Lol maybe they like it. I’ve never had it fail. You can mix dish soap with it to make it work a bit better but you have to remember to wipe up the soap.

@@NICKELGHANDI yeah I've tried putting dish soap in now and went back to slray them for like the 6th time and still nothing

@@NICKELGHANDI but then again they are actively trying to fight me in my bathroom and flying around so maybe i just don't get enough on them

You would have to look at the schematic for your specific pump. It’s been too long ago to remember and I don’t have the truck anymore lol.

It will do it. You would definitely need to break in the motor first and get through a few oil changes. You would also need to go to the 17t sprocket and possibly a smaller rear sprocket. Mine is at about 9500 rpm at 65mph, 10k at 70mph and pushing 11k at 80mph. I wouldn’t want to hold it there for too long.

@@NICKELGHANDI I wonder if the 212 would be safer on the motor itself to do it then.

It will get you more power but the gearing is really the limiting factor here.

That’s a good idea.

Here you go! bullockperformance.myshopify.com/products/190-212-exhaust-with-brocks-cam?_pos=4&_sid=845285639&_ss=r

It is not a bad idea and this motor has the connections for one but I don’t use one. If I had to ride in stop and go traffic I would probably use one. I’ve never had any issues in over 1000 miles.

There aren’t updated links unfortunately.

@@NICKELGHANDI dang. If anyone has the files still, it'd be fun to play around with. All the xda hd2 links appear to be dead as well.

I do still have the stock engine. They’re really cheap on Amazon though. By the time you pay for me to ship it to you, you could probably buy a new one. Here is one: amzn.to/4fzdI8d

@@NICKELGHANDI yea iv looked at a bunch of them on Amazon and eBay and you are exactly right especially if I got one that is kick start but I want the exact one like iv got now and iv found those but Amazon is currently unavailable and it's over 400 bucks with shipping... what would you want for yours with shipping and all

@@NICKELGHANDI thanks for responding also..

If you want it, you can just have it for the cost to ship it to you. Let me find out what that will be and I’ll let you know.

@@NICKELGHANDI ok cool thanks so much brother

You can but push notifications don’t always work perfectly. Signal works better than WhatsApp for push.

@@NICKELGHANDI Do you know about Bible apps, Everand, Audible, if these would work?

@@NICKELGHANDI Also, if using the GCam, would Google be able to track at all?

What doesn’t work?

It is somewhat more safe than on Android. Some information is shared with Google if you opt to use their services which is why it is disabled by default on GrapheneOS. You cannot entirely avoid the cloud traffic if you use the Google camera app but it is mitigated to an extent.

No. You pretty much have to have the PC or another device capable of routing act as the bridge.

It won't let my ps5 connect to the internet

I do still use GrapheneOS. There are a few different apps that I like. I will make an updated list.

Both. I went with a ZS-190 5 speed. I have a video covering the swap here: kzbin.info/www/bejne/Y4Sknn95ZbSFrdksi=3nw8qz2AuNJHCOFv

Not likely lol. The video only shows how the stuff works to dissolve what clogs most drains.

I use a GoPro Hero 9 for the camera and an old Samsung USB C headset for the audio. I know I was overmodulating on the Mic and probably need a new setup. I may try adding some fabric or cotton over the Mic first to see if that deadens the wind and stops the voice pop.

Right here! amzn.to/3xKnWBk

I’m glad you liked it!

It’s not even close to Honda quality. I’ve replaced a lot of parts to get it reliable enough to ride regularly. I did all of that in the first 500 miles though and I am almost to 2000 now on it. They can be almost as good as a Honda but you trade the money for the Honda for sweat on the clone every step of the way.

@@NICKELGHANDI what parts are they?

@Jugg215 some of them are in the pinned comment but I also replaced the Cush drive bushings, wheel bearings, rear brake line, and added a speedometer correcting device. All of that plus the ZS190 motor. The frames on these newer ones seem to be pretty solid but it’s the little wear parts that will fail on you.

Check out a company called lifan. They make some awesome bikes. Ive owned multiple hondas and currently own 4 bikes and my lifan kpx 250 is by far my favorite at the moment. Ive even jumped it quite alot and the only two bolts that fell out are ashamedly ones that i put in lmao. Its been just as smooth as my hondas which isnt surprising because they used to be a honda contracted factory. Even comes with a two year warranty 10k mile warranty. Advertised 75 top speed but i did 78 down hill with my fat 210lbs on it and a strong wind going against me so im thoroughly impressed.

@@inhumanfilth681I have a Lifan kpr 200 that I really enjoy. It’s smooth and comfortable and will do 70mph without blowing up.

I’m glad this video is still helping people!

@@NICKELGHANDI idk why it disconects every 5 minutes :( do u know how to fix it?

3” but it isn’t actually attached lol. The video was meant as a joke.

@@NICKELGHANDI so the inlet diameter is 3”

No. The outlet.

It didn’t. It can but it usually won’t as long as you wash it off quickly and thoroughly.

It’s a sticker but it has clear coat over it. It would be difficult to remove. My advice is embrace the cheapness of it lol.

Only one way to find out. 😂

It isn’t even attached to the exhaust and the exhaust is stock.