2 ай бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@mchristian8810 9 күн бұрын
GOOD JOB
@billypirtle1443 Ай бұрын
Take the glow plugs out of it and ture the motor over get the oil out of pistons put glow plugs back in and start her up done that once.
@kakazouheinou4923 Ай бұрын
Its 2024, sorry you didn't know that a drum chipper is the way to go and not a disk chipper. Disk is best with auto feed. Drum is best for gravity chippers as it pulls the sticks, also costs less
@jamesjenkins3384 Ай бұрын
Have felt mine tipy on the slightest hill incline. Glad your ok.
@KompleteMan Ай бұрын
is it shipped worldwide?
@nolanklein3370 Ай бұрын
I’d imagine it would be I ordered mine from eBay
@quercuslobata3776 Ай бұрын
I have one of these. After 2 hours of chipping dry western juniper - shaggy bark cedar, both blades were heavily chipped. Western cedar is extremely hard when dry. I had to flip the blades around. The machine itself is pretty beefy and does a great job. But here are a few things you might want to consider. It appears that only a few parts are stocked here in the US. I ordered the extra belts, blades and cover.. Still waiting for them to arrive. It's been 2 weeks since I got the chipper. They were shipped from mainland China. I had a few issues with the shipping. The unit was damaged in transit. Gas cap broke, rope pull crushed, gas tank and exhaust shield damaged. One key was broke and other was missing. The company was quick to send replacements, but they are also coming from mainland China. So if you are using this machine in a commercial capacity, Order several sets of blades and belts.. Otherwise, your machine might be down for several weeks waiting for parts.
@nolanklein3370 Ай бұрын
I appreciate you sharing your experience and advice! For the money, these chippers are worth it.
@quercuslobata3776 Ай бұрын
@nolanklein3370 Absolutely! You can buy a better machine, but it will cost you a lot more . Good value, well built. But I was a bit disappointed with the blade quality. I wish they had a carbide option. Was thinking of seeing if the blades could be tempered better. Got my additional belts, etc, yesterday evening. I have the Ducar and it runs great. Should have the damaged part replacements in a couple of weeks. Company responded immediately, which was great. I am going to add an hour meter. One other thing that I noticed was the trailer tongue seems a bit long. Unless your truck and chipper are in a straight line, a big portion of the chips miss the bed. Not a big issue for me, but a landscaping company might have an issue working on the street.
@quercuslobata3776 Ай бұрын
@nolanklein3370 I should mention, be sure to check the feed end for hard chunks of wood that might be caught between the drum and bed. Do this before starting. If one is caught, the drum won't spin. Belts will slip. I thought all the wood had been chipped and discharged, but one small half inch thick by 4 inch piece was left in the hopper. When I went to restart it got wedged.
@jetthelooter Ай бұрын
Training wheels might help
@ateddy7901 2 ай бұрын
is shoot high enough to clear pickup bed when shooting out chips..
@nolanklein3370 2 ай бұрын
Yes! Sometimes if you are chipping, a very thick 5 inch branch. It will not throw the chips as far and about 5 to 10% of the wood chip don’t make it to the bed. 90% of chips make it into bed
@irvingluna4914 2 ай бұрын
I’ll be shopping soon for a chipper, only saw you put in branches and no thinker stuff… how is panning out?
@nolanklein3370 2 ай бұрын
I didn’t film at the job I took it to, but it did chip 4-5 inch, almost log length perfectly fine, although at that point, that’s firewood size. Get the chipper thought, it’s great for the money. 10/10
@phillipcleaver7063 3 ай бұрын
Mate , hard work can only be done with a hard , heavy machine , this company are expert at getting very many versatile solutions out of their products , but the base unit needs to be heavy to continue standing upright . There was always a safety sticker inside Bobcat ROPS cages , which reads "WARNING -AMONESTACION - CARRY LOAD LOW , it really means it ! we work bobcats by in effect strapping them to your back , I,ve picked up a big bale in a little bobcat muck grab & positioned it , to the disbelief of my mate , because I was skating along on just the front wheels & couldn,t feel it . Work safe mate or work dead .
