Unfortunately, you're right. The older a knife gets, the pricier it becomes. Especially when it's a hyped-up model
@CNYKnifeNut11 сағат бұрын
Just like with all Demko designs, somewhere underneath all the over engineering is (probably) a great knife.
@winterbladeco3 күн бұрын
Looking good! 🔥🙏🤗
@Mesmerizing_dogma2 күн бұрын
@@winterbladeco thank you! Hoping to score something on your upcoming drop
@winterbladeco2 күн бұрын
@@Mesmerizing_dogma Thank you too! :)
@muffemod8 күн бұрын
NINGA GABAGOOL
@tjp-re4du9 күн бұрын
silly non video
@podpolovАй бұрын
показав дружині, вона злякалась. Каже нахіба таке страшне робить)))
@Thomas.BolleiroАй бұрын
The blade has to be two-sided. When you plunge it into this stomach, it goes in smoother and quicker. The one bad is just for hunting, cutting up meat and twine
@sawyerdalton1040Ай бұрын
The fact that this isnt spring loaded is diabolical
@Mesmerizing_dogmaАй бұрын
why would it be? There is no flipper tab or thumbstuds to open it
@sawyerdalton1040Ай бұрын
@Mesmerizing_dogma lol looks like the blade alone is 20lbs, ik its not meant for edc but dang opening that has to take some effort😅
@Mesmerizing_dogmaАй бұрын
@@sawyerdalton1040 yeah, it's not that comfortable to open, because you must avoid putting lockbar pressure. Plus it's not broken in yet but yeah, this knife is a display piece only
@jaytay79892 ай бұрын
I JUST bought one from a dealer on Amazon and the knife action is so stiff you can’t flick it open or close in one motion or with one hand.
@Mesmerizing_dogma2 ай бұрын
@@jaytay7989 yeah, mine had a pretty considerable lock stick and great action
@jaytay79892 ай бұрын
@@Mesmerizing_dogma , what did you do? Did you leave it? Return it? Adjust the pivot screws?
@Mesmerizing_dogma2 ай бұрын
@@jaytay7989 disassembled, polished the surface on the lock that contacts the blade, tuned screws a bit and in the end the lock stick was almost gone
@scumbaggo2 ай бұрын
Ken Onion design? reminds me of a CRKT i had
@allstarsteinman12 ай бұрын
Nice!
@michaelfoster86602 ай бұрын
why do you have a glove on?
@Mesmerizing_dogma2 ай бұрын
@@michaelfoster8660 I don’t wanna leave my fingerprints on the knife, especially when it’s dlc or like that. It looks so gross Plus nails, some might be dirty etc, I wouldn’t want to see that on a video
@alexgloba9.902 ай бұрын
Шаман на максималке
@АлександрКуро3 ай бұрын
Цена?
@Mesmerizing_dogma3 ай бұрын
650$
@manotewongngoen24173 ай бұрын
สวยครับราคาเท่าไรครับ😅
@Mesmerizing_dogma3 ай бұрын
180$ at all retailers
@tjp-re4du9 күн бұрын
@@Mesmerizing_dogma no way that cheap
@d.v.39283 ай бұрын
Coltello veramente bello nella sua semplicita'. L'unica cosa che cambierei e' la forma della clip da tasca. 👍
@Mesmerizing_dogma3 ай бұрын
This pocket clip is common for Les George's knives, basically he puts them on every model he makes. It's pretty functional tbh
@rilemysterr4 ай бұрын
I’d love to see this in the aluminum bronze
@Mesmerizing_dogma4 ай бұрын
there was a drop a few weeks ago with Chad Nichols damascus, don't know about "regular" version dropping
@rilemysterr4 ай бұрын
@@Mesmerizing_dogmait’s the Les George design from carry Commison. Stonewash blade S35-VN steel. They released 3. The anodized green, Damascus and the middle of the road stonewashed blade aluminum bronze
@Mesmerizing_dogma4 ай бұрын
@@rilemysterr the regular I meant alu bronze scales but stonewashed blade. Thanks for the info, I must have missed the drop(
@rilemysterr4 ай бұрын
@@Mesmerizing_dogma hey no problem! Mine should be delivered Wednesday. Keep on, Keepin on!
@Mark-Dibble4 ай бұрын
My favorite edc
@LINF-fd5wo4 ай бұрын
how much😮
@Mesmerizing_dogma4 ай бұрын
276$
@beeferbaron4 ай бұрын
Wow it’s been along time since I seen a chisel grind. Really cool to see one again.
@Mesmerizing_dogma4 ай бұрын
It's basic dagger grind, not a chisel one sorry. Microtech doesn't to chisel grinds at least on their production models
@CosmicJhana4444 ай бұрын
You got one of the best looking Atom models out there! The merlot and titanium lizard skin are tops.
@Pan-boyLandoSoychildDongLover5 ай бұрын
Got one just like it
@YANGJI_lol5 ай бұрын
Honestly if the color is a bit darker I’ll consider getting that
@josefhruska15495 ай бұрын
Správný nůž, všestraný.😂
@jorgegentilgentil41225 ай бұрын
Porfa precio y como pido uno
@Mesmerizing_dogma5 ай бұрын
The price is around 380$, I don’t know how you can order it, because apparently you’re from Europe. I’ve used a forwarding service
@jorgegentilgentil41226 ай бұрын
Como conseguir esta navaja
@Mesmerizing_dogma6 ай бұрын
As of right now, it’s out of stock everywhere. The only way is secondary market
@jorgegentilgentil41225 ай бұрын
Español @@Mesmerizing_dogma
@josefhruska15496 ай бұрын
Perfektní bojový. nůž.😂
@anti-vata6 ай бұрын
Very nice
@josefhruska15496 ай бұрын
Prima na EDC.😂
@scottwilliams83347 ай бұрын
That's a hunk of knife !
