Show how to replace the inside

Info was super helpful... basic stuff for a plumber... but for me it was priceless 👍😎

Please explain why the traditional taps in my utility room and downstairs loo have never failed on over twenty years of living here by my less than ten year old kitchen taps with modern ceramic taps have had to be repaired several times. I’m about to replace the whole taps only three years after my last repair. I’m sure modern taps are made to fail quickly.

Is this effective? I have this in my toilet, warm to touch but doesn’t heat up the toilet at all

It's not the ceramic discs that fail it's that rubber washer at the end when it worn it stops applying pressure to join the two discs together . I used a regular rubber washer to repair mine

I like ceramic, it's for life

Easy to install, kzbin.infoUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.

I got a similar one from Victoria plumbing but the hair gets clogged in the inlet before it gets into the cup. Makes it even more unpleasant to clean.

I had to replace the ceramic valve on my 2 year old kitchen mono tsap cold side 3 times I used the costly correct from bristain and they where usless so I went back to rubber no drippy taps keep your ceramics

I have the same one

Great item!

just as it should

If you have a ring circuit sour off only socket and feed the radiator into FCU fused switch.

Replacing rubber washer costs pence..Replacement ceramic washers many £s ; that is if you can find the right one. They drip ater about 4years. This man is making his living selling stuff that needs expensive replacements.

With the old tap washers they were cheaper and easier to replace it won't be long before people start buying the old tap systems My Daughters taps started to make a whistling noise ever time she turned on the tap so switched them back to the old systems and no whistling.

This is the worst invention then comes the push button on toilets both the old systems were cheaper to replace or repair.

We have never had a problem replacing rubber washers on our taps. They cost next to nothing and last years. These ceramic values are expensive and in our case, fail about every 2 years. Ceramic valves seem like a good idea, but unfortunately, evidence suggests otherwise.

You lie about ceramic disc washers. I have used both and rubber washers are much better and longer lasting and cost at the least 4 times less to me

Ceramic valves last 5-6 months only due to hard water at our town.

My taps have ceramic discs, & i'm sick of having them replaced, they only last 12 to 18 months, & work out expensive. Kitchen one has gone again, taps dripping, plumbers coming tomorrow!

Does work in a central heated towel rail, anything else i should know.

Can I replace a compression one with a ceramic one in the same tap?

Good video, but if you find the headnut is stuck fast, look out for the easy tapslitter, makes it so much easier.

Hi. I just replaced my ceramic cartridge. I bought ceramic disc washers but I still end up replacing the whole cartridge. Why are the old rubber gasket faucets more durable? There seems to be two small rubber O-rings on the handle part that seems to wear out as well. Thank you. God bless, Revelation 21:4

My is taking 4 hour to heat up and just gets bit warm new electric one

Waste of money, they drip after a while, expensive and can be hard to find.

The actual bars to hang towels is 21 1/4"◉◉>imgs.love/HTowelWarmer?mn The overall unit is a little less than 24" including the vertical bars. The unit works very well.

The actual bars to hang towels is 21 1/4"◉◉>imgs.love/HTowelWarmer?tu The overall unit is a little less than 24" including the vertical bars. The unit works very well.

Does anyone agree with me That this is pure tucking bollix.

I have one of these and would never buy again. The depress buttons on mine dont release the seat anymore. Its stuck on.

they sell everything so expensive on their website... people wont' buy it... it's only for millionair people to buy.... i don't know what they are thinking... SO EXPENSIVEEE..i won't buy it..NO MONEY

Excuse me sir, if they are better than the old ones, why do they sell replacements ?. I recently, had leak with the ceramic tap, and what I did was just insert a rubber washer, the one that the old tap use, and it work, save me many bucks.

How much do the valves cost and which of the valves was for a floor outlet or a wall pipe?

Sar hindi me trashlesan

Do you have to remove the faucet seat when replacing Compression Faucet (rubber washers) Cartridges With Ceramic Disc Cartridges ?

10 years is just about right. My kitchen tap starts to drip in about 9 years. Single occupant and seldom needs to use the tap in the kitchen.

Can you adjust the heat?

Thanks!

Ceramic discs are great until the tap drips. Then it becomes a nightmare trying to obtain a replacement insert. There are so many different tap inserts out there with different splines and dimensions. It's pot luck whether one can get a new insert or end up having to change the whole tap. Give me a tap with an ordinary rubber washer anyday over a ceramic disc. So much cheaper and easier to replace when they go wrong

For more information, please visit: www.alibaba.com/product-detail/An-Warm-Towel-Warmer_60751179583.html?spm=a2747.manage.list.4.3d4b71d2mPbrjG

Dodajte mere

I prefer the rubber type. Had a ceramic, less than a year it leak and having to replace it is costly. 10 years warranty you said. Well a rubber washer can last longer than that and cheaper. I notice the ceramic "door" closes just about a mm, why can they make it closes 4 mm instead. That is the main problem. Now I am collecting rubber washer type tap for my home.

Thanks for nothing as look nice but have to install it in brick wall without instructions, worst instructions ever 👎👎👎👎👎

Mine needs replacing after 3 years at a cost of £23 wheras a tap washer costs <£1.00. QED

They are no good for low pressure feed . Did a whole bathroom refit myself. Had a standard bath mixer no pump etc before and shower pressure was fine with old style full turn tap valves . new mixer are 1/4 turn Ceramic and pressure is down by half . Changed them out for old style full turn and bingo back to normal. warning unless you have or putting in a pump or you have high pressure system give these values a wide berth.

I have quarter turn ceramic and have to replace them every 2-3 years cause they start leaking, Also cost a lot more then a rubber washer. The cheapest I found was $10.99 (USD) each . They are very easy to replace though.

Amazing bathroom ideas... so soothing... you may have luxury #steam #showers at affordable price only from @JTSpas Check out yourselves www.jtspas.co.uk/steam-showers-2158-c.asp Up to 60% OFF

quarter turn valves are costly in my country but they are so easy to use so i change all my taps to the new ones ,u sad that quarter turn all last old taps that uses rubber seals i dont think so i cgange quarter turn catridge twic a year on sinks that are use most

Had no end of troubles with ceramic washers; and costs much more to replace in our country! The older taps with rubber washers are outlasting them many times over.

This commercial caused 9/11