7 ай бұрын
9 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@BarryWaltemath-j7k Сағат бұрын
Mary Inlet
@keepin_it_reel_fl6992 16 сағат бұрын
Hey boss man I had a question 🙋♂️ I wanted to do this to my 2010 g37 sedan what all would I need ? Can you point me in the right direction?
@wade_debo 7 сағат бұрын
Sikky manufacturing makes a kit for the g37 as well you can get the entire kit and everything needed from them !
@keepin_it_reel_fl6992 5 сағат бұрын
@@wade_debo thank you boss
@ThoreauHayden-s3k Күн бұрын
Torey Station
@colincampbell7980 10 күн бұрын
Hi Wade, can you recommend a good shop that can rebuild a V161 transmission here in canada. Ive spoken to Jacks Transmission and its crazy expensive. Also what transmission are you running. I would love you to take a look at my car :)
@wade_debo 7 сағат бұрын
Hello ! I can’t say I know any places that work with the v160 or v161. I am running a t56 magnum in my car !
@ryanmcburrows8051 11 күн бұрын
Does this still have air-conditioning?
@wade_debo 7 сағат бұрын
Has hookups ready for lines just haven’t installed it yet in my area it doesn’t get smoking hot usually!
@dickieroberson4191 16 күн бұрын
What did you do to make all the guages work...was it in your harness
@wade_debo 15 күн бұрын
Wirring specialties uses a canbus module box to communicate with all dash lights and gauges !
@henoccharlot708 19 күн бұрын
Was this naturally aspirated ? Or was it turbo’d ?
@wade_debo 19 күн бұрын
@@henoccharlot708 this is Naturally aspirated
@henoccharlot708 19 күн бұрын
@@wade_debo how much horsepower it made (including after it got tuned which I’m assuming you took it to a dyno cuz you seem pretty professional)
@henoccharlot708 19 күн бұрын
@@wade_debo & thanks for replying it helps alot with researching
@wade_debo 19 күн бұрын
@@henoccharlot708 there is a video on the dyno you can see the numbers there if you like ! I just tuned it right away I didn’t do a before and after due to everything being swapped and then straight to street tune then dyno tune.
@wade_debo 19 күн бұрын
@@henoccharlot708 no problem!
@adrianl6754 24 күн бұрын
that swap and exhaust work is mint
@wade_debo 24 күн бұрын
@@adrianl6754 thanks ! Yea it turned out great
@apollomotivation7492 Ай бұрын
When doing the swap do you keep the same suspension or you have to modify something on it for the swap ?
@wade_debo Ай бұрын
@@apollomotivation7492 keep the same suspension the weight of the new engine isn’t much off the stock v6 that was in it !
@Revonemedia Ай бұрын
Came across your video and was wondering if there’s anyway I can reach you for a one on one. I had some questions about how to retain body control functionality with the LS swap. Thanks In advance
@wade_debo Ай бұрын
For sure you can DM me on instagram if you like it’s wade_debo
@Revonemedia Ай бұрын
@@wade_debo thanks for the response!
@jellofuel Ай бұрын
When you mentioned the cams & headers maxing out the VQ, I felt that. lmao. I'm playing that game still, if my DE blows again, I'll either part out or just VHR swap now that swap kits made it easier
@wade_debo Ай бұрын
@@jellofuel for sure ! Like I said to nothing wrong with the vq just gets to a point where you really gotta build them to get some good power with boost and such ! I wonder how nice the kits are for VHR are. How involved it is to
@MohammadAbdullah-gs9qn Ай бұрын
Nice build .. hope u enjoy it ... Just wondering which cai did you get... i'm planing to do the same
@wade_debo Ай бұрын
@@MohammadAbdullah-gs9qn that cold air came with the sikky kit !
@NO_CLASS_BEATS Ай бұрын
Me want. I'll trade you for an all original (even the tires and brakes) Lemans sunset with burnt orange interior with 42,000 Km. Documented 1 of the 1st 350zees sold in North America. Performance package Bose, 18# rims. Came with lots of stuff like a hard cover book on the history of the Z cars, postcards, a letter, and a dvd. Only driven in rain 3-4 times. Can eat off every part and finally not even any sun swirls in the paint. Almost Barrett Jackson perfect.
