Hey mate, what’s the diameter of the motor mount with 4 screws? Can’t find any info online and wanna know if it will fit before I buy one. Thanks.

Does this need a fuse set up like manual says

how's the speed?

whare are the pros & cons of this kayak?

Are there jet skis in oatley bay

I did exactly the same mate downgraded my pa12 for the exact same yak :) can’t wait to use it

What kit do you recommend for the 50amp circuit breaker or fuse kit?

can you please tell me what battery your using and were the buy it k.i.s.s kyak fishing

Is there any way to lock the motor straight without holding the handle?

Hi, Can I ask what brand wedge mount was used with the railblaza fitting?

Your bottom mount is around the wrong way

You need to get the prop deeper, I can hear so much cavitation

beautiful glassy day there, nice fish too !!

Best kayak is the one you use. I got gear fever with my last boat and it was too difficult to handle. I run a 10.5' now and use it every weekend. Great video. 99% sure this will be my next boat

helped me out , just bought one

The weakest part of this mount is the where the plastic mount connects to the metal tube. The 2 Phillips head screws screw into the plastic and this is all that is holding back the torque of the motor as the thrust relies to twist the joint. The screws work loose after a very short time and gets worse very quickly. I added 4 more screws and still couldn’t get it a solid joint as the original screws had made the hole in the lattice too large. I purchased a new mount and added 4 screws at the start but it still wasn’t good and with the issue with the thumb screws not being able to tighten enough I gave up and made a different mount. My suggestion, these don’t work well at all - don’t buy.

The best vid I've seen on it! So it doesn't work well without a rudder? Is it manageable?

Ru using bait or lures

Steering wont work as well on kayaks with rudders because the motor is fighting the kayak rudder. I would imagine that the steering is more effective if the kayak does not have a rudder.

Finally thank you bro

Just mounted a T24 on a Pryml Titan and that was very fiddly. There is no easy internal access on that kayak and I had to get the nuts on via the rod holder hole. Not the easiest job I have ever done but got there in the end. Haven't got ours wet yet but looking forward to see how well it goes. Good tip about using the rudder, save me having to learn :) The mount is now a bit different as they have done away with the stainless steel shaft and the top plate is angled. Might help with engine stability a bit - yet to see though.

You need to lower the motor a little bit more to stop the prop cavitating

Do you know what size the rail system is? 1/4" or 1/2"?

Well done! 😁👍🏼

Great Vid! Do you use a circuit breaker? Cheers

mate what kind of kayak setup do you have? I am looking for something like you have. Cheers

I've seen a nice and cheap mod you might want to try - you use one of those small polythene chopping boards cut down slightly on an angle and clamped onto the shaft above the prop using electrical cable clamps - there are videos here on KZbin or Amazon sell a proper kit for about $ 60 bucks AUS if you can't be bothered making one. I reckon it would make a huge difference to the steering because all you've got is a tiny fin on the bottom of the watersnake that doesn't add any real steering. Cheers.

What clamp are you talking

Thank you great value video.

Hope you did't lose too much gear. I have a Viking Profish GT which has a very low seating. Not as comfortable but makes it difficult to lean out far enough to flip.

Thinking of buying one - seems they really need to redesign a better clamping system to prevent that motor movement or some sort of tape that doesn't allow the mount to turn so easily in the clamps . Is there any fitted tool supplied to tighten those clamps or is it just down to fingers or pliers ? Many thanks for the practical video on how it works.

Good video, very informative. Thanks. Might have convinced me to get one!

Gets the rolls Royce of kayaks with pedals already for the same price as my house and then spend even more to get a motor...

It seems to me to be asking to have no base, drop the vertical tube dropped down the rod holder just adjacent to where you have it mounted. This way you have no drilling, no holes in the kayak and it should be easy to remove.

Like garantido

Even if you instructed the little guy,, it was still irresponsible to have that child's hands 👐🏼so close to the propeller 😳

Thank you. Good presentation. I just installed my AST 24 on my Hobbie Outback 12 for fishing. I found the mount flimsy and am concerned the torgue might break the connections. i will go slow to start after seeing your startup. I ited a line to the motor in case it down break loose so it don't lose it. I am looking for a way to secure it in one position securely and with use my rudder to steer.

How did you get the bottom bracket and nuts without drilling a hole in kayak?

Hey mate do U get any king this time off the year in Port Kembla ? Very dry around yowie this time off the year no king's only salmon and Pilcher and few trailers ...🙄

cool vid mate the rat kings go hard always lots of fun, got a few nice kings round port in the past the seals can be a pain at times tho

What rood holders are that ?

I have a paddle kayak, Do u think it would be alright to fish at foreshore boat ramp if I don’t venture too far? What kind of fish do you normally get ?

you have the motor set much to high, the propeller is cavitation ,,,,,,so that means the prop is sucking air ,,,,,

ahoy mate, i like the way you say "ALUMINUM"

Did your base plate with the four screws, did the long bolt that goes down the center, did it come with a nut? My was just a screw in bolt. Great video.

I have the exact same setup and was getting frustrated at the engine kick at top speed. Great suggestion about building up momentum. Will give it a try next when I can get to the water. Thanks.

Great video! What fish were they that you caught?

*This kayak is wonderful⊳⊳>**share4.photo/HKayak?48** Everything came as expected, when expected. The kayak tracks well and is a joy to paddle.*

It is heavy I can Do with myself

Where can i buy that attachment for the sail port? Thanks for the video.