If so, I have been trying to figure this out forever.
@matthewholmes6428 Жыл бұрын
So it does fade on and off with the dome lights?
@ordinary_arkansan Жыл бұрын
Yes. It fades on and off when the doors open and on unlock. If I turn (all) the dome lights on, they will also turn on.
@matthewholmes6428 Жыл бұрын
@@ordinary_arkansan so it’s the white block closest to the driver seat and gray wire?
@ordinary_arkansan Жыл бұрын
@@matthewholmes6428 Yeah, whatever I say in the video (I don't remember off the top of my head).
@matthewholmes6428 Жыл бұрын
Thanks I just don’t want the lights on constantly
@elvismortimer1685 Жыл бұрын
Thank you for your time! Very informative!
@alberthornsby8486 Жыл бұрын
What lights are these?
@ordinary_arkansan Жыл бұрын
Theyre just cheap rock lights from O'Reilly's..
@alberthornsby8486 Жыл бұрын
@@ordinary_arkansan thx bro
@charleswatts1864 Жыл бұрын
Can you li k the exhaust kit?
@ordinary_arkansan Жыл бұрын
It's a custom exhaust I had a local shop do. There's no kit for it.
@markmanning5683 Жыл бұрын
Why would you leave wiring on the underneath of the truck? Maybe run the wires from inside the passenger compartment thru the grommets for each step area. Run all you wiring along in Wire channel inside the truck. Nothing to see that way.
@ordinary_arkansan Жыл бұрын
The way these lights are setup, there's no way there's enough wire to do that. Besides, if you get underneath my truck no wires are exposed or seen. I've ran them high and tight and inside conduit.
@markmanning5683 Жыл бұрын
Where did you find your Accent Lights and the Lights name? I appreciate it.
@ordinary_arkansan Жыл бұрын
They are just some cheap rock lights from Auto Zone. Honestly, I'm probably changing them out soon. Any led lights will work.
@Joshua3131cc Жыл бұрын
Do the lights come on when you hit the lock and/or the unlock button on the key?
@ordinary_arkansan Жыл бұрын
They come on with the unlock and fade off with lock.
@mfamercankafg3392 Жыл бұрын
Changed my oil in all my vehicles 4 wheeler and tractor , mowers Harley since I was 15 years old .. 45 years now .. I know dealer drained oil in car never put oil back in car, person drove away blew engine up ..
@Apolloneek Жыл бұрын
I just can’t believe the Camaro 6.2 takes 10 quarts
@bobbybaxley Жыл бұрын
I have the 21 Sierra 1500 at4 6.2 with 6 inch lift and 35s and surprisingly I get around 18 mph does a little better on longer trips.
@shondunn Жыл бұрын
Hey I need some help I have a 2022 Gmc 1500 Denali. Brought some Led lights to add to my running board. I tied them into the door sill lights. Every time the lights come on they flicker and then come on. When they go off the flicker then off. What can I do to get full power to the running board lights. I know the dome lights has a dimmer on them. Thanks
@ordinary_arkansan Жыл бұрын
Did you go through the BCM like I did? Mine will sometimes flicker if my truck is off, but other than that they never flicker. What kind of LED lights are they? You may need to get some that don't require as much power, maybe?
@tailai168 Жыл бұрын
Hi : I Bought a running boat For My 2019 Toyota Rav4 blue wire I connect to Door light (domes Light ) White wire I connect to fuel Box running signal Red wire I connect to Turn signal Black wire I connect to Ground But only work for turns single When I opened the door They don't have light come out Can you tell me what's wrong Thanks
@ordinary_arkansan Жыл бұрын
Hey, I'm sorry, I can't really help with this. I'm not familiar with the Toyotas.
@jakemansavage9505 Жыл бұрын
Does anybody ever check the REAL milage of these trucks? Yes, you have to do some math, sorry but these computers in the vehicles are not accurate on their milage.
@ordinary_arkansan Жыл бұрын
Yeah, I did. I mentioned it in another video. I was surprised it was only like .2 off (can't remember exactly).
@atlant25662 жыл бұрын
i just got myself 6.2 ESV and i hate how it switches from V8 to V4 i dont want to save gas if i wanted to i would never buy a 6.2L. Do you like the set up? also do you need to reprogram again if you take it off and put it back on for example to go to dealer service. Thanks bud
@ordinary_arkansan2 жыл бұрын
Hey, yeah I really love this setup (I'm st 30,000 miles now). They didn't have handheld tuners when I bought this so it was the only option. I also had the DFM and that was the main reason why I got it. I'm pretty sure I'd you take it off it automatically goes back to stock and then when you put it back on you have to reprogram it. I haven't had to take it off yet.
@thorpower10152 жыл бұрын
Ive had it on my 6.2 trailboss and wow luv the truck powertrain so much more better than my last two f150 5.0 sooo much more better.
@joshtaylor14162 жыл бұрын
Just hand tight the oil filter. Nothing else
@ordinary_arkansan2 жыл бұрын
Some ppl are cool with that. I like to give a little turn from the oil filter wrench (that doesn't hurt anything). Either way is fine, in my humble opinion.
@ARdave3112 жыл бұрын
this was great man, i just did a true dual cat back on my 06 2500hd 6.0 with 6" tips and its just brutaly loud, the clap is sweet but man its just obnoxious, i dont want to do a muffler cause it will be to quiet the x pipe seems to take just enough edge off the true dual and i plan to take mine to get the X pipe soon to tame the obnoxiousness
@ordinary_arkansan2 жыл бұрын
Yeah, I don't like clapping and the X for sure smooths it all out.
@605LIFE2 жыл бұрын
Those LEDs are rad!!
@richardlord77752 жыл бұрын
the other side of the foam seal isn't sticky.
@ordinary_arkansan2 жыл бұрын
You're right. That was my mistake.
@jerryruiz262 жыл бұрын
Was this filmed with a potato?
@ordinary_arkansan2 жыл бұрын
Get off my channel!! 😆
@605LIFE2 жыл бұрын
Haha!!
@KliqDon19832 жыл бұрын
run premium makes a huge difference MPG
@ordinary_arkansan2 жыл бұрын
Yep. 93 is all I run.
@andrewhassell89822 жыл бұрын
instructions unclear, I now have jelly all over my ceiling fan . . . .
@ordinary_arkansan2 жыл бұрын
😆 get to work!
@andrewhassell89822 жыл бұрын
7. Fasten the step bar to each bracket using one (1) RTSPN175 Bolt/Nut Plate, one (1) Plastic Push Nut, one (1) M8 Hex Head Nut, two (2) M8 Lock Washers, two (2) M8 Flat Washers and one (1) M8 x 30MM Hex Head Bolt. Your welcome 😂
@andrewhassell89822 жыл бұрын
Wrong! Lock washer should be on first then flat washer . . . .