@NO_CLASS_BEATS Ай бұрын
2003. I bought it used with 5000 Km in 2004. Garage kept and covered. I probably have more hours into washing than driving hours. Of course it is highway miles
@fritzmckellar1756 Ай бұрын
I'm running a 2.76 R200 out of a Infiniti Q45 on my 350z. Pairs up perfectly with a Quaif LSD for 350z auto (no half stub change required). You only need to swap the driveshaft flange over to bolt right up. 20% taller gearing, 120kph in my 350z is now just under 2100 RPM.
@wade_debo Ай бұрын
@@fritzmckellar1756 thank you ! This is great info !
@NO_CLASS_BEATS Ай бұрын
Wait was that a muscle car ?
@NO_CLASS_BEATS Ай бұрын
WOW! I want it!!
@brendenmills8856 Ай бұрын
do you have a motordyne exhaust on that?
@wade_debo Ай бұрын
Yes I do ‘ I custom made a lot of it tho added in some mufflers and paired it with my own setup from the middle of the car back.
@colincampbell7980 Ай бұрын
Hi Wade, i have a is250 with a 2jzgte, where do you go for dyno tuning, im also in ontario
@wade_debo Ай бұрын
So I use Lawrence shipman for my tuning ! He is the 2jz god he remotes in for me and I rent a dyno from CCP in Kitchener area. You can rent any dyno really as long as you coordinate your tuner and dyno people !
@Popsm0ke Ай бұрын
Man that's nice!!! ...what do you think is the cheapest it would cost to drop ls in and run . Only reason I wanna cheap-out is I have an auto-immune neurological central nervous system disease that can take me out at anytime . So I wanna have fun now while I can...thanks to whoever has some advice...I've already searched google, evidently I'm not asking right
@wade_debo Ай бұрын
You could probably get it done between 5 and 10 grand depending on what parts you use !
@Popsm0ke Ай бұрын
@wade_debo ....Thank you for your reply .....if have a minute can you answer a few more questions? If so i sure appreciate it ......I already have a L92 and ecu out of a wrecked denali and a t56....taking that into consideration how much you reckon it would cost and what exactly do I need just to get it rolling and communicating with the gages in the car.
@MuscleTile Ай бұрын
Man. I may have to pay you to do this someday for my Z.
@wade_debo Ай бұрын
I would love to help with that !
@Rev8 Ай бұрын
Which song from Beats Provider did you use here? its really good
@alaniz.3475 2 ай бұрын
I like how you put a 6.2 badge on the side lol 😂. Gotta let them know whats up.
@wade_debo Ай бұрын
Ahah yes exactly !
@xTxShinaGamixTx 2 ай бұрын
So no A/c? lol Hell nah lol
@wade_debo 2 ай бұрын
Lines are ready to be hooked up with a compressor just not crazy hot in my area ! Or I would be installing that right away lol
@xTxShinaGamixTx 2 ай бұрын
@@wade_debo I got you lol I’m in Texas. We need a/c
@wade_debo 2 ай бұрын
@@xTxShinaGamixTx I don’t doubt it ! She would be a hot one out that way !
@amarionkj 2 ай бұрын
I was Finna Ls swap my very I thought I’d be the only one ig not 😂
@Dansyoung 2 ай бұрын
Cool build I am doing a build with similar intentions in a Mazda rx8. LS3, T56 magnum, ford 8.8 with 3.73 gears. It really is impressive that the cd009 can take that kind of abuse! A t56 magnum was around $4500 CAD, but then you need to change your driveshaft, change the shifter, get a new clutch, get a bell housing etc definitely can add up
@wade_debo 2 ай бұрын
Oh for sure that’s why I’m a little hesitant to make the switch to t56 since the trans feels very close to oem in the car despite the shifter being pretty close it drives like it used it with the v6 in it cruising and such. I would probably switch the rear end before anything for longer gear choice !
