Just got my box for my Gen 3. I’m using this video to help set up. 😎🛰️
@saltysailormike14 күн бұрын
Just got my box for my Gen 3!
@saltysailormike14 күн бұрын
Just got my box for my Gen 3!
@krismartel324020 күн бұрын
Are the external ethernet ports shielded? Also if you run the case closed with dish outside are you fine for the heat buildup or do you still have the 2 hour max warning?
@savageutv20 күн бұрын
We carry shielded and unshielded cables. Just depends on what you prefer. The heat concerns are when the actual dish is inside the case. We have seen temps well below Starlinks recommended temps inside the case with just the router and power unit operating.
@lloydmarche7263Ай бұрын
Definitely on my list of places to go. Looks amazing. I really like the xpedition , I would get the 2 door model . Currently running a can am defender which is a great machine also.
@KelleyperformanceАй бұрын
I'm curious, you think a 33/12.50 would rub on these machines?
@savageutvАй бұрын
The 10” wide 33” is rubbing on the front and I’m using a 1.5” spacer. We pulled the trigger on a long travel kit to solve that issue.
@charlielake2614Ай бұрын
So they rub but you don’t know the true measurement of the tire??
@savageutvАй бұрын
Yes, the car is not at our shop right now so I can’t measure them. EFX web site says it measures a true 33” outside.
@charlielake2614Ай бұрын
Do the 33’s measure a true 33 or are they smaller like most
@azgrapefruitАй бұрын
Brilliant solution!
@charlielake26142 ай бұрын
What is the actual measured height of the 33? Do they run true to size or run smaller like most tires?
@FaboLouis2 ай бұрын
What do you set your air pressure at for the trail? Riding in the rocks would be lower, so how low do you go?
@savageutv2 ай бұрын
Our race UTV runs 20 PSI. This Xpedition runs 12-15 depending on terrain we are in. We could go lower with the beadlock wheels but I’ve pinched tires in the past and feel like 12 gets a pretty close result without the risk of tire damage.
@eddymel96572 ай бұрын
Where can order this?
@savageutv2 ай бұрын
www.SavageUTV.com
@PatrickSiddle2 ай бұрын
How do we get the item to install
@savageutv2 ай бұрын
www.SavageUTV.com Go to the off road products page then to the Xpedition page.
@DaylightRobbery832 ай бұрын
Just ordered, can’t wait!
@AndrewPhillips-qp2bq2 ай бұрын
Does the front scrub anywhere
@savageutv2 ай бұрын
Yes, we got a little rubbing on the front end when we started driving more aggressive. We ordered a long travel kit from Thumper Fab to fix the issue.
@bobmac952 ай бұрын
Another question, It looks like they are 33's, do they actually measure 33? Thanks
@charlielake2614Ай бұрын
I’ve been asking the same question with no answer I’m assuming they haven’t measured and they don’t know.
@bobmac952 ай бұрын
How did you like the Motorally tires? I ride in AZ and trying to decide on the KM3 or Motorally. Thanks
@savageutv2 ай бұрын
They are great. I side walled a rock pretty good on this trip and the tire handled it no problem. We run the MotoRally on our Pro R as well. 35”
@gofishgobig2 ай бұрын
Nice to see you guys having fun! 😊 Look forward to seeing your upgrade videos! Nice rig Matt.
@manuelhynesjavier70322 ай бұрын
Cool👍😁🌈🍉🌴🌄🦵break ahh🦵🦜🦈
@ncmach12 ай бұрын
Damn vertical videos
@dmcremona3 ай бұрын
Awesome product. Any concerns with over heating the router if it’s locked in the case while in use?
@savageutv3 ай бұрын
Thanks! We have had great success running our cases with the router inside. We do recommend using our thermal sensor if you are in warmer environments.
@beach60605 ай бұрын
Do you know which case fits the original round starlink?
@savageutv5 ай бұрын
Unfortunately, we do not make a case for the original round dish.
@Dan-Addison-Planespotting6 ай бұрын
hi do u sell the foam separately please? i have the case, starlink but now need the foam as the foam i have is stopping the lid from closing :(
@savageutv6 ай бұрын
Unfortunately, we do not sell the foam on its own.
@Dan-Addison-Planespotting6 ай бұрын
@@savageutv ok what thickness is the foam? Im having issues closing my lid with my starlink in so thinking i need thinner foam
@LeeH-Ranger836 ай бұрын
Does the new Gen 2 (actuator) dish fit in the “On the Go” case?
@savageutv6 ай бұрын
The new dish does not fit in this case but we are working on an updated design for that dish. Standby…
@LeeH-Ranger836 ай бұрын
@@savageutv - thanks for the quick reply. I sent you an email as well from: Lhenry83…
@djepodjepo7 ай бұрын
Flight proof? As check-in luggage
@savageutv7 ай бұрын
We personally and our customers have checked these cases in many times for flights. 👍🏻
@zackeoff41647 ай бұрын
Did he leave the router in the box?
