3 ай бұрын
11 ай бұрын
2 жыл бұрын
3 жыл бұрын
Пікірлер
@MoTheFcker 2 күн бұрын
does it have bolt stop?
@PTSSyndicate Күн бұрын
No
@MoTheFcker Күн бұрын
@@PTSSyndicate Please make a version with Boltstop. I know 3 people that will buy it stright ahead, including me :) I already have 3 KWA ERGs and love them all. Boltstop is one of the best features besides recoil you came up with!
@alexanderw5974 10 күн бұрын
Please make a radian model 1 that’s based on the Mws system
@1lovesvideos 26 күн бұрын
I'm not much when it comes to Gucci looking glocks, but this actually looks nice
@tk2097 26 күн бұрын
Can i use any lubricant inside as the spring tension isn't consistent anymore and they seem to surge and stall?
@GoodMods 20 күн бұрын
I have this problem as well... I'm going to clean them first and try to load them with fresh BBS first. I added silicone spray but only helped for 2 magazines...
@NickxGaming Ай бұрын
Is the baseplate in some (new) EPM1 mags glued? There is no way I can move the baseplate in my two long EPM1 mags. (and yeah I press the button). In my short EPM1-S Mags its no problem and the baseplate moves without pressing the button for some milimeters. But in the long EPM1 nothin happens. The baseplate is fixed like with glue...
@juancarloslomelisaldan6614 Ай бұрын
Can it use co2 magazines?
@federicofranceschini4218 Ай бұрын
Info.....
@FellFresse0815 2 ай бұрын
Does anyone know what´s the threadsize for the screw that holds the outer shell in place?
@alexwoods8956 2 ай бұрын
Update on this?
@chrisedwards8439 2 ай бұрын
Would this be able to support a dead air sandman if it was within 2-3 inches tucked into the handguard?
@PTSSyndicate 2 ай бұрын
The rail system is compatible with the PTS Dead Air Sandman suppressor.
@jonnywinter8818 3 ай бұрын
Man I love this M4. It was my 1st Airsoft Rifle; still stock and running like a dream! would love to find a disassembly video of it lol
@scottaspden7235 3 ай бұрын
Forgot the o ring in the nozzle and which way the cone washer sits.
@PTSSyndicate 2 ай бұрын
PTS version Odin has not O ring in the nozzle.
@scottaspden7235 2 ай бұрын
@@PTSSyndicatemine is a Odin EMG Collaboration edition.
@KhadskinYTDPH 3 ай бұрын
where is the enemy and where is the zev glock pts z09 until now there is no full review thats why we cant buy this one because there is no complete details
@In00by0u 3 ай бұрын
Ar-9 pts Metalbody? ❤
@WinteR5 3 ай бұрын
Hey @PTSSyndicate, 1. internals as you mentioned earlier, hammer, hop up is compatible with TM G17 Gen 4, what about rest? 2. who made this pistol, Army Armament, KWA, VFC someone else? Thank you in advance :)
@KhadskinYTDPH 3 ай бұрын
what is hammer system used ??? from vfc or tokyo marui ? and what about the hammer sets ???? is steel?
@PTSSyndicate 3 ай бұрын
1. It is compatible with the TM-G17 (Gen 4) hammer. 2. The original is already made of steel.
@KhadskinYTDPH 3 ай бұрын
@@PTSSyndicate wow can make review please
@KhadskinYTDPH 3 ай бұрын
@@PTSSyndicate i want buy this one so i need more information about this toy
@gabriele4811 3 ай бұрын
Guys what about making a replica of a Fast type helmet? You did an awesome job with the mtek flux replica and i would love to see something with the Fast/Maritime style :)
@Patrick_doubleu 3 ай бұрын
Does holosun red dots fits ? 🔫🇺🇸😍
@PTSSyndicate 3 ай бұрын
if your holosun RMR Size can use.
@gregoryfranks7347 3 ай бұрын
any possibility of a g19 compact style gbbr. this looks amazing and obviously cutting edge. that's so great to see such innovation. I salute you all. please consider a compact version in the very very near future. cheers
@KIM-jg4ck 3 ай бұрын
very nice!! give me the oz9 compact model plz
@gregoryfranks7347 3 ай бұрын
you took the words right out of my mouth!!!
@kalonng1629 3 ай бұрын
想問問用到tti 出比馬記g17 gen4用既hop座嗎？
@PTSSTEELSHOP 3 ай бұрын
TTI 出個款不能直接安裝，需要自行修改鎖凹陷位於，需要修改多少就自行參觀原裝Hop-up 座/TM G17 Gen4 Hop-up 座。
@scorpionleader424 3 ай бұрын
The scews on the hop up unit are too soft of metal. Please fix the issue thanx
@scorpionleader424 3 ай бұрын
Some of screws on the zev 1911 hop up unite are soft
@GaryOuellette-b4d 4 ай бұрын
Gonzalez Scott Garcia Mary Young Deborah
@Swiat34 4 ай бұрын
I’m having a problem fitting this on my buffer tube. The tube diameter is fine but the bottom of the tube’s adjustment block doesn’t fit as if it protrudes too far or the stock’s wasn’t made deep enough.