@deutschyt93687 ай бұрын
I finally got one and love mine. Great action but a good amount of blade play when deployed. $600 with tax is pretty steep, not sure why it costs so much more than an ultratech?
@Mesmerizing_dogma7 ай бұрын
The Scarab has always been like the top OTF in Microtech's lineup. Microtech managed to keep the prices the same or even lower with these new releases, it's a hefty sum nonetheless, but still, great to see that.
@nommag7 ай бұрын
With mine - the initial detent is so firm. It is impossible to flick open with one finger. Do you think this will break in? Or should I return it because it is faulty?
@Mesmerizing_dogma7 ай бұрын
Mine definitely had a strong detent, however it opened hard with my thumb. It’s very sensitive to lock bar pressure, I had adjusted my fingers position several times before I figured how to place them properly Try also reverse flicking, if it’s all right, then you don’t need to worry
@EricKarlin8 ай бұрын
🔥
@robertkain78908 ай бұрын
I can't tell you how pleased and relieved I am that you posted this video of your Scarab II Gen. III! I purchased one last week and received it last Friday (02/02/2024). As I familiarized myself with my new Microtech, I noticed small differences between my new Scarab and others I'd seen on KZbin and on many different websites. The thing that concerned me most (almost to the point of worrying that I'd received a counterfeit) was the absence of a production date or any other information on the pocket clip. Only a laser engraving of a scarab on the clip and minimal information on the blade itself. Having just seen yours, however, my mind is now at ease! Thank you for posting your video!!
@Mesmerizing_dogma8 ай бұрын
That's nice to hear man! Appreciate. Congratulation on your recent purchase, I'm loving my Scarab, probably the only OTF that I'll ever need
@robertkain78908 ай бұрын
@Mesmerizing_dogma IKR!! I mean, I already have a respectable otf collection (a Combat Troodon Hellhound, a full size Ultratech, 2 Guardian Tactical Recon-040's, a Kershaw Livewire, and now, at long last, a Scarab! I think it's quite possibly the easiest firing otf I've ever held! Considering 3 other otf's in my collection are impressively easy to fire, that's saying something! But above all of that, I can confidently say that it has the least amount of blade play than any of my other otf's! It may not be a G&G Hawk Deadlock, but it's close enough for me!!!
@garycapozzola8 ай бұрын
Just got mine and it is awesome!
@Mesmerizing_dogma8 ай бұрын
Can't agree more. Will probably grab one when there's gonna be another restock
@ndrea668 ай бұрын
😊Good morning. Always offer interesting knives. Are you a seller? do you have a shop? Congrats on your choices. Greetings from Milan 🇮🇹
@Mesmerizing_dogma8 ай бұрын
More like a hobby for me. Showcasing what I can get in my hands) Stay tuned for more interesting knives=)
@ndrea668 ай бұрын
Good sunday 😊.Microtech it's always a guarantee. They make great knives, thanks for featuring them. Greetings from Italy 🇮🇹
@Mesmerizing_dogma8 ай бұрын
Never handled one bad model from them.
@samxiao53928 ай бұрын
Hello, where did you buy it? received it so quickly. I preorder this and am still waiting for delivery.
@Mesmerizing_dogma8 ай бұрын
It was bought I think on knifeworks, around 2 weeks ago, then shipped to me overseas.
@ndrea668 ай бұрын
😊good morning ... you always have nice knives to show off. Well done. greetings from Milan 🇮🇹
@Mesmerizing_dogma8 ай бұрын
Thanks for your support) Many more to come
@josefhruska15498 ай бұрын
Parádní nůž.😂
@josefhruska15499 ай бұрын
Nema chybu.
@ndrea669 ай бұрын
😊👋🏻this is my dream... and it will come true soon 😉
@ndrea669 ай бұрын
Good morning😊... Hinderer is a guarantee of success. Greetings from Italy, Happy New Year 👋🏻
@Mesmerizing_dogma9 ай бұрын
Appreciate your kind words) Happy New Year too🙂
@ndrea669 ай бұрын
Good morning and happy Sunday, certainly a beautiful blade, very robust and reinforced at the tip. Is the handle titanium or steel? Greetings from Italy 🇮🇹
@Mesmerizing_dogma9 ай бұрын
Aluminum handle
@ndrea6610 ай бұрын
Greetings from Italy😊👋🏻... you always have beautiful vaults. I have a model from Terzuola in collaboration with Fox, and it is beautiful. titanium handle. But are you a cutler? vwndi knives? Greetings from Milan 👍🏻😉
@Mesmerizing_dogma10 ай бұрын
Just showcasing the knives that I can get in my hands)
@ndrea6610 ай бұрын
@@Mesmerizing_dogma Congratulations and lucky to have them
@ndrea6610 ай бұрын
😊hey friend, hi... good evening. beautiful Microtech... beautiful color and nice shot, congratulations for the models you show.Greetings from Italy 🇮🇹
@SonsoftheRevolution177610 ай бұрын
I wonder how many they made I just won one.
@Mesmerizing_dogma10 ай бұрын
Probably enough for the show and even more for the retailers
@ndrea6611 ай бұрын
😊good morning from Italy. Always present beautiful knives, congratulations. I don't like many Spiderco models with FRN handles, but this one is exceptional!!! Well done. greetings from Milan 🇮🇹