Donde Puedo comprar Elfa System en MEXICO

It's not working like that at all.

30 minutes of torture saved by a 20 second video. Thanks!

good lord. they chose the exact wrong angle for this video! these shelves are the least intuitive things ever.

Nice white on white on white hardware filmed from a mile away. Good choices.

If you only want to move a basket’s position, then take out the basket and the sliding part of the frame (the part with the wheels). You can then lift both brackets out with the U-frame still attached and move them to where you want them. If, however, you definitely need the U-frame out, then still lift the brackets out with the U-frame attached, even if it’s a double U-frame held together by a common bracket. Next, hold the brackets and U-frame vertical on the floor so the bottom of the U is facing up towards you. Place a rag near a corner of the U and give it a couple of firm knocks with a hammer. The bracket and U-frame on that side should fall apart. Repeat on the other side if you need to.

Nice features. Good luck with the launch.

Is there a trick to disassembling? I am trying to switch out my shoe glide and I can’t get it off the bracket.

Floor 11:46

Now show multiple with spacer recommendations because mine dont line up flush like every photo I see

Note: when you've screwed the melamine shelf you can not remove it, unless you unscrew it first. And once you've unscrewed it you're screwed. Consider using plugs

Why is there sawing involved?

They really need to remake this video and ZOOM IN on exactly what is happening. It’s very hard to see. Recommend anyone struggling with this zoom the video in (especially if you’re watching on your phone) so that you can see where exactly you need to slip the thing in

If anybody in the UK is looking for help installing or buying Elfa please get in touch

If anybody in the UK is looking for help installing or buying Elfa please get in touch

If anybody in the UK is looking for help installing or buying Elfa please get in touch

What tool is he using?

How Do you secure the rails to the wall? Do you expect the top cross rack to support all the weight?😳😳😳

I thought the hanging bar system didn't need to be screwed in the wall. Is this different when an extension is used?

I broke my fingers trying to attach those shelves! So badly designed for the non-professional user, and extremely difficult to assemble on a high 1,7 and above.

If you are installing the shelf high above you it is very difficult

If anyone, like me, is unable to remove this piece, a key instruction comes from the installation instructions: "To REMOVE the U-Shaped Metal Glide from the Brackets: Place one hand at the back of the glide. With your thumb on the Standard, gently push the glide forward with your fingers. At the same time, insert and twist a small flat head screwdriver between the Bracket and U-Shaped Metal Glide in front of the knob holding the glide in place. The U-Shaped Metal Glide should pop out of the Bracket. Repeat on the other side." The problem is that when you pull the U-shaped glide, the bracket and the vertical piece on the wall move along with it. Pull the U-shaped glide toward you (away from the wall) with your fingers, but PUSH on the vertical piece attached to the wall, to keep that and the bracket in place. At the same time, I wedged a flat head screw in between the U-Shaped glide and the bracket. If the Bracket is on the right, and the U-Shaped glide is connected to the left, the wedge should should be to the left of the bracket and to the right of the glide, if that makes sense. This video makes it hard to see. You are not wedging inside of the bracket, but in between the bracket and the u-shaped glide. Link to the instructions, see page 6: www.containerstore.com/elfa/instructions/3286238/space.pdf

I can’t see from that angle and taking these down have been the absolute worst

Wow!!

ok - I figured it out!! The plastic cover doesn't go in the opening, but you want to slide an edge of it to pry apart the shelf from the bracket. If you look at the middle tab, you will notice a small notch locking everything in place. You need to be able to 'dislodge' the notch. I used a screwdriver to create the space to slide off the bracket, but the plastic cover will serve the same purpose without scratching the paint. There needs to be a better image of it. It is really hard to explain without a picture.

This did not work for me either. The plastic bracket creates no 'space'. I also put a screwdriver in the space and twisted it to create space and then pulled from the back without any luck. I have looked at almost all of the videos on their website. I remember seeing one about using a flathead, but I can't find it anymore.

Thanks!

This could not be any less helpful. At least add some notations, something, anything!

Least helpful video ever

The instructions say to install the Standard cover before the bracket cover, but I don't really see why?

exactly what I was looking for!

@Elfa International, why is there a cut in the video exactly where the assembly is performed??

Fml I just bought one of these only to realize I need brackets for them too? 😩

اشكد يكلف هذا

Total piece of shit product.

I’ve watched this 20 times and still can’t figure out how to remove the glide frame 🤦🏻‍♂️

For anyone else trying this, the cover is used to create separation for the tab in the middle slot. Once this is separated from the bracket you can pull out the drawer frame. 👍

Mine do not have an "End Stop", plus the track is 82 1/4" long for a 6' system. So, does the track extend well beyond the standards?

You should have a link for where to buy

Are these dividers still available?

What's the item on 2:46?

Stupidly expensive

This method did not work for me. I called Container Store and they suggested that you hit the back of the gliding frame with a hammer and that the vibrations would knock it off of the bracket. It did work, after a few whacks.

This does not work

Do the uprights have to be a specific distance apart? I don't have the track system but would like a wire shelf

kzbin.infoILXEGeY4WAo?feature=share

😲🤯

Vilken skillnad 😃, bra jobbat 👏

I was missing a few of the little clips. Can I purchase JUST the clips?

The first step, as seen in this video, is to install a 'U' shaped frame. At 0:24 , you need to check that it is secure. A good test is to rattle it and see if it comes loose. Also, place one finger at the back of the U and press down. If the U falls out of place, start over. Each time you try, test again when you get to the point of 0:24. Do not proceed until you get this right! If the U is not secure, you are setting yourself for a collapse later on. For example, I have three of these units lined up vertically. I had not installed the U correctly for the middle and upper units. What happened was weeks later, once they were loaded with clothes and items, the upper one finally snapped out of place (because I had not securely put the U into place) and it collapsed into the middle unit, which then immediately snapped out of place and both then collapsed into the lower unit. This happened very quickly! I was lucky these drawers contained only clothes and small items. From this, I recommend you think carefully about whether you want to have these in a child's room. If you do, occasionally check the stability. You don't want these to collapse in a way that could end up with somebody getting hurt.