People always have opinions and biased experiences that vary immensely!😱🤣 This is a co polymer made from nylon and fluorocarbon. I’ve heard wildly different things about it. I only have it in 16 # and I’ve yet to try it. The reason I bought it years ago is because it’s allegedly more manageable than pure fluorocarbon on a spinning reel but it’s almost invisible like pure fluorocarbon. I need to finally spool it up and try it. I’m gonna use line conditioner just in case. I use to think line conditioner was snake oil but it works great.

Damn and hour and a half video to put a nice sharp sdge on a budhet knife is a bit overkill. Id put my knife up against yours in any sharpness test and i soent maybe 20-30mins from start to finish. Amd i didnt loosen or take off any acrew, its possible to qork the knife open and closed just enough to pull it and snap it ooen. Ill stick to my Smiths diamond sharpening stone over this set uo and day.

When I got mine it was semi sharp..with a quick swipes down the course side and about 6 or 7 on the fine and this knife is razor sharp. I have no doubt it'll cut through bone just fine

I had the same issue, I changed the angle on the edge now it’s hair popping sharp

Just bought this and then watched your video. I kind of chuckled and then put in on my reel. Casted and immediately bird nested my spool. Cleaned it up and same thing happened again. Just returned it to the store and got some different line. The line is much stiffer then any other line and taking it from the large diameter spool and putting it on a much smaller reel doesn’t work out well, it just wants to rebound to its spool size

That is awesome!!!

I love all Vanquest, Top quality for Me!!

Tactical lollypop holders

Put spool in warm water for 10 minutes, reel in slowly while lightly pinching the line. None of these problems will occur if you do it right. If you change the method every 5 cranks, like this video shows, you will create more line twist than any single method would on its own. This video displays the worst spooling possible while blaming the line for user error.

Springs are same length, just less coils and smaller ring gauge than the 7rd colt mag.

I have this issue with a spyderco sage 1... did you ever get this knife to a point you were satisfied or did you ultimately have to send it in?

That’s incredible

I really appreciate your video explaining your thoughts on these mags, I ended up getting a Vickers, and 2 500 c-hd's for my 1911. Thank you for your help 👊☠️👊

Boring!!!!!

Maybe I missed it. Which size is yours? They come in three different sizes.

mine was like this when I got it, wouldn't flip open properly. spent about 10 minutes breaking it in and now it is smooth as butter- the action is stronger than my leek.

Dielectric grease will cure that lock stick

Yeppp, just got a magnacut dividend and it is doing the same thing and not only that but the edge was horrendous like 45⁰ per side with a nasty bur then when i sharpened it on diamond plates it felt as soft as pencil lead

If all fails, switch to braid and mono leader.

Throw it in a tub or bucket of water and use a wet towel to pinch the line to keep it lubricated and reduce twist while reeling in. The spool will spin and untwist on it's own in the water. It's not perfect but you can't get a near perfect job without proper tools. At the end of the day, it still catches fishes. An old time trick if you're on a boat, at a bridge or dam is too release all your line into the water current without lures attached and reeling it back in to get rid of all the twist if you don't want to buy any spooling tools. It's free. You should still pinch the line as you spool it in to reduce twist. They have spooling tools such as from piscifun that will untwist the line on its own which sells thousands of units of Amazon. Otherwise pinching and the old bathtub or bucket of water is your best friend to let it free spin. Just don't let the OCD get the best out of you, go out and fish.

Thank you for the lesson and insight. But why all the deep breaths and long sighs? It’s almost like watching a soap opera or something…

Slava Ukraini 💙💛

That flush magazine is not an 8 round magazine. based on number of holes on the side you can see its a 7 round magazine. (The other one is a 6 rounder).

Anymore, I use ETMs exclusively, with the exception of my mil-spec style 1911s. I have a bunch of old 7-round blued Colt mags for those. The newer stile mags just look out of place there. As to the Glock vs. 1911 debate, I own numerous models in both and it's like Coca-Cola vs. Nike. They're two different things and both serve well in their respective capacities.

Can send in any 1911 mag and get Wilson's for $10 each.

Its amazing how you where able to do such a technical and hard repair that only specially trained leatherman technicians are able to do. What a joke! I literally just had this same problem calling leatherman. Honestly puts a bad taste in my mouth. I mean just send me the spring and I'll pay for it. Black list me from future warranty work. I dont care. I use my tool almost everyday and don't want it gone for 2 weeks. Its just sad and shame on leatherman for working like this.

I really started to watch, I wanted to subscribe however all of the little movie clips was simply too much of an annoyance. I believe that you could get way more subscribers if you cut out all of this nonsense and create content with substance. I am sure that someone will think it’s cute and spend more than 5 minutes watching but If you want to be taken seriously I think that you should at least add a bit of substance between these lengthy random video clips that have nothing to do with the subject. I don’t want to be rude but if you actually want subscribers you should rethink how you approach your videos. If you can hook me in the first minute or 2 with something useful maybe you can add the occasional movie clip but this is overkill and I am sure many people would agree.

I ordered some thinking it was regular monofilament. As soon as I put it on I realized something was different because it was kinking when I was putting it through the rod eyes. We'll see how it fishes.

Booboo kit 😅

😂😂😂

You don't use the horizontal pocket for chest seals?

Love your short film out takes. It makes your reviews interesting.

I just did JB Weld cold, steel and fixed it that way didn’t want to deal with sending it off

Honestly, I just started using the stuff. Not sure what you are doing wrong, but this stuff is great. No line memory issues at all. No kinks, no twists no knots. Spool buy letting the feeder spool spin. Don’t lay the feeder spool flat. Running 8lb right now.

Never had an issue with the 8 round 47s, i just picked up 3 more 47DCs

You made a Tanto a drop point

Mad Katz Medium has become my go to. The ML is nice too but meh throwing 2+ ounces. Lots of flex on a 10'b fish. The MH is just too much for most of my fishing. I keep them for the big rivers pitching a few ounces in current. Whisker Seeker upgraded the cork handle. Almost got one. Should have.

I definitely would get 💯 use of the camp axe

Love super lube its cheap and last forever. Put it in all my washer pivot knives

I bought one of these with both bit sets, the bit extension and a case in mid December 2022. I've tried to use the scissors 3 times and since new, mine has had what is likely the same problem. The spring bar can be moved all over the place but never does it perform a spring function. In addition the scissors blades are much too far apart to actually cut anything. I bought a Swiss Army Evolution S54 so that I can carry functional scissors for anytime I need as much. I suppose it goes to show Leatherman's level of quality control that a defective from the moment of manufacture tool can leave their plant.

Love the red, white and blue.

I heard the stainless surge scissors cut better than the black one IDK if its the finish binding it up or what

Can't use oil with Medfords or the lock will stick. Better off with that super lube stuff if it's food safe👍

Would love to have seen a Meathunter Rod included!

It’s not as complicated as you make sharpen til burr flip sharpen to burr the touch it in.

Love this shit you had me cracking, and definitely not wrong we always want better

1911s that come with the standard base pad on the mag, can a flush fit mag work in same gun? Thank you.

I have same problem. Mailing from the other side of the world will cost me half the price or more of the Surge.

I have a knife like that but pick and I'm 17 they are really good

This is a fantastic walk through I have spent weeks trying to figure out the best setup for the canoe I have tried multiple options for fishing out of it but this video is the one that ties it all together. Great job on the canoe and I will definitely be copying your ideas.