As I have said to everyone that does not like the music. press stop. My garage, I always have the music on. I do not make any more help videos because of this. This not a commercial video. I do not collect anything from any videos except annoying comments from people like you We also have an 2008 700 which I have overhauled pretty much all of it but have not shared.

@RhinoRider2006 My apologies for annoying you! I just thought it would have been a great video, and I could have learned something if I could have heard what you were saying over the concert.😊

Thank you for watching! I was riding in some deep snow, then the machine would not move forward very well. My buddy had to tow me out and back to the road. I could drive on the road with a lot of high revs. had to winch onto the trailer. Figured the belt. went home got a new belt, took it out onto the street. Still no performance. did some checking and found it was the wet clutch ( I was told that). Ordered the parts on line and did the work. never did it before. machine is still going strong.

Thank you for watching. I do have a video posted of just moose.

Thank you for watching. I do not bait the cameras as research I have done shows that the critters then depend on that location for food source. I prefer to see the normal passage of the animals. some times A camera will go 2 weeks with no action, then I will have 60 videos of different animals.

Thank you for watching, A recent conversation with a conservation Officer while in the forest I was asked for my channel address so they could see whats out there. There is a great deal of wildlife in our forest, way more than I could have imagined.

As I have said to everyone that does not like the music. press stop. My garage, I always have the music on. I do not make any more help videos because of this. We also have an 2008 700 which I have overhauled pretty much all of it but have not shared.

@RhinoRider2006 not a problem bro!!!👍

Thanks for watching, I had to remove several Coyote vids as they were really too many. The was a kill along that trail and they keep coming back.

Thanks for watching. sorry for the delay, out out town. the oil I use for that and in the Rhino, Quaker state 0-40

Thanks for watching

Thanks for watching. The moose on that trail are alway checking the camera. I thought it was something on the camera so I changed it with a camera on another trail they still like it. Watch for a video of a bear charging the camera and giving it some attention. That will be in my next upload

@RhinoRider2006 haha. Sounds great I will check it out!

My garage, my video. Just hit stop.

Thank you for watching. There are a few skinny deer out there, I have noticed that since April the bear and Moose are filling out very good. Many white tailed Bucks are also filling in. The Coyotes do not seem to be getting fat but then I have not seen a fat Coyote.

@jasonday4658 Thank you for watching. I have been lucky

​@RhinoRider2006 👍. how many cameras do you usually have set up, and how often do you check them?

@@jasonday4658 Hi, I have 10 cameras out. I live 1.5 hours from the forest, the cameras are located a total of 4 Km off a quad trail which I walk in and out. I used to check them every week but now it is getting more difficult for me to walk the uneven trails, I only go out every 2 or 3 weeks. If there has been a big wind I go out sooner as several of my cards will have a few hundred false triggers from blowing trees etc.

@@RhinoRider2006 Thanks for the info/reply. Appreciate it

​@RhinoRider2006 Have you ever seen any elk in Nisbet?

Thank you for watching!!

I had one Browning get replaced by Browning last year. The videos shoot in 4k. the one I replaced stopped working, I contacted browning, past warranty but they looked at it, electronic problem. Offered their top of the line camera and security box for $125.00 less than I pay for them here. The camera also triggers by noise. Thanks for watching.

Thank you and thanks for watching

Thank you! thanks for watching, they better as the forests wakes up after winter

I have more from the other cameras, will post in a day or 2. Thanks for watching.

Thanks for watching, he saw it on one day and played with it, then came back and really played with it and said this is a new camera. I have lost 5 cameras so I moved it, still using it.

Thank you for watching, will have to do better. I have had 4 cameras stolen.

Nope, live in Saskatchewan. My sister had cabin in the area, rode there from 2008 thru 2015. Thanks for watching

Was up there today getting some firewood, fell and buggered my knee again, thanks for watching

Thanks for watching

Thanks for watching. Yup, pretty sure I am well over 1200lb with all the shit I carry but I have not walked back yet. I get grief from a lot of guys about that. ON one outing I lost the axle nut, I had a spare nut ( I always keep them after an axle replacement) had the socket to put it on as well. I have been thinking of doing an addendum to this video as I have placed a few more items on it. I have placed a quick USB charger on the dash, a master shut off switch which doubles as security and does away with the parasitic drain, plus a light under the hood for night time problems

First I've ever heard of someone losing an axle nut (with how they are torqued on and staked) ..but you had a spare and the correct socket..lifesaver. Now, I have heard of someone losing the oil plug.....me. Hah. And I didn't have a spare engine with me. Dang. As far as the extra weight, mine has a rear seat and adding an additonal person may be close to the extra weight you are carrying, and I have not problem with inadequate power to run down the trail, so to those giving you grief...Get a life!

