4 ай бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@robertblacketer3715 Күн бұрын
You got a video on how to tune it
@michaelhasse2568 10 күн бұрын
They suck, at least the one I got. Lasted one month and runs like shit. Buy a real Weber and avoid headaches
@eddiearchuleta615 12 күн бұрын
Ethanol doesn’t destroy rubber age does gasoline is harsher on rubber than alcohol
@olallaeddy 16 күн бұрын
Just dont send them an email. No response. I had two FE cams for 428 and 390 and had to send them to Oregon Cam in Vancouver. The guy here never responded to me. I live in Tacoma area
@octagongarage3504 11 күн бұрын
I have had this problem in the past about getting a email back can be hit or miss i would give them a call at 1-800-562-5500 ask for john
@devroombagchus7460 16 күн бұрын
But those ugly US required bumpers!
@Undersiegeisfunny 18 күн бұрын
Thank You for the demonstration
@octagongarage3504 11 күн бұрын
thank you for the feedback i hope it helps out
@carlholm4264 21 күн бұрын
Thanks for posting the size needed for the job. It’s a simple thing but it does speed up the job having the right tools in hand from the start.
@octagongarage3504 20 күн бұрын
No problem 👍 thanks for the comment
@iseanuthin7785 22 күн бұрын
I believe this is a very similar process with a lot of struggling in the 1994-1999 celica also
@slippedknot2001 Ай бұрын
Thought it was cool to be able to run the original plate when I first heard about it but I'm going to build a 51 chevy to be a daily driver and I'm not gonna spend tens of thousands to have a mileage restriction
@Reloadeez 2 ай бұрын
Here's a tip on checking if the year of manufacture historic plate with 6 or less numbers/letters is available to register without waiting weeks for an email response from DOR. Go to the Missouri online personalized plate availability page. Select any vanity plate type, it doesn't matter, put in the plate numbers/letters you want to check. The system will run those numbers/letters against all currently registered plates in Missouri, and say if it's available or not available.
@GregBishop-m6c 2 ай бұрын
Hi there, I just came across your fuel tank video while shopping for a fuel pump and I might be having to down the road replace my tank on my 64 MGB. Thank you for the information.
@OwhyeeVdub 2 ай бұрын
What do you think of it? I have an IDF knock off and I think it's a good product
@Jeffrey-t8g 2 ай бұрын
In my area Marathon has Rec 90 alcohol free fuel, that's the only fuel I run in my mower, more power, less hassle. If you use rubber fuel hose rated for fuel injection, probably never have to replace again, but it costs more than reg. hose.
@lesobliteres 3 ай бұрын
Liqui moly gear oil gl4 for me
@lapplaudme2159 3 ай бұрын
I'll stick to the USA made ones! But cool video.
@TheBuyanmg 3 ай бұрын
Rob, any recent updates on using the camshaft and lifters?
@octagongarage3504 3 ай бұрын
not yet I'm going to be sending off the crankshaft soon to the machine shop for modification when i get that back and the pistons in then the block will go to the machine shop i will do a update when the crank is back
@calarndt 3 ай бұрын
turn around switch to the back camera and get your face out of the picture!!!! I rode in it here in Urbana IL a while ago. Beautiful plane, sure wish it would come back here again.
@andrew6274 3 ай бұрын
why to use half of the screen to the beard instead to show ford tri motor?
@Troy_Built 3 ай бұрын
I flew on it about 5 years ago. It reminded me of an old school bus on the inside.
@octagongarage3504 3 ай бұрын
Thanks for the comment. I suppose the inside does look like a school bus in a lot of ways.
@wrayjordan7188 3 ай бұрын
One of the coolest planes ever. Saw one flying at Sun and Fun decade’s ago. Never forget the sound of those radial motors. Thanks for sharing ❤
@octagongarage3504 3 ай бұрын
Thanks for the comment. It’s interesting to look at how technology had changed. Look at the right brothers 1903 then 26 years later people are flying around in a plane that looks like this.