@RavenGTR79 2 ай бұрын
Can an ac compressor be installed or would that complicate things? I live in Dallas and Satan is acting like he's a teabagging Magma Slug🔥🔥🔥🔥🔥🔥🔥🔥🔥🐌
@wade_debo 2 ай бұрын
For sure it can ! I just didn’t have it in mind at the time I have it prepped for it tho ! It’s not to hot in my area I’m more of a windows down drive and cruise kind !
@RavenGTR79 2 ай бұрын
@wade_debo good to know cause it's not getting any cooler in Texas. I'm thinking about getting a sedan like a G35/37 so I can keep the wife happy as I already have a 1991 Toyota MR2 😁but who says sedans have to be boring 😂😂😂
@Bolt_theG35 2 ай бұрын
Whoaaa.. they make hood struts for the G? How did I not know that? Off to Z1 I go
@wade_debo 2 ай бұрын
You bet ! It’s a must better then bumping into the prop rod every time with your head lol 😂
@Bolt_theG35 2 ай бұрын
@@wade_debo most definitely. I bought them about 5 minutes later after I posted this lol.
@Justcuts04 2 ай бұрын
What pads and rosters did you use
@wade_debo 2 ай бұрын
They are all from z1 motorsports!
@RuntzAHK 2 ай бұрын
Did you have to upgrade your alternator with this set up ? And or did you notice any power loss !?
@wade_debo 2 ай бұрын
No the stock alternator is good it’s not gonna be for competition by any means for sound systems but it will give what you need or really what your ears can handle for power! lol
@raydernole9582 2 ай бұрын
Bro you killed it my favorite car of all time
@wade_debo 2 ай бұрын
Thank you !
@robotexplorer 2 ай бұрын
would be funny to change the badge to a 620Z
@wade_debo 2 ай бұрын
Love it !
@ssjdavid 2 ай бұрын
Bro you remind me of Paul walker for some reason bro much love
@wade_debo 2 ай бұрын
Ahaha I love hearing that, a few people have mentioned that in the comments ! Thanks for watching 🤝
@ssjdavid 2 ай бұрын
@@wade_debo only when your in the zone doing pulls though haha you look super enthusiastic
@ssjdavid 2 ай бұрын
How much would one of these run? Sell me yours
@wade_debo 2 ай бұрын
Depends the quality of the build and how good of shape the car is ! I would say mine is very clean low km and done right in my opinion I would sell for 55,000 or 60,000 it’s immaculate condition under and on paint.
@francelopes7110 2 ай бұрын
Hello, one question, I have a 2003 Nissan 350z to put an engine like this in it and I need a lot of modifications or is it simple
@wade_debo 2 ай бұрын
If you have some knowledge of working on cars I would say this would be not a hard job it’s mainly just making sure everything lines up properly and things are routed properly and away from heat to reduce the risk of a fire or melting things.
@jonshellmusic 2 ай бұрын
Good thing you were in "Mexico" for all that driving!
@wade_debo 2 ай бұрын
Absolutely
@paulohinton9481 2 ай бұрын
Will the 350z get a LSA blower?
@wade_debo 2 ай бұрын
I’m thinking that’s a good idea !
@roadrat33 2 ай бұрын
You've done some awesome work here! Clean n' classy sleeper, minus the exhaust note(in a good way ;) ).
@wade_debo 2 ай бұрын
Thank you ! Ahah yes stock 350z until you hear it idle and the side badge that’s about it lol
@joshrooney1516 3 ай бұрын
🚀
@quintonboles2429 3 ай бұрын
didn't know Mexico was so green 😉🔥
@wade_debo 3 ай бұрын
lol yea lately it’s been pretty fresh with nice greenery lol
@enrique6057 3 ай бұрын
What engine management and harness ?
@wade_debo 3 ай бұрын
Using ECU master black and Kaizen motorsports harness !
@240motorsports2 3 ай бұрын
Nice LS swap 350z! Good job! Question about the SerialNine shifter. Is it worth the money? Can you WOT power shift it into 3rd?
