Hey. All good to feature it? Full credits + notification. Thank you in advance!
@GarrettChumchalКүн бұрын
@@therealbikerz yeah go for it thanks
@therealbikerz33 минут бұрын
Hey. I've used it, feel free to check it out & tell me your thoughts. Thank you in advance!
@XFTERTHEPARTYLUIКүн бұрын
i love how u said nothing the whole process🙌🏾thinking about subbing😭
@GarrettChumchalКүн бұрын
@@XFTERTHEPARTYLUI hahah thanks much appreciated! Almost reached 1000 subs. Some vids I just don’t feel like talking lol
@Super_Bros.4 күн бұрын
I am hoping to install moving eyes on my dummy. This video is definitely helping my resolve.
@GarrettChumchal4 күн бұрын
@@Super_Bros. thanks! Can u pm me? Or provide email here and I’ll delete it after I send you something. I have a downloaded ventriloquist book pdf from years ago and can send a screenshot of the couple pages on making moving eyes. It has a part for free moving eyes which is how I figured it out
@GarrettChumchal4 күн бұрын
@@Super_Bros. no worries I just sent the whole booklet download. Let me know if u get it
@Super_Bros.4 күн бұрын
@@GarrettChumchal Spectacular! Thank you!
@GarrettChumchal4 күн бұрын
@@Super_Bros. no problem! I got the brass tubes and rods from hobby lobby. The pvc pieces have a little lip so the round wood eyes can’t fall out forward so just keep that in mind. A big heavy duty glue gun will make the whole thing a lot easier as well. Hope it turns out awesome
@Alejandr-io3oe4 күн бұрын
Will doing this cause the gun to rust?
@GarrettChumchal4 күн бұрын
@@Alejandr-io3oe no I’ve carried it over a hundred times in a pocket holster and taken to range a few times since and it is still pretty shiny with no deterioration at all
@BasilViste-j5l4 күн бұрын
Cecil Corner
@tcmt8 күн бұрын
Thanks for your review.
@GarrettChumchal8 күн бұрын
@@tcmt your welcome! Thanks for an awesome and affordable product!
@Gshock71412 күн бұрын
An additional upgrade you could do is change the trigger to a keep tinkering one it's only between 25-35 bucks way cheaper than Glock Zev triggers and it works and feels the same as a Zev..the keep tinkering trigger is night and day compared to the long pull on the stock one but only downside is you lose the restrike capability of the double action but who uses those anyways
@GarrettChumchal12 күн бұрын
@@Gshock714 I hear you. I actually did put one in my g3c and have a video review of it lol. I love it. I def want to put one on my g2c eventually as well because I agree they are a game changer. Since I got the g3c without a safety the g2c has been a backup and lately I have been carrying the Taurus 856 snub nose with the g3c for night shinanigans
@salsamancer12 күн бұрын
The first rule of motorcycling is "you will eventually drop your bike"
@trieuhuan10612 күн бұрын
Nice
@CaptainCandycorn13 күн бұрын
Cruisers are so silly lmao
@GarrettChumchal13 күн бұрын
Exactly how I feel about crotch rockets. To each their own
@ChoooChooo12 күн бұрын
Your little ninja 300 is so cool bro! Lol
@He8MyHand13 күн бұрын
In future, pull the clutch and get off the road before trying to start it again. Always get to safety first
@GarrettChumchal13 күн бұрын
I agree. I was caught off guard and unprepared. That’s exactly what I would do now. Crazy how much you can learn in a month of practice
@sethmorgan549313 күн бұрын
Is the Shadow your first bike? Thanks for sharing your drop, even if it may be embarrassing or humbling to show your faults. Your video will help other new riders be mindful! Treat it as learning experience, and be thankful it was low speed in a somewhat controlled environment. Glad you are okay! Respect the machine, respect your own skill level, don't lack on maintenance, doubly so for older bikes like this. Ride safe, and have fun!
@GarrettChumchal13 күн бұрын
@@sethmorgan5493 thanks for the comment! Yes it is my first bike and it is pushing 50k miles but still runs like a top. Before purchase it had a carb kit. I replaced spark plugs, oil, final drive oil, coolant and a few other things but will not take the tires lightly anymore. Yes hopefully it can help others! I will always keep the GoPro going to catch anything like this but hopefully only smooth riding
@csyarid13 күн бұрын
Nothing to be embarrassed about...we've all done it. Anyone who rides bikes and says they've never dumped it is lying. FYI, WD-40 is a solvent. NEVER us it as a lubricant. It will eventually gum things up.