@bradgotschall3259 3 ай бұрын
Took my daughter on that same plane for her first ever flight. My grandpa and mom flew on one at an air show in the 30’s in Ohio. So now we have 4 generations of my family who got a little ride on one. I’ve got several members of the next generation down who live near Sandusky so hopefully they’ll carry on the tradition 😊. I’ve liked the TriMotors since I first saw one as a kid, my favorite plane. It’s like flying in a tin shack only more awesomer😊
@octagongarage3504 3 ай бұрын
Thanks for the comment. It’s interesting to think about this plane is almost 100 years old and it still flying today.
@crabtrap 3 ай бұрын
If you saw how small the motor mount tubing was on these youd never Fly!! Lookedto be 1/2 inch steel tube!
@octagongarage3504 3 ай бұрын
95 years later and still has not broken no, I would fly on it again
@mrod7692 4 ай бұрын
Doesn't get more classic than that.
@jw789 4 ай бұрын
I want to get on that plane and fly to Venice to find clues to the location of the Holy Grail and rescue my father.
@PRH123 4 ай бұрын
Or you could fly over the himalayas with a blonde lounge singer and have the crew parachute out and leave you to deadstick the plane into the mountains. That would be really cool :)
@octagongarage3504 3 ай бұрын
I always liked that movie great point
@portnuefflyer 4 ай бұрын
My first ever flight was in the Tri Motor that used to (maybe still does, doubt it) fly out to the Cedar Point amusment Park. I was a kid so about the mid '60's. I guess I liked it so much, I started flying myself in '72, and am still going strong, 200 hours a year, 52 years later!
@PRH123 4 ай бұрын
That's awesome. 200 hours a year is a lot for an average PPL. What do you fly?
@portnuefflyer 3 ай бұрын
@@PRH123 RANS S-7S, with a fuel injected Rotax, that pulls like a very strong 0-200 but sips fuel like the A-65 in my T-Craft did, slow, but who cares?!
@crabtrap 3 ай бұрын
She still flys out of Port Clinton airport and over our farm in summer!
@Jimthechevywheelman 3 ай бұрын
I did not know that there was still one flying in that area! When I was a kid(I’m 66 now) , a flew on one with our Boy Scout, troop, camped on one of those islands. Tell me is it still a part of Island airlines? I think it was their mail run that we flew on! It was the only plane that I ever flew on that was smaller than a passenger jet… Pilot gave us a turn of sitting up in a copilot seat!!!What a thrill for a young kid.
@brettbull5238 4 ай бұрын
Just tells you what years of the Ford, rust..... Joking one of my favorite airplanes
@generalzod7959 4 ай бұрын
I've been on that thing cool machine!
@davidgerrard8661 6 ай бұрын
Did the mgc ring gear fit the mgb carrier?
@octagongarage3504 3 ай бұрын
Yes it is the same carrier that the Mgb has there are several different styles for the MGC but the MGC in 1969 with transmission that has overdrive is the same carrier as the Mgb
@wayneblake1161 7 ай бұрын
Tudor webasto
@octagongarage3504 7 ай бұрын
Thanks for the comment
@TRRILCS 7 ай бұрын
Victoria British had excellent catalogues and very good coverage. Not sure what Moss did to ruin all that. Why buy the company, only to downgrade it so badly to what limited inventory they advertise now :(
@jd-dg9gn 8 ай бұрын
I would silver solder the fitting to the tank, much stronger than just solder.
@octagongarage3504 8 ай бұрын
I was thinking of a bronze brazing it
@iandavidson8620 9 ай бұрын
Great informative video.I have been sending Henderson and Indian 4 cams to these guys for 15 years and never had a bad one.Thanks
@octagongarage3504 9 ай бұрын
Thanks for sharing
@blitzerrrrrrr 9 ай бұрын
Can your shop do that to four cylinder motorcycle crankshafts?
