Is it good for a allready coated carr

Just wish this was a bit larger but like a modern shammy leather great in the professional scene we’re no time to be washing loads of plush drying towels

They are good I say a modern chammy leather. It more suited to the professional market where I use them where u haven’t got time to dry many thick plush drying towels. I wish it was a bit bigger than it is and is not the most durable but works well

This was helpful-thanks so much! 🤩

would have been to compare it with the other half of the pain with wax on

Thats only half the bonnet what about full car bull shit

working with this drying towel is too tedious to dry the whole car after manual washing...best is a good turbo blower...

Is this super resin polish?

Is this an updated product from magma?

Hi great demo . What used to remove compound Glass cleaner or tar glue remover ? Cheers

Love this product amazing 🤩

Good stuff 😍

Can I use a wax on top of coat-It? Or do I have to wait for it wear off or remove it?

Is it best to use super resin first? Or is this product instead of?

What is the size of the male quick connect plug that sticks out of the foam cannon?

Really impressed with this product. Basically I got sick of bucket washing by hand and bought an AVA go55 pressure washer. It came with a foam gun so I used that with the Polar Blast. Lots of foam and I used just over half of the 600ml mix. The sun came out annoyingly so one side was drying too fast. Rinsed off a bit too soon but couldn’t really fault the results. Had my hand wash bucket ready as a follow up but hardly used it. Grabbed Autoglym rapid wax, applied a sparingly amount and buffed it to a good shine. 3 weeks later and everything still looks good and I’m looking forward to the next wash and clean with Autoglym❤

So it’s the pre wash, snow foam and then the shampoo/conditioner?

hi, i used the polar seal, but leave marks on my car, how to remove those marks?

where can we find the polish applicator sponge you used in this video?

Thought I was going to have to buy a new one, turns out this is exactly what was wrong with mine, thanks

Can i use the ultra black sponge designed for rinseless washesfrom the rag company

Use this before or after polar seal?

On the site it says that it is also suitable for matte paints.

Not cheap, BUT my goodness it does a wonderful job, I use the 3 stages and results are brilliant.

Why don't you remove the plastic engine cover to get acces to more engine parts?

Can you rinse off the foam with a regular hose or is a pressure washer required to remove the dirt underneath?

Thank you I will give it a go.

Has anyone go a solution my autoglym foam cannon only lets the water through not the soap.

Can this be used on ventilating seats? Or will it clog the circulating perforation holes?

After using this is the 3 step polar wash still required

Will this work with the nilfisk excellent 145?

Rinse from bottom up makes no sense at all. You should know better.

Could this be used on top of UHD wax for added protection?

Where do I buy the products ?

Quick question, my pressure washer has packed up and had to be sent back to the manufacturer for a service, my spare pressure washer doesn’t have an injector input or a foam lance which is quite frustrating when this products is a well liked customer option - what dilution would you recommend in a pump up foam bottle in the short term? Or should I use express wax temporarily until the pressure washer returns? Thank you!

Just used this at the weekend, brilliant, one question, where do I set my mix valve on the blaster, in our out

Looks impressive, what setting should the foamer be set at, thick foam or thinner? TIA

I think I'm not using it right😊

i stay in the car to make sure its working.

Pity about the 1:5 ratio

Is this ok for anodised wheels?

As an occassional use only, this stuff is great for car shows if you've had to travel a few miles to display your car! With the car fully detailed the day before, this serves me as a wet preparation prior to using a high gloss Quick Detailer (QD) on arrival at the showground to remove light dust and restore lustre. I take a bucket, a 10L container of water and a pre-measured dose of 'Quick Refresh' in the boot. My method is to slosh off and dry one panel at a time using the instadry cloth; rinsing and wringing out the solution for drying. Then when the car is clean, I can go over it again with a super glossy QD; reducing the risk of dragging dust on a dry towel as you can get with using QD on its own.

Just used this on my 30 year old FTO. The headlight was peeling and looked horrible, was worried I was going to ruin the headlight by doing this, now it's finished it looks great and it was so easy!!!!! I just need to put a coating on it to finish it off. Really pleased. Make sure you ware a mask when doing it!

Sooo... is this basically a rinsless wash?

Hello, is it safe to use bodywork shampoo conditioner, then super resin polish and finally the rapid ceramic spray in one wash?

So I could use this after Polar Blast, Polar Wash and just dry after applying the ceramic spray? Or should I dry after washing and then apply and dry again?

No need to use the Leather Balm after cleaning. Here are some of Autoglym's replies found in this comment section: -- "No, we do not recommend the use of Leather Care Balm on steering wheels. Although when used correctly Leather Care Balm will leave a non-slippery, greasy free finish, when used incorrectly it can lead to a slippery surface. so we do not want to advise people take the risk on such an important surface as a steering wheel where grip levels are of paramount importance." -- "Leather Cleaner alone won't cause the leather to dry out as it contains the necessary oils to keep it in good shape. We wouldn't recommend the Care Balm on steering wheels to avoid making it too slippery, similar to not using dressings on driver controls." -- "No, we do not advise using Leather Care Balm on any control surfaces such as steering wheels or gear sticks just to be on the safe side, as if the balm is over applied it can lead to slightly reduced grip." --"We do not recommend applying Leather Care Balm to the steering wheel, as if it is applied or used incorrectly it can cause an increase in slipperiness. This is not a desirable quality in a steering wheel, or any driving control." -- "No, we do not recommend the use of Balm on the steering wheel." -- "Great question. We would NOT recommend the use of Leather Care Balm on the steering wheel as there is the potential for a lack of friction. It is a very small chance, but you don;t want to play about with the grip on a steering wheel." -- "We don't recommend you dress the steering wheel or add any balms etc. Much safer to just clean it and leave the leather clean and dry."

How good is this at removing mould and algae

Could I use a APC in this? Got it rough with rust proofing my car each year, just the build up of the sticky oil substance and Polar Blast can't break it up. Also, Kinda sucks you guys are pulling out of canada, I had a feeling something was up when all your best products started to disappear off the shelf.

Can this be used on interior fittings such as trim and steering wheels ?