@GarrettChumchal13 күн бұрын
Thanks brother! Much appreciated! Oh wow good to know. I will keep that in mind! The bearing stopped making the noise but I'm guessing it could use being changed out regardless. Any luck with the cheap Amazon bearings or any suggestions where to get it? A coworker of mine said he changes his bearings at the plant all the time since we have a bearing press so he's going to help me swap it out.
@csyarid10 күн бұрын
@@GarrettChumchal Never used Amazon bearings. I usually buy mine from a reputable aftermarket supplier like Brocks or Graves. Yes, you pay a bit more, but you know they are good bearings.
@GarrettChumchal9 күн бұрын
@@csyarid alrighty thanks. True. Not something to gamble on
@moto-stars14 күн бұрын
Hey, may I use this video in my upcoming episode? I'll make sure it's watermarked and linked to your channel
@GarrettChumchal14 күн бұрын
@@moto-stars yes thanks for asking me. Go for it
@moto-stars10 күн бұрын
@@GarrettChumchal Thanks!
@dirtbikelunatic14 күн бұрын
Hello! Would it be okay to use this in compilations and possibly on some of our social networks? You will receive full credit for it. Thanks!
@GarrettChumchal13 күн бұрын
Yes of course!
@MikliBafis-g5c16 күн бұрын
Metz Lights
@TommyWright-t9d16 күн бұрын
Ondricka Rapid
@straightshooterz19 күн бұрын
What area is this? Every time I go the shores are loaded with ppl
@GarrettChumchal19 күн бұрын
@@straightshooterz turkey cove. The boat ramp has been closed for well over a year due to low water so not as many boaters as usual. Still pretty busy on the weekends but you have enough room to spread your wings and slam some good fish
@AshleyKuhlmann-wi5bj20 күн бұрын
I should have known he would get us matching helmets since we are almost always matching when we go out and we don’t even plan it! 😄😀
@GarrettChumchal20 күн бұрын
Hah no joke! Yeah I figured it would look weird with two people on the same bike with completely different helmets. We gotta look like we know what we’re doing out here hahah
@AshleyKuhlmann-wi5bj19 күн бұрын
Haha lol yup, that’s true.
@mochagunny622922 күн бұрын
Nice job there Matt Dillon.😊
@Iamyonatan22 күн бұрын
What kind of paint did you use?
@g_pressley24 күн бұрын
I found one on Amazon as well for $20. Surprised there aren’t more options for holsters with light compatibility for taurus
@GarrettChumchal23 күн бұрын
That's def a downfall compared to Glock where they have 2 million different options. Just grab one despite bad reviews people are so picky and will discourage giving it a chance. One guy was telling me a great leather option earlier in the comments. I'll let you know if I can find it. Honestly I really love the in pocket soft simple holsters now and use them 90 percent of the time. Though appendix is much quicker on the draw
@mbrrideitlikeyoustoleit843625 күн бұрын
Bro return that huffy get on market place or offer up and buy a USA built bicycle so you don’t get hurt.
@mbrrideitlikeyoustoleit843625 күн бұрын
You are looking for felt/ Nirve/ micargi /Electra/firmstrong/phat cycle/there’s so many good frames that fit the predator where you don’t have to cut the frame and there built with thicker metal frames.
@GarrettChumchal23 күн бұрын
Thank you sir but no worries my friend I have decided this build is complete as I wanted to start saving for a cruiser motorcycle. I just got a 1998 Honda Shadow Vt1100c so I will no longer be riding the John Deere to work or on long trips. It will be for trails, camping, local fishing adventures and so forth so I will be safe. I appreciate the information and will keep in mind for my next build. I really want to motorize a kids little jeep toy thing lol. Just gotta work on having kids first so I can have an excuse to buy one lol. Just got my motorcycle license yesterday so I caught a motorcycle bug. The class had 120-200cc motorcycles that could absolutely haul ass and they go for so cheap
@mbrrideitlikeyoustoleit843623 күн бұрын
@@GarrettChumchal awesome ride safe brother I still love John green bike.
@crnobradАй бұрын
Incredible bike, have the same one from 1994. Just make sure it's having enough oil and you can drive it till the end of the world and back. And be ready to replace the stator and rectifier once in a while.
