you can use any VNC client. I use RealVNC. I just use the client I do not install the server. www.realvnc.com/en/connect/download/viewer/windows/?lai_vid=rAOn1WrnVcly1&lai_sr=10-14&lai_sl=l&lai_p=1

@@alexilaiho8534 thank you my friend. I am glad you found it useful

@@rubenalgotsson807 to measure specific locations you need the outer markers to perform 4 point LSA. To simply it we measure loss using backscatter and there can be noise generated near the event. To help smooth out or reduce this noise we use the outer markers out as far as possible without crossing another event. This ensures that we reduce the impact of noise generated near the event we are measuring. I hope this makes sense.

Hello sir. This is a new error message for me. How long is the span and what kind of connector do you have on the end? UPC or APC? You can also contact our support group at [email protected]

Erik, It should not have done that. Reach out to our support group at [email protected] or 1-866-683-0155 it is free and they should be able to walk you thru it. If you still have issues email me at [email protected]

Robert, You will want to use smartloop back. Or if the SW is fully updated we can respond to the most common third party vendor loop commands such as from Viavi. Give it a try the only thing you will need to make sure is that you have link. Set your port 1 1G electrical and connect it to your network. When you initiate the loop common from the far end unit if its a supported device we will respond to that loop.

@@mthokohlongwane2029 I am glad you liked the video. An OTDR will not test through an EDFA. While some OTDRs will test with an active signal on the line they will not test through an active device.

thank you, Kevin. How would I test using DWDM OTDR from the DWDM line system that has a pre-amplifier and a ROADM?

@@fibre.gelmonkey it absolutely could. If the splice is close it may merge into the reflective event. Great point. I have some customers adding “pigtail splice” as a new event. It’s a reflective event and splice combined

Thanks Kevin.

Hunter I am glad you found this video useful. What you are asking for is a popular request. The uploads from FR and from the test set when not part of a job are what we call AdHoc uploads. They are not associated with any Jobs. If you look at the results tab in Exhcnage you will see Exchange jobs will have a hyperlink to the job but manually uploaded test do not. It is a request I have submitted and will add your name to the list of folks looking for that feature.

Javier which version of the FTB-1 do you have? We have an older model that has buttons on the side and the newer FTB-1 Pro. You can download the install files and instructions from apps.exfo.com/en/exfo-apps you may need to create an account first which is free.

@@Paddy-we1bx hello Patrick. Great name I have a son named Patrick. I recommend at least 100-150 meters. It really depends on the span length. APC connectors often do show non-reflective. Is iloop not identifying the loop correctly ? A longer loop might help but I will have to look into this. Do you have a copy of the trace you can email me ?

Hello. Does it turn on? Do you have the home screen.? If so than go to this site and download the update. You will need a USB stick. Make sure it is plugged in. apps.exfo.com/en/exfo-apps/?platform=MAX-700C/D&platformCategory=Handheld+Units

@@KevinPeres Thank you Kevin, I upgraded it to the last version 3.7 and the software OTDR and IOLM are worked, but when I turn off the device and on it the functions are deleted, and if I turn on it with ac adapter the sofware show me again, it is so strange. If is possible maybe I could send you a video for email?

@@joffreg6178 that is very strange. Email me at [email protected]

Glad you enjoyed it

I am glad!

Thank you sir I am glad you liked it. I say this all the time but I need to do more videos it has been too long

Please email me or support. [email protected] or [email protected]

Thank you sir!

Glad it was helpful!

I am glad you liked it. I did a video on the iOCC the stand alone version the interface is the same. I will dig it up

Found it. kzbin.info/www/bejne/o6OZk32HgMihgNU

No specifically I have done seminars but no short clips I will put it on my long list that I need to eventually :)

I am very happy you found it useful. I need to do more. I keep saying this.

Hello sir. The MAX-715D version

@@KevinPeres thanks

@KevinPeres Sir, we are currently using FTB-2 Pro. Can we know the difference MAX-715D and FTB-2 Pro

Greg I am glad you found it useful. Good luck with your new job!

Thank you

It depends on the OTDR’s dynamic range. Which one do you have ?

@@KevinPeres 730c

Sorry slow to respond I missed this one. It means Request for Comments, which is a document from the Internet Engineering Task Force (IETF) that contains specifications and organizational notes about topics related to the internet and computer networking.

I am glad you liked my video. Can you show me the template that you want ? You can email me at [email protected] If you want a report similar to the OLTS. When in Fast Reporter 3. Go to report and select Application Report.

@@KevinPeres Thanks Kevin

Fast Reporter 3 will open SOR files but sometimes there will be some anomalies. While SOR are a "standards" based format there is some wiggle room for some of it that each vendor may interpret differently. We try to build support and work around where we can but we are often limited. For example many third part SOR we will not re-analyze because of this. If you go to the OTDR tab and select Import this will allow you to import in some SOR files that do not meet Bellcore compliance or there is something we needed to adjust. For example some Viavi traces reference out the launch and the launch connector differently so when you import them we will adjust to that. It is not perfect and sometimes you will see some differences. It is always important to compare what the results look like in the test set or from a report pulled from the test set to make sure everything is looking good. Now if you are talking about using the iLoop tool I am almost certain it will not work on third-party SOR because we need to reanalze it. Hope this helps!

Thank you for the kind words my friend

I am glad you liked it!

Sorry I missed this! Did you get this resolved? If you still are email [email protected] and they will get you squared away.

Yes if it’s on the same network you can use VNC. If it’s on different network you can use QuickAssist or TeamViewer. Although I have not tried it you might be able to do USB3 out to HDMI. I have an adapter somewhere I will have to try it out

I am glad you liked it!

Are you talking about inspection or actually connecting the two. Sorry it took me so long to respond