@wade_debo 3 ай бұрын
It’s a good setup shifter, it is tight and very easy to money shift if your not use to it. But it does the trick I’m sure there is lots of others that have a bit more throw to them so it’s less likely to miss a gear.
@240motorsports2 3 ай бұрын
@@wade_debo Thats great to hear. I just ordered it for my drift car. I have money shifted other brands too. My issue is I break the handles off at the bases. Where the bolt hold the handle to the base. Ive broke the stock, 2 b&m and 1 Mazworx in the same spot. All on WOT 2-3 powershifts drifting. Your video and comments helped me decide. Thank you
@07wrxtr1 3 ай бұрын
I think Z1 can get you a wavetrac with a custom final drive ratio = more power to the ground less wheel spin and will allow better use of all that low end tq!! I love that you kept it stock n basic looking = classy!
@wade_debo 3 ай бұрын
I have looked into that ! Definitely an option ! Thanks for noticing the classy look I went for !
@elwinavalos633 3 ай бұрын
Can this setup work on my 2008 g37?
@wade_debo 3 ай бұрын
I believe they make a very similar kit for it I’m sure it would be very similar setup and process!
@elwinavalos633 3 ай бұрын
@@wade_debo is there a website where I can get the kit
@jimmytedrow4146 3 ай бұрын
Nice cars ain't cheap and cheap cars ain't nice! Beautiful ride well done 👏🏼
@wade_debo 3 ай бұрын
Thank you ! 😎
@BlinkkHD 3 ай бұрын
Im working on my swap and now and its very difficult to get into 1st and second gear. Also just moving the shifter in neutral is difficult, when i move it to far right i can see the reverse lockout on shifter rotate clockwise, and when i push it left it rotates counterclockwise. Any ideas whats happening?
@wade_debo 3 ай бұрын
Sounds like maybe the clutch isn’t disengaging properly? It’s hard to say with it not in front of me ! I know it is tough to shift after installing that tight serialnine shifter.
@BlinkkHD 3 ай бұрын
@wade_debo I was able to get it into all gears easily however it's still rotating not sure why and if I should even be worried about it. Lol I just want to drive it again
@samhendren1171 3 ай бұрын
What about t56 ford rear end? Isn't that common?
@samhendren1171 3 ай бұрын
BTW, your build is immaculate. I really agree, EVERYTHING working like stock would be the biggest deal for me too.
@samhendren1171 3 ай бұрын
Last thing I'll say. HAVE YOU CONSIDERED A GATED SHIFTER? MIGHT BE SICK WITH YOUR BUILD AND HELP THE FEAR OF MONEY SHIFTING. KEEP IT MANUAL THOUGH
@wade_debo 3 ай бұрын
Thank you !
@wade_debo 3 ай бұрын
Yea there is a few options out there ! May switch to a t56 in the future as well. Haven’t decided yet !
@mattbolger16 3 ай бұрын
Wades Garage just spitting straight facts in this video @ 5:00. Friends helping friends out of the good of their heart without expecting anything in return, nothing better in life! #dailywadewisdom
@wade_debo 3 ай бұрын
Should dailywadewisdom be a thing in the videos ? Ahaha thanks for the great comment. 🤝 more people need to see this !
@michaelgiovinazzo3598 3 ай бұрын
Hey Wade, you should tell your friendly neighborhood woodworker that your desk needs a lift kit now. Great videos 👍
@wade_debo 3 ай бұрын
Aha absolutely! Thanks 🙏 👍
@0ckgobananas 3 ай бұрын
The nismo kit on this would go hard
@wade_debo 3 ай бұрын
I do agree I love the nismo body style. The rear bumper on them is awesome !
@johnmifsud8132 3 ай бұрын
Dude that’s incredible! Nice work on the new pimped out garage. Friends helping friends - that’s what it’s all about & nobody keeps score. Great video!
@wade_debo 3 ай бұрын
Thanks buddy ! Appreciate that ! 🤝