@aussiewonderer7 ай бұрын
Where can I get them cable ports from with the split rubber plug?
@zackeoff41647 ай бұрын
Does the only gold melt that comes with the case have the ability to mount it to a small square roof rack bar? I have an off grid trailers expedition 2.0 and would love to be able to mount it to the roof I believe they are 1 inch crossbars.
@savageutv7 ай бұрын
We have a ton of mounting brackets at our shop and should be able to make one that fits your specific needs. Shoot me an email at [email protected] and send me a pic of what you are wanting to mount it to.
@zackeoff41647 ай бұрын
@@savageutv I will reach out to you guys tomorrow with some pictures and info. Thanks for the response I appreciate it.
@ford6.7s677 ай бұрын
I bought the case for the in motion dish, and I'm very impressed with the quality. Everything is well thought out and accounted for. It's worth every penny for hunting trips.
@junebrooks66510 ай бұрын
would you be able to sell me 1 of these items for my mother home and post to the UK
@familiachavez167410 ай бұрын
Will a turbo r 4 belt fit?
@savageutv10 ай бұрын
Yes! The Turbo R belt fits.
@noyjr949210 ай бұрын
can this be used in motion?
@savageutv7 ай бұрын
Yes, it just depends on how you are using the dish but it is possible and we do it all the time with no issue.
@VETSINCRYPTO11 ай бұрын
There should be an easy link in your videos that directs a person to purchase what was viewed.
@VETSINCRYPTO11 ай бұрын
That’s dope AF!!! BANG BANG ‼️
@energy1of2the3future Жыл бұрын
you can install the antenna inside the box it will work perfectly! I would also put a battery inside the box!
@keepitdialed Жыл бұрын
Want to drop us all a direct link and pin the comment broskies? Thanks and cool AF project you brought to life. Priced at a reasonable amount too.
@ponponpon160 Жыл бұрын
nice case😊
@jrbloggins Жыл бұрын
@10:15 is that an EcoFlow Delta? I plan on running my Starlink off one just like you have here. But DC instead. Nice product!
@keepitdialed Жыл бұрын
Def is a an EcoFlow. Not sure on model. I ran my starlink off the little EcoFlow River v1 (288wh?) via ac and it did great for a good little while. Maybe 4-6 hours I think with some MacBook Pro charging thrown in there
@user-bc2et2ls8t Жыл бұрын
What wire size do you recomend connecting on a rzr?
@savageutv Жыл бұрын
It depends on how long the wire is. Google “choosing the right wire size DC” and there is a great chart showing you how to select the correct gauge.
@michaelstora70 Жыл бұрын
I've always wondered if the signal would work through the case lid.
@savageutv Жыл бұрын
Unfortunately, it does not work.
@Malsaxbythewater Жыл бұрын
Do you have it with European 220 v connectors
@zackhpittman Жыл бұрын
you should add an ethernet port (ip65 rated) to the side of the case, so you can get wired connection from the unit inside the pelican if you leave it all latched inside. Also, if you leave the router inside and mount to the pelican lid, how is heat dissipation on the router?
@savageutv Жыл бұрын
We do offer the Ethernet port as an add on. We also offer a Wi-Fi thermal sensor that will alert you if the router is exceeding the recommended max temp from Starlink of 122F.
@zackhpittman Жыл бұрын
@@savageutv
@zackhpittman Жыл бұрын
@@savageutv awesome. I already placed an order earlier. I can add the port later myself. I can buy the part on mouser. Is the case in stock? I ordered overnight hoping it ships on Monday!
@keepitdialed Жыл бұрын
You guys are ninjas. Dead serious. Freakin love this thing.
@bettertoaster Жыл бұрын
Can I use this with 230v ac and/or 24v dc? What parts need to be replaced, if any?
@savageutv Жыл бұрын
This case is designed to work with the US version of Starlink. The electrical ports will not work if your system is running off of 230V AC or 24V DC.
@kidcool8832 Жыл бұрын
Nice Job 😁
@SXSGuys Жыл бұрын
Another great solution! 😎🤘
@livennick9 Жыл бұрын
Can you fit two belts in the box?
@savageutv Жыл бұрын
Yes, you can fit two belts.
@livennick9 Жыл бұрын
@@savageutv awesome. Thank you
@UltimateAnarchy Жыл бұрын
$400??? Dang. If someone is looking for a cheaper alternative, this one is $40. kzbin.info/www/bejne/d2GvoJt_Z5hpsKc
@chriscamilleri3365 Жыл бұрын
Do you make the "on the go" case with an Australian style power port
@justepic7029 Жыл бұрын
Do you make one for gen 1 starlink?
@drmarkintexas-400 Жыл бұрын
🏆🏆🏆👍🇺🇲🙏 Thank you for sharing
@calebreber47182 жыл бұрын
In the video only polaris and Kawasaki are mentioned. Will this tool kit work for a can am X3 and will a can am X3 belt fit into the case?
@savageutv2 жыл бұрын
Yes, these cases with work with belts from all UTV manufacturers.