Beluga Engineering

Пікірлер

@abhinavkhare950 3 ай бұрын

why you selected pertubation in parameter tab

@abhinavkhare950 4 ай бұрын

have taken any type of contact b/w plates

@Midox0000 5 ай бұрын

how did u run the analysis ?

5 ай бұрын

stimulating work, thank you. may i ask you to share same example with msc nastran solver ? or share the codes for msc nastran. thanks in advance

@edadabkrd 6 ай бұрын

how did you use 2 load collectors (force and moment) at once

@madhavangokul978 7 ай бұрын

hi bro i am the student . I like your video's . I have a quest , how will you run the abaqus sover Could you help me

@SivanPothula 9 ай бұрын

When i click on simulation to select the design ITE, it is showing like "Result file must be loaded in files panel first"...What should i do?

@belugaengineering6588 9 ай бұрын

drive.google.com/open?id=1RkzlCi30FTPOYZxRDEv19GeH1GXL6EHC check this file

@HemanthKollipara 9 ай бұрын

Hi thank you so much for this tutorial I have been trying with different fem file but because of you I was able to perform it successfully. but I don't know why my lattice structure can be seen as lines instead of beams I don't know where the problem is coming from. Would you like to please look at it??

@belugaengineering6588 9 ай бұрын

don’t understand…

@KOWSSHIKPRABU.G 9 ай бұрын

kindly do a crash analysis video using hypermesh and lsdyna brooo.

@belugaengineering6588 9 ай бұрын

have a nice day

@johngopi9465 9 ай бұрын

Very useful video

@belugaengineering6588 9 ай бұрын

thanks

@mateosaenzm 9 ай бұрын

What are your optimization constraints

@belugaengineering6588 9 ай бұрын

drive.google.com/open?id=1_7g7uz4ZBD8nt0nXruf9se6qXYSiryAh refer to it

@김창호기계공학과 9 ай бұрын

Is there a technique to perform topology for multiple load steps at once?

@belugaengineering6588 9 ай бұрын

drive.google.com/open?id=1_7g7uz4ZBD8nt0nXruf9se6qXYSiryAh os-t 2060

@罗智-w6q Жыл бұрын

GOOD SIR

@belugaengineering6588 9 ай бұрын

thanks

@belugaengineering6588 9 ай бұрын

thanks

@SP-jr3zq Жыл бұрын

Sound?? Pls

@belugaengineering6588 9 ай бұрын

no english

@VIJAYKUMAR-fo9kb Жыл бұрын

Set up file plz

@belugaengineering6588 9 ай бұрын

drive.google.com/open?id=1641POKJilXuB-jKoV56teFTw81qBjWm- here

@m.ssharma535 Жыл бұрын

Wow! that is so easy, no need to wait for CAD data from designers. This saves 6 to 8 hrs of work and can be done in 10 minutes. create a line, move the mesh and do trade (design studies).

@belugaengineering6588 9 ай бұрын

easy

@m.ssharma535 Жыл бұрын

Wow! never knew about this function. So useful to change the mesh and no need to create new geometry

@belugaengineering6588 9 ай бұрын

👍

@m.ssharma535 Жыл бұрын

free size optimization.

@belugaengineering6588 9 ай бұрын

👍

@王翼真 Жыл бұрын

The density of the material was not set

@belugaengineering6588 Жыл бұрын

There is no need to set the density in this case.

@haripraneeth Жыл бұрын

Plz add video how to export from hypermesh to ansys and solve

@belugaengineering6588 Жыл бұрын

You can find export menu and make msh file

@haripraneeth Жыл бұрын

Plz export in ansys and solve it.

@belugaengineering6588 Жыл бұрын

just try... easy

@duongminh6239 Жыл бұрын

why did you create centre node? can you explain? Thanks for reading

@belugaengineering6588 Жыл бұрын

fix centre

@chinmaykulkarni8362 2 жыл бұрын

Yes, please include contact surfaces too.

@belugaengineering6588 Жыл бұрын

Contact is not included in this case. Use General Contact to set up a contact.

@cabalio93 2 жыл бұрын

How about contact surfaces?

@belugaengineering6588 Жыл бұрын

Contact is not included in this case. Use General Contact to set up a contact.

@ioanszabo834 2 жыл бұрын

Hello, could you leave me here your contact details please? Thank you !!

@belugaengineering6588 Жыл бұрын

@brud_action 2 жыл бұрын

I have to study the airflow around an airplane, and I have to do the mesh in Hypermesh. The geometry is composed of a parallelepiped domain to which I made a Boolean operation to dig the airplane. I have successfully meshed the plane surface and domain walls, but I am unable to mesh the interior of the domain to create a tetra CFD mesh. How can I proceed, please?

@belugaengineering6588 Жыл бұрын

It's too complicated to explain. How to make tetramesh for cfd can get help from altair engineer.

@brud_action Жыл бұрын

@@belugaengineering6588 Thanks! I solved my problem by doing the job in Ansys directly. I had tried Hypermesh because initially Ansys was experiencing mesh errors. But Hypermesh let me figure out that the mesh could not be generated properly because the geometry was highly dirty. This was particularly the case along the trailing edges of aircraft wings. In addition, conventional geometry cleaning techniques were ineffective. Finally, after some investigation, the non-conforming tetrahedral mesh method was found to be the remedy for this anomaly. So I applied the nonconforming mesh method in Ansys and it worked.

@sunilvishwakarma1661 2 жыл бұрын

Hi sir , Please make vedio on option 3D - CFD tetramesh option in Hypermesh , how to use it, it's an request ,and also audio should be available , it will be ver helpful.

@belugaengineering6588 Жыл бұрын

You can request data from your license provider

@manmohanmp 2 жыл бұрын

i dint see u selecting the components in automatic single surface!!

@belugaengineering6588 Жыл бұрын

@vigneshvicky-ub9fz 2 жыл бұрын

hi sir its very useful viedo can u send that fe model

@belugaengineering6588 Жыл бұрын

kzbin.info?event=video_description&redir_token=QUFFLUhqbGQ0bUpZbmxHNjZlY2h3UXA1Vk12LVhRWFE0d3xBQ3Jtc0trT0FzN2E2TjFRZXFvd0xkaWhNQlJvd3JKbm9YNW5zQnRYVHY3VU9rLW1nZEhUWXFHdDlUNW1wZ3BxVzlCUm1rOVNRcnoyYlJQaWlDZDR1WUZLQWF3VGpKZ2Y0Rks3SnlOSFlTZXVJTUVnVTN3UmRpQQ&q=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D1No-vFjTikKP0Irwv0TijLqyCKg41Q2d2&v=RKkOLxhtNOc

@saj.2958 3 жыл бұрын

So in order to do vibration analysis for this shape can we use this file or do we have to export it as a separate file?

@belugaengineering6588 Жыл бұрын

You can use this entity

@hutech-tranphu8205 3 жыл бұрын

I did the same steps as you but why when exporting via hyperview I get ''Failed to attach results.'' thanks for reading!