@jaspertubig9859 4 ай бұрын
100% tm compatible parts?
@ZigzwagProps 4 ай бұрын
I really wish that PTS would come back around and release another series of Masada rifles. They were some of the best of their day and then they just up and vanished. a Masada released under the PTS line would be awesome! especially with all the modern fixings of what PTS has been offering lately!
@douglassoal6196 5 ай бұрын
Very nice, pity no one in the U.K. stocks it apart from one shop, who sold the 2 they had and have no idea if or when they will get more.
@GRIMTHEBERSERKER 6 ай бұрын
Beautiful. 🔥🔥🔥
@Fokkkker 6 ай бұрын
Wtf is this for?
@gabrieliuspiecaitis7546 6 ай бұрын
I think the us version is sealed. Cant open the top
@LoneWolfStudios117 7 ай бұрын
So My friend won one of these at a KWA raffle at a black hawk down event at freedom. We have been having issues with it, everything works on it except we can’t get it to attach to the flash hider. In the video it easily turns when pushed on completely, allowing you to tighten it. When we slide the suppressor over the flash hider we can’t turn it to attach it. It will not lock into place making it impossible to tighten it. Is there any way to fix this?
@daviduk23 7 ай бұрын
Had the same issue, managed to get it on somehow but it now wont come off haha, the tighten mechanism I feel failed a Quality control check with these. Looks like it slides on and off on these videos but not the case, now stuck with a faulty one.
@LoneWolfStudios117 7 ай бұрын
@@daviduk23 that sucks, sorry about that man. If I can’t get them to do anything about it I might have to take a Dremel tool to the problem part to fix it… if I have to resort to that I will very disappointed because of the price of this product.
@daviduk23 7 ай бұрын
After much struggle I managed to get it on off but it takes real effort and wiggle compared to this video of it simple gliding on and locking on. Very much a issue with quality of build and checks sadly. @@LoneWolfStudios117
@PTSSyndicate 7 ай бұрын
About technical issue or purchase replacement parts, please send your inquiry to our tech support email ([email protected]) for support.
@LoneWolfStudios117 7 ай бұрын
@@PTSSyndicate I talked to one of your representatives at an event I attended. They said to reach out through the email as well. Thank you for reaching out and sending the email!
@gregoryfranks7347 7 ай бұрын
that tickle my pickle so f-ing bad!!!! can you get this without the flashhider. my emg de noveske came with the keymo 3 prong so i didnt know if you can get a different keymo muzzle style. also will a acetech brighter c fit in here and is it designed for it or a tracer to sit inside without sliding around?? thanks so much for any info you can provide. my eps-c looks vicious on y black n4 . i prefer it over the magpul sl. keep up the truly top notch products i use a shit ton of them. cheers
@daviduk23 7 ай бұрын
The tracer will fit inside I can confirm.
@jordang2120 8 ай бұрын
What is the difference between the us version and the non us version
@Apple43YT 9 ай бұрын
Anyone know how to disassemble one of these?
@janzigii 9 ай бұрын
Im facing same problem, if u find tutorial let me know.
@janzigii 9 ай бұрын
Well if u are facing same problem as me that the thingy inside doesnt retract enough and fit your tube: kzbin.info/www/bejne/ZnaQZp5rj8-Gbck
@lermaanthony6251 9 ай бұрын
is it true that you colaborated to ARMY ARMAMENT for that pistol,??
@edmundarcinas3573 9 ай бұрын
Does it come in dessert tan color
@stevendepauw3742 10 ай бұрын
Recently bought this for an upgrade in battery. Because the newer and more powerful battery didnt fit my buffer tube anymore. And its a solid stock with lots of space! :D
@Captainelduke 10 ай бұрын
What holster fits this model of GBB?
@valiantthor5238 10 ай бұрын
When will you Release your Dea Air Sandmann Suppressor Line ? Still nothing over a Year ? Have you skipped it?
@Patrick_doubleu 10 ай бұрын
🔫🇺🇸😍
@starkie14749 11 ай бұрын
How do I put on the threaded barrel?
@mauromosczynski5325 11 ай бұрын
Finally we'll have mags for Evo with reasonable prices.
@bmxgeneral 11 ай бұрын
Fu*king finally!! 🎉😂
@SLMn1n74 11 ай бұрын
Awesome!!! This is something i'm waiting for!!!
@bangerairsoft4086 11 ай бұрын
Finally, a real honey badger so I can stop making clones!
@CrazyMautty 11 ай бұрын
We got an Evo Scorpion mag before an MP5 mag. #butwhy
@TheArmouryHD0 Жыл бұрын
When
@comico8863 Жыл бұрын
Not a single word about the hop up system, which is one of the few things that matters 🤦
@KhadskinYTDPH 3 ай бұрын
yes your right about hopup system they dont told
@PTSSyndicate 3 ай бұрын
Thank you for the reminder! The hop-up system for the OZ9 is compatible with the TM G17 (Gen 4) system.
@WinterGhostSD Жыл бұрын
❤❤❤❤❤❤