it looks like you wired them in parallel. what do you do about the white ground cable? do you use the third prong on the 110 connector for ground?
@MrPabloej12 жыл бұрын
Price?
@WesmacWorldwide2 жыл бұрын
Can you tell me the maximum height clearance needed to the top of your head with the actuators at full stroke please? I have a TR80 and am thinking of adding motion but I have very little head room, only 1400mm. Thank you in advance.
@SURG3NT2 жыл бұрын
There wired in series not parallel mate
@Simlife1012 жыл бұрын
what lorry was you driving to simulate that much motion 🤣🤣
@Simlife1012 жыл бұрын
what is the price for a 4 actuator set up and delivery price to the UK. Thanks
@Simlife1012 жыл бұрын
Great guild but with English not being your main language maybe talk a little slower as sometimes it was very difficult to understand what you were saying but as it clearly isnt your first language you did extremely well 😀
@purge982 жыл бұрын
6:56 it moved across the floor.
@lafamille28393 жыл бұрын
Ou trouver vous les actuators
@lafamille28393 жыл бұрын
Les moteur en modbus sont t il bien
@brosario52353 жыл бұрын
Time for a wheel and pedal upgrade bro
@brosario52353 жыл бұрын
100mm or 150mm travel?
@alliancegaming84863 жыл бұрын
worst seating position and pedals ive seen
@masrurumarov45793 жыл бұрын
Which models of actuators you use?
@JH-jo9wt3 жыл бұрын
Hey mate what about surge?
@kurtlinton59073 жыл бұрын
Which model actuators are these?
@RedfoxQc3 жыл бұрын
Sitting in F1 position but playing DiRT Rally 🤣
@PixelTherapy_854 жыл бұрын
Two things 1. I just ordered this kit, how are you finding it ? 2. Thars a 3DOF kit not 4DOF You have 3 degrees of freedom pitch, roll, heave.
@Globespy4 жыл бұрын
That setup at 0:50 looks way too high! Dude is nearly 3ft in the air!! Only thing I can think of is that the aluminum extrusion base of the rig was so small that it had to go that height to keep the tops of the actuators on either side of the seat to stay away from the driver's elbows accidentally knocking against them? But it could have gone at least another 6" lower and achieved the same thing without need in a ladder to get into your racing chair! The stroke range of the actuator has nothing to do with needing a placement this high. With the actuators at their minimum extension height, it's still VERy high off the ground. Why?
@Mark_Blanes4 жыл бұрын
This looks so awesome ! Did you try it with one actuator in front and two at rear yet ?
@jdeez1234 жыл бұрын
Where did you order from?
@Kyle869104 жыл бұрын
who spends this much money on a rig then goes for a logitech instead of a direct drive wheel? very strange.. wheel should be top priority before going this advanced
@Globespy4 жыл бұрын
The same kind that thinks a GT3 McLaren sports car has similar suspension travel to a trophy truck/rallyX car.....each to their own I suppose, and if you are having fun then who cares!
@HERMITBOY3 жыл бұрын
Globespy I have a logictech wheel and just bought a P1-x simlab rig, but my thought process was future proofing. Didn’t want to buy a rig to accommodate a Logitech wheel , then have to buy another rig if or when I decide to get a more powerful wheel.
@kolysion1643 жыл бұрын
he has better sensation and immersion like this, all the force are good in a motion rig, you want a DD cause you have no motion. First motion to simulate the true force.
@KuSQ3N2 жыл бұрын
Pedals over wheel
@Simlife1012 жыл бұрын
@@kolysion164 What the hell you talking about. Never heard someone say motion before a good wheel. It should go Best possible pedal set best rig best wheel base then motion. I run simucube 2 pro and simajic p2000 hydraulic pedals but i would never of gone motion before a DD wheel, no way
@fabiomendonca40154 жыл бұрын
ficou muito bem construído. Parabéns!
@jesusclemente79764 жыл бұрын
How much does this cost?