@@melrobinson6919 The first time I lost one was after I had the front brakes done by the expert at the dealership. I went out to the mountains to ride, toward the end of the first day, left front wheel went left totaled the brakes bearings.the nut was to be tapped flat on the original wheels. Had to travel 100 km to get repairs, cost me $1200.00. After that when I blew an axle ( then purchased from parts discount they came with cotter pins) I would keep the nut, bought a socket to fit and carry it. Then I must have developed a bad hub, it destroyed the bearing and spin the nut off cutting the pin, happened twice until I took it off and my buddy saw the problem. The other problem was mine, I did not tork to 150 ft/lbs. Each time I had the repairs so I could drive out.. I do not lose a second of thought when guys ask why I got so much shit on my ride. I have towed more guys out and fixed more flats for guys than you can imagine. got my machine in 2005 ( it is an 2006) I have about 1100 hours on it, all trial riding.

Thanks for watching. It might be, I have all the top Billboard hits for each year from 70 thru to 79. I am not sure what would be playing any anytime, I just like the music.

Thank you for watching

I do get a fair amount of Mulies during the year depending on where the camera is. Thanks for watching

iS THAT THE WEEKEND OF THE 16?

@RhinoRider yes. Heading up early Friday. Staying until Sunday.

Thanks for watching. if you look at the video before this one I explain how the one way should go on. This video was done 7 years ago, machine is still going strong. See the video here Change Rhino Wet Clutch Housing.

@@RhinoRider2006 👍

keeps engine braking, has never let go

Thanks for watching, they go through a lot of crap too. If you lower the air in the rear, its a really good ride.

Hi, thanks for watching. it is a 2006, has 1100 hours on it.

@@RhinoRider2006ya they are great machines. My machine is a HISUN 700 which is almost exactly the same as yours, but the parts are all made out of inferior metals and plastic. I did a pile of upgrades to it though, and I love the thing. I went on a pretty big, almost 600 km trip in the mountains with it and it made it there and back, but had a few battle wounds lol I just installed a thermostat because my cooling modificationsm actually worked a little too good. I bought one that fits a grizzly 660 because they use the thermostat and it certainly warms up a lot better and hopefully will hold my minimum temperature higher. It was running way too cool this summer when I would hit multiple water puddles on colder Days. I also bought power steering for it so I’m sure that’s going to be a game changer. I’m going to install it tomorrow. Would love to see an update on your machine if you did any more modifications to it.

Thanks for watching. I spent some time on your channel,. You are an adventurous guy,! I have done a few things to my 660 and to my wife's 700. I used the 700 to go out to check my trail camera. it got dark real fast as I was late leaving town. On my machine I have 2 14,000 Lumen LED head lights and 4 rigid pods.I found that the stock lights on the 700 are crap, just about could not find my way out of the bush as I was following a game trial. I have purchased some LED replacement lights like I have on my machine. they are about 14,000 Lumen s plus I bought 2 7 inch LED bars they are about 24000 Lumen's. I will post a video of the lights. On my machine I have installed a master shut off to eliminate the parasitic draw and theft deterrent, plus I install a dual USB super charger for charging phones and my InReach. I also got around to fixing the tail light wiring . It was always getting pulled down in the bush. I heat synced the connections and then tie wrapped them out of the way.

Is this windy mountain road english in the cariboo?if so how is the fishing? Big bows?

Thanks for watching, it is was oil injected. Straight gas in the tank

Crime is EVERYWHERE...there is no place to "move to"...if the truck is on the street or in a garage...it can easily be stolen...need a hidden cutoff switch...or remove vital component...thieves are out every hour of every day...people forget this.

@@SesameStreetRacingChannel Thanks for watching, liked the good old days when you could pull the coil wire or unclip the distributor