@drewwalker9542 mustang stock headers and going to have rest of pipes made
@dadillac42018 күн бұрын
I taught myself to weld with KZbin University and my Clarke 130EN I got for $50. Traded that for a trailer, sold it for $950 and got myself the welder I REALLY wanted, the Omnipro 220. Got it for an unbelievable $650, and it was unopened. Best $50 investment of my life!
@dkj2237Ай бұрын
Wow should have looked into this kit.... bought all mine at a local Harms Fasteners Best thing to do is new hardware when doing a build like this great tip
@eileeno4624Ай бұрын
Doing a great job. And its awesome you will have a record of the process.
@travisschoenborn27052 ай бұрын
Binge Builds I though your nickname was sideways????
@foxbmd154 ай бұрын
You can also hook the TIG gas to the spool gas spot on the front and it works perfect push the pedal and gas comes on let off and gas turns off no more manual valve on torch just leave it open and gas works like it should
@gerardfenn39884 ай бұрын
Please Don't Use Rap-TAR-liner.. Don't cop out for the bed. Paint it. Raptarliner is a Lazy Man's Fix Solution. That rig has a lot of value. Do it like the factory OEM. Paint is best. It tells people that you took the time to do it right. Can't you imagine what the bed would look like with a fresh spray of paint? I wish they never invented that junk. It takes so much away from what a truck could look like. Best Wishes whatever you choose. It's just my opinion. Great Truck for sure.
@Grant74 ай бұрын
It’s coming along great… keep up the good work
@plebeian_egalitarian4 ай бұрын
Gobbless yous hoss
@rogerpowers38914 ай бұрын
What vehicle you working on?
@danielsplayhouse38047 ай бұрын
I bought a primeweld Tig 225x for 800 to my house and I can do aluminum welding
@johndunn98197 ай бұрын
Wow, that just reminded me, I think there's a fat 🪳 in that cubby.
@closeenoughmechanics9 ай бұрын
Just hope for no shorts in the taillight wiring with gas fumes coming out of fuel neck. Not only when you’re fueling it, but as you’re driving it. Hope she’s sealed good!
@jacobnorth86429 ай бұрын
Why??! Lots of effort and hacking for??...
@ronindebeatrice9 ай бұрын
I didn't realize I wanted to do this... I have a 3rd gen ranger though, so my taillight is enormous.
@pleasantvalley989810 ай бұрын
THIS IS GLORIOUS THANK YOU!!im a GTAW *safe travels from Cleveland Ohio!*
@josegalindo1262 Жыл бұрын
Is this thing better than Hobart
@rostrander73 Жыл бұрын
I had an older Hobart like this better
@speedracer12695 Жыл бұрын
Thank you for the informative video
@mikebottorff593 Жыл бұрын
Junk in the trunk compartment haha yesss thank you 😂
@moejr14 Жыл бұрын
Can you weld mig with argon
@flipinfloridafishing2189 Жыл бұрын
Fuck sake no wayyyyy
@jakeowens1770 Жыл бұрын
Nobody talk about that it doesn't take 33lb mig wire
@bingebuilds Жыл бұрын
Neighter does the miller multimatic 220 acdc
@DerekDavis-ip8bq Жыл бұрын
I've had this same welder for a few years and never knew this...
@Agustin-jo8mv Жыл бұрын
Omg never knew that secret! 😂😂 just bought one used with a tank, and vulcan helmet, cart, 95cf owner tank welder $900. 👌
@HalfMoonCustoms Жыл бұрын
It looks like you have some nice parts collected there. That should be fun to see it built.
@ironbell Жыл бұрын
Hey man did it bolt up?
@bingebuilds Жыл бұрын
I have seen good fitting hoods but I did not do this one
@michaelthompson9127 Жыл бұрын
wtf never knew about that compartment 3+years of using it. Huh
@TheFalconJetDriver Жыл бұрын
How about that! I have owned mine for 3 years and just learned about the trunk cool!😁🛫
@STACKDIMES Жыл бұрын
Ur freaking kidding me...🤯 I've owned mine for two and a half years
@mj9valencia Жыл бұрын
Oh hell yeah, I never knew, shit I'm gonna go get me a second one just because of that little stash box 🤪
@tbhbigabus2 жыл бұрын
Nice!!!
@tthack842 жыл бұрын
What is the pitch on your roof?
@rjr42932 жыл бұрын
Did you send it in and did the new one come dent free?
@marvbush55922 жыл бұрын
I used this exact machine in a major factory .. it handled everything with no real issue.
@marvbush55922 жыл бұрын
Everything takes practice. This is a beautiful welder for the money
@devinmanderson2 жыл бұрын
I grab one about 18months ago runs great I got everything tig set up foot pedal spool gun and a flow meter all for under 2k out the door. Overall not bad good deal for the cost its a tough machine pushed it really hard. So far it's still alive. Also its lived outside or the a truck bed since I got it. What I dont like....its burns 7018 kinda weird and hard to start but gets it done also the mig gun is junk it's good for a what it is but I put a better mig gun on it from my praxair supply house. The only machine in this class I'd pick over it is the esab rebel 205 ic ac/dc. Only because the esab can do ac tig and has HF start.
@WoodCutr1 Жыл бұрын
how does the lift start work with a foot pedal? I assume give it some pedal, strike like a match and let off the pedal to stop welding?
@devinmanderson Жыл бұрын
@zinanwattstreeguy well tbh I haven't used the tig side yet but I do have alot of experience with scratch start tig so it should function Ina similar fashion maybe without the stretching motion. I got it as a solid mig box but having the added features is a bonus when im not always able to get my big lincoln diesel machine to a job. But I ran .045 solid wire the other day welding up 1/2 plate and I'll be damned it did it. I did pre heat ans run multiple passes to just be safe but this thing chooches.
@WoodCutr1 Жыл бұрын
@@devinmanderson I got one a few months ago and friggen love it, bought a titanium plasma 45 yesterday to compliment it So far only done stick and fcaw-s with it, it chooches, soon enough I'm going to build a cart for the 2 machines, so far so good although I'm still skeptical since it is harbor freight after all
@chrisswarner21572 жыл бұрын
I noticed that too 😂
@tthack842 жыл бұрын
Beautiful truck
@xXDannySilvaXx2 жыл бұрын
no way lulz.... i did not know that wow
@JMRRebuilders2 жыл бұрын
Bueno this. Really unfortunate.
@carldalsasso86032 жыл бұрын
I couldn't believe you, I've had mine for lil over 3years, and never noticed that compartment 😅 ran right out to garage to see for myself 😆
@brianroselli2292 жыл бұрын
Dam never new
@emirmartinez23302 жыл бұрын
I've been having mine for 2 years as well and i never saw that little compartment jaja
@daudfw84402 жыл бұрын
Bit overwhelming living in townhouse being overlooked by hOA
@tomostrander4833 жыл бұрын
I could have taken it to work and reamed it out..
@onenblue3 жыл бұрын
Yep no one showed it but you I have watched alot of videos haven't seen it thanks Forest
@ocd70363 жыл бұрын
Unbelievable had the thing for 3 years never New that thanks 👍
@bospradlin28823 жыл бұрын
Bought the omnipro 220 found out it it didn't have high frequency start so even with the foot pedal the tig was scratch start 🤬 took the welder back to local harbor freight and traded for the protig 205 that welder does not disappoint even on 110 it welds damn good but with 220 its a beast