@javiermartin76634 жыл бұрын
Can you send me your presets of simtool please
@jacelaparan95714 жыл бұрын
We will be looking into it in the future... we are just busy developing surge on our motion system at the moment 😇
@geffersonh4 жыл бұрын
Great kit but the only thing need to be improve Is have one box solution. Like Thanos controller and custom servo driver in one box with less cable as possible. 👍🏻
@daduke79904 жыл бұрын
All good, nice set up. Looks like you're bouncing around a fair bit. Are to able to turn down the travel at all?
@jacelaparan95714 жыл бұрын
Da Duke yes, i dialed the settings way up high
@daduke79904 жыл бұрын
Shoes man. Shoes!
@jacelaparan95714 жыл бұрын
Da Duke yeah man 😂.. a bit excited to hop in
@lagartija1014 жыл бұрын
Buy link?
@jacelaparan95714 жыл бұрын
lagartijaRacer facebook.com/phlPTactuators/
@Rave-agent2 жыл бұрын
@@jacelaparan9571 Anywhere other than that cesspit?
@masmagalingako4 жыл бұрын
how much was that kit?
@jacelaparan95714 жыл бұрын
masmagalingako whole set up is around $10,000aud including gaming laptop
@arnoldg30764 жыл бұрын
@@jacelaparan9571 Cool Thanks!
@netgeek30104 жыл бұрын
Hi I have access to 220 volt AC outlet where I have two hot wires and one neutral could I attach the two hot wires one on l1 and the other on l3 and neutral on l2?
@fulybuilt4 жыл бұрын
Very cool but there has to be cheaper solution for actuators in the world
@prodr0xxthefirst2674 жыл бұрын
I think there's a bit more too it than that, but if you design, prototype, build, test, change bits of design, test again, manufacture first customer ready one and then ship it all under $3000 then I would be very, very interested.
@toolanddie97894 жыл бұрын
Is that a simlab evo rig?
@VikingElitePC4 жыл бұрын
how do we buy your products?
@jacelaparan95714 жыл бұрын
Viking Elite Racing send us pm here: facebook.com/phlPTactuators/
@lazybeargamer36104 жыл бұрын
Thanks for the video . Will help lots of people . Would recommend you suggest the video to new users .
@misoswan10874 жыл бұрын
any plan for stoke 150mm?
@jacelaparan95714 жыл бұрын
michal hrabovcak we can make 150mm stroke if you need them. Send us pm @ facebook.com/phlPTactuators/
@nicolassosa28894 жыл бұрын
Hello i just received my kit from pt actuators and I’m missing wires and screws. Been waiting weeks for it, I’m so disappointed. Did anything of that kind happen to you when you received your kit?
@JH-jo9wt3 жыл бұрын
How'd it all go in the end mate?
@FordEntertainmentGroupFEG4 жыл бұрын
What can i say. Im aroused.
@houssam27464 жыл бұрын
Hello nice video, i'm interresting to buy 4dof for my simulator racin so i started to serach and i found this video, do you think i used for rasing?
@jacelaparan95714 жыл бұрын
HOUSSAM HAOUAS Hi mate you can send us pm on our fb page here: facebook.com/phlPTactuators/
@tronicgr4 жыл бұрын
www.pt-actuator.com/proshow.asp?strID=174
@wajdi19775 жыл бұрын
If you want to join our PT owner club what’sapp group 00972-0537717510
@ndrobins5 жыл бұрын
Finally happy to see that you've posted a full track event utilizing the PT-Actuators with what I assume is the THANOS controller. Is there a price point to consider within the description above...??? Thanks ;-)
@JASKI765 жыл бұрын
It looks pretty good set and fast.
@jacelaparan95715 жыл бұрын
jarha thanks mate, settings are not 100% yet 😎
@NischGTM5 жыл бұрын
What is the stroke on those actuators?
@jacelaparan95715 жыл бұрын
Factory Five GTM #31 450mm
@JaysRPGAdventures5 жыл бұрын
How much for the actuator kit like this?
@jacelaparan95715 жыл бұрын
Hi mate please send us message at facebook.com/phlPTactuators/
@vxtwist63253 жыл бұрын
@@jacelaparan9571 link isnt working do you have a site yet