@antoncarmoducchi6057 3 ай бұрын
I have a BX25. Very disappointing machine. Nearly tipped many times. Under powered and overheats.
@nolanklein3370 2 ай бұрын
For it size it works pretty good
@alanbanks9677 3 ай бұрын
Less haste more speed.
@dickiedo136 3 ай бұрын
were you in 2 or 4 wheel drive?
@nolanklein3370 3 ай бұрын
Both, depends on terrain
@stevemino142 4 ай бұрын
1995 was a great year and rode a lot that winter of 94/95 and 95/96 back when I my had my 1967 johnson snow cruiser and a 1977 John Deere trail fire 440 great video
@daleotto5748 4 ай бұрын
Thanks for your videos I had the same Touring sled and I had Formula 800Tripple and a Blizzard 500, before I got Yamaha 600and the last sled I purchased new was 1st year Yamaha RX1 1000FourStroke . Your video of the Touring sled was my 1 nice new sled. I had owned many Many sleds but it was my first new electric starting sled with Pics in the Trac. I lived in Massachusetts and started riding in the early 80s. So thanks for the memories Dale
@michaelfink1017 4 ай бұрын
Just picked up one of these...how do you like it?
@nolanklein3370 2 ай бұрын
I sold it years ago, but I liked it when I had it. I wish it was four-wheel-drive.
@gillougil6026 5 ай бұрын
Travail de cochon
@FrancescoPugliese-tb4nf 5 ай бұрын
Nice video what machine and setup?
@nolanklein3370 2 ай бұрын
It’s a 2019 Kubota BX23s, and by setup, I’m not sure what you mean, but I have over 20 different attachments.
@Rjs-1949 5 ай бұрын
Did that myself. Motor would not shut down, revs increased, broke drives haft. Couldn't get out of seat belt. Lots of boots and other parts broke . 6k dollars repair bill.
@MarkDecamps 6 ай бұрын
This is why I won't buy a used tractor. Lol
@nolanklein3370 2 ай бұрын
I myself wouldn’t even buy a used piece of equipment. They are usually beaten on.
@Lawson-i2o 6 ай бұрын
Bushing
@nolanklein3370 2 ай бұрын
I’ll actually have a video soon of brush hogging a field again. It is that time of the year.
@ohiyotrippole6645 6 ай бұрын
Will the tractor handle the cutter without the bucket attached? Thanks!
@nolanklein3370 6 ай бұрын
Yes it should, although I never tried it, it feels like it should. Just keep it slow
@ohiyotrippole6645 6 ай бұрын
@@nolanklein3370 Have woods mowing to do and need to be as compact as possible. Do you happen to know if the front weight kit is in the way of the loader? Have loader and use regularly.
@GB-lg6ge 7 ай бұрын
Loader to high while moving......Big no no
@Buddha-of8fk 7 ай бұрын
I bet your butthole was puckered up with that one. Gravity sucks!!
@charkswim55 7 ай бұрын
Get different music or no music
@nolanklein3370 2 ай бұрын
Get a different comment or no comment
@eroom2087 7 ай бұрын
I would love to own that machine
@nolanklein3370 7 ай бұрын
They actually offered to sell me it for 260k lol
@eroom2087 7 ай бұрын
@@nolanklein3370lol, how much to rent for a day
@nolanklein3370 2 ай бұрын
It was around 1500 a day
@busyboy7635 7 ай бұрын
Man, you're rough on that poor tractor.
@nolanklein3370 7 ай бұрын
Yes sir!
@damonr2233 8 ай бұрын
Need to chain that pto shaft cover !
@nolanklein3370 7 ай бұрын
What do you mean?
@damonr2233 7 ай бұрын
The cover on your pto shaft, technically supposed to have a chain on each end to keep the cover from spinning with the shaft. There are even grease fittings on the ends of the cover.
@DavidJones-smiley 8 ай бұрын
Man was stealing road signs
@nolanklein3370 7 ай бұрын
I’d say he was!
