the 40-40 master. Regarding speed once you get the hang of that gouge it should be fine. I usually turn something 8 inches at 1000 unless I’m getting shake at the beginning but once stable I go to around 1200, on 10 to 12 inches I do minimum 700 max 1100. But you need to be confident you got a good hold on your piece. I also find the 40-40 body position to almost always places you out of the line of fire. Do take your time with shallow cuts though, no rush, every pass is one more practice pass under your belt 😊
@farhanverified12 ай бұрын
Wht is sd means
@area50juan2 ай бұрын
Standard definition, less than HD.
@farhanverified12 ай бұрын
@@area50juan means 1080p fps is hd its mean that and wht is 1440p fps whts that means it's hd or sd
@area50juan2 ай бұрын
FPS is frames per second SD is 480P (P is progressive) 720P is considered HD 1080P is true HD Then there is 1440, 2K and 4K
@farhanverified12 ай бұрын
Converted to sd means wht resolution i get
@brianlovins15662 ай бұрын
All the best my friend!!!!
@area50juan2 ай бұрын
Thanks Brian
@lindboknifeandtool2 ай бұрын
Exactly what I was wondering. Is this an 8” or 10” wheel? Sorry for imperial units
@area50juan2 ай бұрын
10
@dickloek53132 ай бұрын
Juan and Kim, I told you before with both your talents I have absolutely no doubt you will be successful in whatever you are persuing in Argentina. Your place in Peterborough looks so very cozy, you have done so much to make it a beautiful place to live garden and do your woodturning. Enough said, I know there is nobody in the wide world that could change your mind.Godspeed !!!
@maxa32212 ай бұрын
Dude you're the man. Great video. No hacky diy attachment.
@daveschroedersworkshop44792 ай бұрын
Gorgeous wood. Good turn. Sad to see you leave us!
@area50juan2 ай бұрын
Thank Youuuu!
@dkat200002 ай бұрын
Beautiful
@loranwfry-zu9pu2 ай бұрын
Very nice work, Juan. Safe travels and blessings to you guys.
@area50juan2 ай бұрын
Thank You.🙏
@siph2o2 ай бұрын
Wherever you end up, I'm sure you'll be back on your feet in no time. Safe travels!!
@area50juan2 ай бұрын
🙏🙏
@JohnFerraro2 ай бұрын
It came out great, Juan. Awesome job. Thanks for the shout out, and I’m glad you used it. 👍 Is the smell overpowering after a while or what? 😂 Again, safe travels to you both. Best of luck with everything, and hope to see you around soon.
@area50juan2 ай бұрын
Thank you. 🙏
@norm57852 ай бұрын
I am so excited for you in your move and new adventures. I am sure they have different woods available also. Maybe there will be some exiting market availability also. Nice bowl. Thank you for sharing. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia.
@area50juan2 ай бұрын
God bless you my digital friend.🙏🙏🙏
@Iamjaywayy3 ай бұрын
Wow it actually worked! Thank you !
@bestyonko3 ай бұрын
Did you re upload?
@Iamjaywayy3 ай бұрын
@@bestyonko no , just added some words
@batincavusoglu63373 ай бұрын
DUDE WHAT THE F ARE U SAYINGGGGG. JUST EXPLAINNNNNNNNNNNNNNNNNN WHAT TO DO
@area50juan3 ай бұрын
Sorry didn't hear you, speak louder.
@TecTimmy3 ай бұрын
This didn't work for me sadly. Do you know if pulling the video and then uploading it later will impact views?
@area50juan3 ай бұрын
Not 100% sure but i would say yes because it happened to me on a different channel (openhouse24) where the client asked for a re-edit a re-upload and got almost no views despite 400K subscribers.
@TecTimmy3 ай бұрын
@@area50juan thank you very much this has been my experience also
@BBK4073 ай бұрын
where did to get the morse taper adapter?
@area50juan3 ай бұрын
Amazon
@dickloek53133 ай бұрын
OK Enough BS I like to buy that cup you are making as a souvenir before you return to the homeland. I need something to remember you by.😂 You know where I live, bring Kim.
@area50juan3 ай бұрын
LOL, We will come visit you.
@dkat200003 ай бұрын
That is an amazing life story, thank you for sharing it with us.
@glennmcleod99303 ай бұрын
Fascinating story, well told. Your tenacity for making the most out of your life will certainly propel you into a new chapter of adventures. Thanks for stopping by my neighborhood on your life journey.