@GarrettChumchalАй бұрын
@@crnobrad nice I changed the oil right when I got it and filled it a little too high but doing good with no leaks. I am def loving it. What are the symptoms of a bad rectifier and or stator?
@crnobradАй бұрын
@@GarrettChumchal Slow start, it would sound like the battery is dead. Also you will start losing power while driving. You have couple detailed videos on yt how to replace it.
@GarrettChumchal28 күн бұрын
@@crnobrad Ok cool thanks! It does start right up. I let it sit in choke for 10-15 seconds before cutting off the choke and let it warm up 2-3 min before driving. It struggles a bit in first gear when first driving. The previous owner had a carb kit through the carbs and I was thinking they may need to be gone through again but wonder if it has anything to do with the rectifier stator. I'll have to do some research but it's not running too bad.
@Texas2Step79Ай бұрын
Dont drop the slide on empty chamber its the mark of an amateur...
@asimhussain8716Ай бұрын
I see you were about to order that Micargi stretch cruiser. I was DYING to do a build using that bike, but could not for the life of me figure out how to mount the engine while maintaining the pedal and bike chain, since its position puts it right next to the engine as opposed to below it on standard bikes. Did you have a plan accounting for this? Or just ditch the pedals?
@GarrettChumchalАй бұрын
@@asimhussain8716 yeah that bike would be so sweet as a little cruiser build. I was planning on getting rid of the pedals all together so I didn’t even think of that. I decided 700 plus dollars for a bike was too much and that I should start saving for an actual motorcycle which I did and I found a good running well taken care of Honda Shadow VT1100c for only 2000 dollars lol so had to jump on it
@xxtrapxxАй бұрын
Id recommend using white diamond and use the Dremel with it then get a cotton buffing pad and use mag polish after to get a more shiny polish look
@GarrettChumchalАй бұрын
@@xxtrapxx alright cool thanks. I’m going to have to try that for round 2
@fil-amphilippines5157Ай бұрын
Nice video brother, quick question so the holster is interchangeable between the two? I'm getting the Taurus TORO G3C soon and kinda hard to get a good iwb kydex for the G3C where I am. So in a pinch it's ok?
@GarrettChumchalАй бұрын
@@fil-amphilippines5157 the g2c holster will not fit the g3c because it’s a tiny bit fatter but the g3c holster I have here will or should fit the toro because the top is cut out for an optic. I believe it should. Def type g3c toro holster to make sure if you can order from Amazon
@GarrettChumchalАй бұрын
And thanks!
@fil-amphilippines5157Ай бұрын
@@GarrettChumchal thanks bro, now I gotta find one that's really ment for the G3C. Sadly for some odd reason Amazon won't let me send holsters overseas. So gonna have to find one locally
@GarrettChumchalАй бұрын
@@fil-amphilippines5157 of course! Dang that sucks but good luck. Worst case you can probably make a leather one that would be more comfortable anyways. Just need some sort of metal clips
@julianthegodmusicАй бұрын
Keep the G2c. Affordable, yet durable, I’ve had zero problems and I’ve fired hundreds of rounds thru it for sure easy since I’ve had it.
@GarrettChumchal23 күн бұрын
Yep. I decided to keep the g2c as a backup upgraded to the g3c as primary along with my optional Taurus 856 38 special snub nose revolver (Which I love for pocket carry). The G2C and G3C and Revolver will remain in my arsenal until I am dead and willed to love ones because they are all little gems. My G3C did away with the safety which I prefer but the g2c is a bit slimmer and has the cool desert eagle type front section slide.
@ADdas47Ай бұрын
Congratulations brother Happy future ahead to both of you 💙💙
@GarrettChumchalАй бұрын
Thank you very much!
@jrnumex9286Ай бұрын
bought one 4 yrs ago when everybody had them. should have got 3 now nada
@GarrettChumchal23 күн бұрын
Hahah no joke! I was broke as hell when I bought mine so it was a big purchase for me but I wish I bought 1 or 2 more. If I see one at a pawn shop i'll absorb it like a sponge. sweet little pocket poppers
@ykmtheoriginal6828Ай бұрын
considered this. but for sure would need a wet sand and clearcoat.
@GarrettChumchal23 күн бұрын
Yep. After a few cleanings and disassembly for new trigger it has gone from factory new to minimal worn/field tested but it has character and I like it. Looks like a vintage old army sidearm. Can always use paint thinner and redo but to me it's awesome.
@ykmtheoriginal682823 күн бұрын
@@GarrettChumchal i been experimenting with my barrel and spray can painting it. so far anodized purple in auto spray paint section has popped the most.
