raiden5254 no worries I have a few more in the works! I also like the design of the chassis it’s very small lightweight and compact, but the material used could be better. I also should have mentioned that the AA trigger and Laylax trigger probably won’t fit either with there boxy design… The only other one that looks like it could most likely fit as well is the flux trigger. Agreed not completely vsr compatible but the Tridos tdc 2.0 install worked no issues even with the VSR One outer barrel being proprietary

@MyWhyGuyShorts this isn’t my personal build, I just helped him with the npas. As long as you have the correct barrel nut you’ll be set. I don’t know which one he went with

raiden5254 definitely is solid and had great performance when I went to test it out

@ I have two Jurassic builds and they are my favorite. I also enjoyed how easy it was to set everything up.

I agree!

bustomi925 thank you! The stock/chassis is a silo ssg-50 compatible with VSR platforms

raiden5254 no worries I’m excited to hopefully bring in even more barrels for different platforms in the future! Everyone who picked up parts in 2024 helped contribute as well so thank you too 🙏

raiden5254 thank you! Yes it is! I haven’t made many changes to it recently, but will make a bucking swap soon when I go to clean it whenever that happens. Hopefully the noir buckings are still running well in your builds!

raiden5254 I appreciate you! You definitely won’t be disappointed in the upcoming parts drop! Things started slow but have picked up the past couple months, I’m hoping the shop continues to grow as well! Yea I need to install my Noir yet too! I’ve installed them into everyone else’s but my personal build, I’ve just been busy. But I agree they are a huge improvement

@GhillieTwins thank you 🙏

sickmangaming3021 you should be able to find it on Evike

tannerkoehler236 the only thing you'll need to do is remove the orange tip

@@vrooomarmament I know but the thing is that my orange tip won’t budge

more heat and more torquing just be sure to take out whatever pin or grub screw holding it in place

@SamuelSessions-w1w its made by Matrix I bought the foregrip magholder off of Evike

sleazykilla360 its still a mac 11 tho... Just better lol

Not for the sportline but if you get the proline you can use any vsr 90° trigger like the springer custom s-trigger

@@vrooomarmament Thank you for the answer. The only m40a3 in my country is black sportline. Sadly this one cannot be upgraded on trigger unit which cannot handle higher springs that we use in our country.

@@iampröcs2 no worries. That sucks you can’t have higher limits

@@vrooomarmament Actually i cannot have high powered springs on this replica. Because 45 degree will not handle it for long.

I definitely agree. His hop arm is a decent alternative as well! I think his chasis are pretty cool

I appreciate that! It’s the Tridos tdc 2.0 it makes all the difference!! How are your parts holding up by the way, and how has the performance been?

@@vrooomarmament Everything is working well. I am going to order some springs soon.

Awesome to hear that! And sweet I’ll have those shipped out asap whenever you order

I appreciate the kind words! The plan is for more informative content to the channel and branching away from gameplays… If things start to take off I definitely have some good ideas of parts I want to bring in!

raiden5254 yes I just shipped out your order this morning! Should be there by the end of the week. I have plans to bring a few different options in, but right now this is just the early stages of the shop so it’s hard to tell how things will go moving forward… Eventually that is the goal! I appreciate the support 🤙

Nuke no problem!

OdensJournal2d the community we’ve all come to love 😂

Officermeow916 this isn’t house gamers lol

phoenixhenson3689 unfortunately there isn’t a conversion kit out yet…

naw fr 😭

ryanmanalac7458 😂

Medics are still combatants , if they armed it’s fair game 😂

​@@5.56x45NATOmedics actually do carry guns and it is still a warcrime to shoot them however this only applys if they are wearing a clear insignia showing that they are a medic making this not a war crime

@@5.56x45NATOif they use their weapon they are fair game, if they don’t fire then it is a war crime, in airsoft however, unless the game rules dictate otherwise they are fair game weather they shot their weapon or not

LotsOfOutdoors the best colors are anything light in color. Anything too dark or bright won’t show up

alfonsonoriega8086 you have to buy it as a kit

snipernoobcodm7054 yes I’d definitely recommend getting the aap01 over it. And if you loook in the right place it should only cost you an extra $50

SiliconeSword 🤙 whenever you’re ready to talk about bringing some of your custom parts in let me know!

nitrxgaming5555 I appreciate it dude 👍 all you can do is try

stuffwithdono9304 check out emperion airsoft

@@vrooomarmament appreciate it!

SpaceDuck-et5kz it is not, it is Tokyo Marui vsr spec

mr.untragard 2.7 joules

😂😂😂

Gotta love a two point sling! I find it more comfortable and user friendly

EMAGlife I’m down to go just let me know when you wanna go

EMAGlife it is what it is

patrickbateman3070Ti yes they’re identical to my real Glock 17 gen 3. I love the grip as well as the iron sights over the Glock 17 gen 5

Fatgunner no I do not. I recommend upgrading the inner barrel and bucking though

Kyrantula there’s a part two to this series and it goes into the performance of the build and shows what it chrono’s at

Thats great thank you!@@vrooomarmament

Blind Sniper right and its not like this gbb was shooting hot its hitting a bit over 300 fps 😂

mantissniper7571 I agree hopefully someone can make one in the future! But the barrel length definitely helps. I’ll have more videos going more in depth with the build soon just been busy lately

Instinct3000x It’s definitely a solid field!

@@vrooomarmament you should look into mir tactical. Especially their sheboygan falls asylum milsim. Like 3 blocks from my house. It's something to look into. I have a few clips on my channel under gameplay if you want to look

WarfighterGroupMilSim thank you 🙏 I absolutely love it. Don’t get me wrong tho it has its flaws, and needed some extra work. But once I was able to get it up and running. It’s been great. Super durable and lightweight. Lots of room for customization and overall I’m happy with it! I would recommend it to someone who is able to tech, just because it is not an out of the box ready to go stock… I should probably do a full review on it now that I think about it 😂

ReepS506 lol you’re definitely right. I mean all of the parts are for a vsr 10 so technically it is still a vsr 10 platform. Thats what is fun about vsr’s, you can swap everything on it to your choice of parts!

oscargzz9101 yes they are!

tyler1768 the suppressor I use is the stock one it comes with out of the box. It has been modified with foam and front flaps to reduce the noise. There are not any adapters for the mac, you would need an aftermarket outer barrel with threads to switch the suppressor. And the light on it is a streamlight hl-x. Hope that is helpful!

@@vrooomarmament how did you attach light

I applied a cement adhesive and attached the rail to the side of the upper

I was thinking of doing that but on the suppressor when I get one and a shotgun laser sight that projects a eight dot circle and one in center the circle enlarges one inch every yard ten yards 10 inch circle 20 yards s 20 inch etc. jb weld a pic rail on to suppresor so light and laser further out with out suppresor blocking beam.

buddah1017 thats good to hear! I may make more like this in the future. I’ve got some ideas in the works