This was a good walkthrough, sadly im in California. I honestly watched this for some insight on a "clean" removal so i could clean and replace mine. My 93 is throwing an egr code and i need to get it smogged before the years ovr and i figure its a combo of carbon and the hard to reach vac lines being cracked. Do u know if the recirculate tube bolt that mounts to the actual egr is a 30mm or 31mm?

Spent 2 hours working to make it play sound, this video solved it in 2 seconds thanks bud

Have you drifted on the racelands? I have them on my wrx and I like them but once I get my e36 I’m debating on these or bc

Very nice job 👍

Nice job bro 💪

My 240 vert has been owned by an idiot before me at some point; who decided to just cut vacuum lines on the EGR and sealed them poorly causing the car to shake at idle and sometimes die at stop

My 240 has been down for about a decade now... but I recently (couple weeks ago) just cleaned up the intake manifold and everything on it, and I just did the exact same thing you did with the injectors... I hate hate hate phillips on anything in the engine bay.... I've had a ton of bolts snap from rust, but phillips are the worst because they strip so easy.... I'll replace them with damn near any other type (with the exception of slotted!) that'll fit and it'll be better. Now if I can figure out how to get the bottom heat core hose clamped (it's very hard to access), I'll be good to go...

can you install them on my 240

Just came from the EGR video. Engine is sounding much better

what fuel injectors did you buy? Wondering if the cheap ones online are ass.

We had a 1989 Nissan 24OSX and it was the most fun to drive car we ever had.

SHE LIVES~!

Redneck tuners is back🎉🎉🎉 lets goooo

does not work

So i connected my blue wite from the amp to the 12v, and sometimes the stereo will work when it decides to but sometimes it just doesnt. Ive checked the fuses as well, all good. What else could be the issue ?

Hey what’s your instagram. My 240sx has the same issue. Identical. Maybe we can troubleshoot it together lol

Appreciate the effort. Thanks for the video. I now can do this on my own.

Wait, But Where is the STEERING WHEEL?

Thank you for this step by step. Will help me with mine🫱🏽‍🫲🏻

Did you get the idle/misfire issue resolved?

Could I still pass emission tests? Does it help the vehicle run better?

what is that wire harness adapter you were holding most of the time called?

Little late to the party but a tip for the tie rod ends is banging on the spindle itself around the tie rod. That loosens the tension better than trying to hit the actual top of the threads through the spindle

Thankyou Thankyou Thankyou!!!!

I hear the radio comin out the speakers but no music playing

2000 grand marquis ls i installed an aftermarket stereo and i have no sound. Could you help me by pass sound

Thats a nissan 240sx... sweet car...

Great video. I will be doing this soon.

What exhaust are you running ?

Hi, I have got old phone hold and charger installed on the old car, but when I cut it off ( no use anymore), the radio become no sound, may I know what happened

I have a mazda 3 are these worth it i drive 500 miles every week or should i go for the BC coilovers

I've got everything wired right, same radio. No power. Anyone have suggestions?

Your 240sx is super clean btw she may have some cosmetic stuff on the body but underneath she looks to be in incredible shape! makes me miss mine a bunch. It was even the same silver blue as yours. Hang on to her!

This did not work for me

Hey bro great video and info!! So I have a 91 240 that I'm rebuilding would you know where I can get information on which vacuum lines and things I can delete off of that intake and what I cannot delete? Thank you

Very helpful thank you

Great video sir thanks.does the suspension system from 2015-2022 is the same??🌹

My blue and white cable is labeled power antenna but i dont have that any guidance?

9:03 what’s the name of that box

Did that but it blows the fuse each time

5:00 mark important💯💯💯💯💯 must load the springs do not install without loading springs

Anyone about to do this project should do a couple of things that makes it much easier... use a impact! Take off the sway bar it makes it much easier, take the calipers off and hang from frame so you don't hurt brake lines. You can't measure from wheel well because front has a higher arch so its an optical illusion. The truck should be measured at rocker panel. That truck is sitting level. I put on 2" Rough country struts and truck rides great! A simple swap and don't have to disassemble struts. I also put a factory 2018 Z71 Silverado block and ubolts in the rear. It fit perfect and was from my Silverado after a lift. I'm really thinking about putting a 1/4" spacer on top of struts to get another 1/2" out of the front. I have 0 issues and my 2022 Colorado LT REDLINE EDITION 4x4 is constantly off road with no problems, squeak or popping.

Sup man this vid helped a lot and I also have the same issue with the misfire. If you figure it out let me know. I have a 1991 also. Deleted EGR along with the vacuum tubes leading to the air intake

Looks great! I did the same! I'm about to do the 1 inch block in the back

Great vid. Subbed.

Gained a sub bud

🐐🐐🐐🐐

Dang already at 520 subs!!!! I was here from the beginning. Another banger of a video!

Congrats on 500!🎉

Funny question, for no good reason I need my constant power/battery plugged in into ignition as well. Will that screw anything up?