@duanemcclun9924Ай бұрын
I have both - the PT steel frame with Rosewood grip and gold color safety lever and the PT Poly. I'm curious what ammo worked best in them and do you prefer to use oil or grease on the slide?
@GarrettChumchal23 күн бұрын
I use the cheapest stuff you can buy in the green boxes from Academy. I have lightly oiled it once or twice and it has never misfired once. I will break it down eventually but it's a little tank built to run like water
@duanemcclun992423 күн бұрын
@@GarrettChumchal That's interesting. For some reason my poly Hayes Winchester bulk bullets. CCI, Stingers, Remington Golden, and Federal Punch shoots fine. Aguila 38 gr hollow points were mixed results. Best Duane
@3rdblockjАй бұрын
Thats 🔥 im gettin a tan one imma paint a few mags tan so it can be like a 19x 😂
@GarrettChumchalАй бұрын
@@3rdblockj nice just sand them down pretty good and only do one coat and you should be fine
@lilbuck3349 күн бұрын
Or just get a 19x
@KevinToddАй бұрын
I'm glad you're OK I don't like fenders I don't have a Fender on none of my bikes ride..... safe
@GarrettChumchalАй бұрын
@@KevinTodd thank you! Yep they are removed but I just upgraded to a Honda shadow Vt1100 so won’t be riding it too much anymore lol. Mainly for off-roading because it’s basically a dirt bike now
@kimnielsenthewordyvikingett159Ай бұрын
I had no clue they existed??? I've never even heard of them!!!
@GarrettChumchal23 күн бұрын
A john deere motorized bike? Yes it's not really a john deere just a john deere inspired or themed. hehe :)
@user-2df90a0z1Ай бұрын
Did anyone else have their G3C frame crack on them? My frame cracked and is currently being warrantied out… the frame plastic seems very thin…
@GarrettChumchalАй бұрын
Thank you she is a beautiful beast
@ВадимВавринчукАй бұрын
шадовка це красотка
@ВадимВавринчукАй бұрын
хую це хонда
@GerardoRodriguez-bg8emАй бұрын
Love my PT Poly❤
@JDStaffyloverАй бұрын
That gun hasn't seen much use. Looks brand new. The slide on mine shows the wear from firing it.
@AshleyKuhlmann-wi5bjАй бұрын
I love it and I love you so much!! ❤️😘 The best YES I have ever said yes to!
@GarrettChumchalАй бұрын
@@AshleyKuhlmann-wi5bj Thank you sweetie 😘
@sw8859Ай бұрын
Great video, thank you! Have you found that hot air or cold air comes in? I’m worried about leaving my door open all day with the storm door and having my air or heat work double time.
@GarrettChumchalАй бұрын
I believe I used normal bits and it's at my moms so not sure but it's pretty well insulated. She loved it and said it works great. You just have to get the trim fitting tight. The doggy door doesn't let too much weather through
@niteshades_promiseАй бұрын
fenders didn't last on my phatmoto very long. i do not recommend. 🍻
@GarrettChumchalАй бұрын
I hear that. I am doing without them now after the new larger tire upgrade. Don't want to have to worry about them.
@davidotto7666Ай бұрын
Hey bud I just want to see you did a good job on building a John Deere bike that came out pretty decent I like that ask Charlie about the best one I saw yet when the original design like that a decent paint job and all that's a pretty decent motorized bike you got going there
@GarrettChumchalАй бұрын
@@davidotto7666 hey thank you very much! It was a fun project and more fun to drive around on!
@kerrypinkstaff8532Ай бұрын
That John Deere got a daisy duke shorts maker and a tail bone relocater ❤ nice build .
@AllSoWavyReeseАй бұрын
Can i work if I have a Reddot on my 856?
@GarrettChumchalАй бұрын
@@AllSoWavyReese I believe so. You can also use a Dremel to cut the gap a tiny wider around the red dot if needed but I think it would work
@Bubbaomw2 ай бұрын
Top speed?
@GarrettChumchal2 ай бұрын
@@Bubbaomw with speedometer I’ve hit 49.8mph but believe I’ve gone faster without a speedometer equipped. That’s with the 18 pound springs
@staceycarpenter31072 ай бұрын
I Love my g3c 40 and 9. I fill the mags i just had to clean them lube them then put them back together . I also took a scotch bright pad to the slide made it look sweet