@edwardcarberry1095 8 ай бұрын
Starting and stopping your engine will kill it. No , I am not going to watch the whole thing. carry your bucket always below the hood line. Years ago someone rolled a Ford 1700 carrying sawdust. Bucket was up to high. Judging what I see you don't need to brushhog. A small trailer will work for moving the boat. cheers
@tomclements7590 8 ай бұрын
Leave the logging to people that know what they are doing. U get off flat ground with that little kubota you'll get hurt. U want to play logger you will get hurt.
@ultra9693 8 ай бұрын
You spend 30000 on a tractor and don’t bother to put a block heater in. No to bright.
@stevedisbrow8236 8 ай бұрын
What RPM were you running?
@nolanklein3370 7 ай бұрын
The higher side, around 3500 to 4000
@effthegop 8 ай бұрын
It doesn't take much of a hole or log combined with an already sloped path, but I haven't done it....yet. It looks like your forks being high up didn't help :)
@chevyblazer944 8 ай бұрын
Sale the tractor while your still alive and walk away before you get killed by a tree or flipping the tractor again and not be so lucky the second time
@laszlobatori4849 8 ай бұрын
Igazi hülye gyerek vagy!
@danu3247 8 ай бұрын
Nice job! Not much contamination...and it doesn't always go that way!
@normanrogers826 8 ай бұрын
There's a lot of people who buy equipment that have no😮 idea how to run it and that's why this happened .
@danhunik7949 9 ай бұрын
Every time I see a small tractor on its side the loader is raised up high. I never move my tractor unless my bucket is as colse to the ground as I can get it.
@Huntersprojects 6 ай бұрын
Sometimes it’s unexpected this one looks like it could’ve been avoided but there’s cases where the machine is tipped and it’s unavoidable
@MountainHacker 9 ай бұрын
What!? Boat in the woods!? Is it only me wondering how that got there?
@nolanklein3370 9 ай бұрын
Not sure, but I’m going to have a video soon on pulling it out of there!
@walterwhitaker1395 9 ай бұрын
F.Y.I. For those who don't know Possession of road signs without written permission from the State or County is a FELONY! These signs were paid for with tax payer funds! You should contact the police and have them get department of works to reclaim them! This is no joke!
@JoelGraham-rx8qj 9 ай бұрын
Have you had any issues with this machine yet?
@nolanklein3370 9 ай бұрын
I no longer have the machine, but it never had any major issues.
@mikecopenhaver4484 9 ай бұрын
Hope you have good insurance, you are going to need it!
@gaujio 9 ай бұрын
Im Wald sind schon ganz andere Fahrzeuge auf der Seite gelegen. Aber warum man sich das mit diesem Spielzeug antut ist mir ein Rätsel. In meiner alten Firma hat ein Kunde fast einen tötlichen Unfall mit seinem Hoflader im Wald gehabt. Diese Fahrzeuge kämpfen schon in der Ebene auf fester Fläche im Bereich der Lastgrenze mit der Standfestigkeit. Lass dir das eine Lehre sein.
@JoseRivero-js5ow 9 ай бұрын
Pero que isistes no te lo presto MÁS No vistes el tronco ja ja SALUDOS
@ThisOldMan-ya472 10 ай бұрын
Great safety training video with about SIX major mistakes. Apparently neither operator has much equipment experience. Also very little mechanical knowledge, as the injectors or glow plugs should be pulled, engine cranked, then reinstall parts and fire it up.
@spiroschitiris2751 10 ай бұрын
I bealive the Bush hog is not for this model..looks bigger...so if it find a root that didn't trimmed make the tracton wheeling and with the fork that High combined with the field angle...there you go flipin!! Be careful respect the machines
@AlexLindley-u5f 10 ай бұрын
What possesed you to pick that MIND NUMBING Diatribe Tune ??
@starfireolivier1452 10 ай бұрын
fiabilité sur les bx de chez kubota , a 2500 h boitier de direction a changer sur bx 2200 et bx2350
@thegreatnorthwoodswithbb2863 10 ай бұрын
50 years with tractors haven't rolled one yet.. had them on 2 and 3 wheels many times.. just need to know when to compensate with the loader