@octagongarage3504 9 ай бұрын
If you need crankshaft repair contact Marine Crankshaft marinecrankshaftink.com
@chrishale2939 10 ай бұрын
I need the 2.2 cavalier cam
@SaifulShafie-il5ym 10 ай бұрын
Hi ,, just askin' if u could reprofile my standrd cam shaft, which is now around 250⁰ cam duration,, I about to increase it around 265⁰,it it possible and how much it cost?
@octagongarage3504 10 ай бұрын
Yes i have a 270 cam from Delta cam and it runs grate give john a call at (800) 562-5500 or on the web at deltacam.com they can help you out on all of your questions
@donnasingleton6320 10 ай бұрын
Chinesuim is real. The parts are garbage. I wish I could convince my son who continually uses Chinese parts on my car even after I told him not to..😢
@gj91471 11 ай бұрын
I would be running Oil Extreme additive in your Engine Oil. Zinc is 1960's tech. Oil Extreme has Calcium Sulphonate...... That will ensure Your lobes stay on
@armyantlocsta Жыл бұрын
Good N4! I’m in MO & might do this next time I go visit my oldest son in Jeff City. I have a ‘98 Eldorado. Do U have any black & yellow/gold plates 4 that particular year I can buy??
@octagongarage3504 Жыл бұрын
I don’t sell License plate so I just did a video on year of manufacturer take a look at the description text below that I have the contact information of the gentleman that I got my plates from I hope that is helpful thanks
@MagnusMaximusinWales Жыл бұрын
What is the point in this video??!
@Wtfinc Жыл бұрын
Im sure it works great as long as everything is in spec
@octagongarage3504 Жыл бұрын
Thanks for the comment we will have to see i hope buy spring
@nathanldunn Жыл бұрын
May I call you? I have a 74 mg b too and am thinking of getting a prestige top but want to talk with you about difficulty of installing.
@jjefferyworboys8138 Жыл бұрын
Lovely car, one of last V8's produced, of 2591 in total. Webasto roofs were very popular in the UK at the time, fitted to many cars including Rolls Royce.
@octagongarage3504 Жыл бұрын
Thanks for the comment glad you enjoyed the video it is a very nice car I absolutely love custom green leather interior it really brings it all together nicely
@gregmooradian3711 Жыл бұрын
Great information Thanks! Mic works well.
@octagongarage3504 Жыл бұрын
Thanks for the comment i hope it helps
@salrivera7578 Жыл бұрын
He seems a real gd guy more to earth and simple mountains ways no other way plus he takes pride on his products and job gd old way guy
@octagongarage3504 Жыл бұрын
Thanks for the comment John is a grate guy that takes a lot of pride in what he dose
@johnwren3976 Жыл бұрын
Many miss this & it causes a lot of lost motion. They do come on new cylinders.
@octagongarage3504 Жыл бұрын
The new cylinders i looked at sad to use the old push rod that it was not included i ended up rebuilding the old one
@isaacgroves6092 Жыл бұрын
What a show! Great awards! So osom for your MGC to win. I loved Walt. He talked to me a bunch my first time at a club meeting. I distinctly remember him taking me out and letting me sit in his car, he let me start it and rev the engine. I cant wait to see the C in person when I come through in a couple weeks. Looking forward to it. I wana ride shotgun!
@octagongarage3504 Жыл бұрын
He will be missed what a grate guy
@americanpatriot2422 Жыл бұрын
Outstanding video and presentation
@octagongarage3504 Жыл бұрын
Glad you enjoyed it
@americanpatriot2422 Жыл бұрын
@@octagongarage3504 Congratulations on the trophy 🏆
@reedsilvesan2197 Жыл бұрын
My guess is the nut was used to test the alternator, then put back on after the pully was removed.
@octagongarage3504 Жыл бұрын
Very good point it’s very possible that that’s what happen
@isaacgroves6092 Жыл бұрын
tottaly rad! Sounds really great!
@octagongarage3504 Жыл бұрын
thanks
@isaacgroves6092 Жыл бұрын
Great audio Robert, I like the mic. I wonder if your beard blocks the sound? Its osomly big these days! :D
@octagongarage3504 Жыл бұрын
I think so!