Marek Vrzák

Пікірлер

@FinsburyPhil 8 сағат бұрын

Fantastic job, something to aspire to. Just one thing to point out (because it's obvious you care about correct detail) and it's something that's wrong on every Spitfire kit apart for the 1/32 Kotare ones - no rivets should be visible on the wing leading edges. They were filled and sanded at the factory during manufacture and before painting.

2 сағат бұрын

Thank you Phil, yes the rivets on the wing leading edge on the Spitfire could probably have been filled, but the question is if the putty remained on the rivets even after longer combat service. It was often the case on other aircrafts such as the Mustang that the putty fell off the rivets after some time and stress on the structure

@FinsburyPhil 2 сағат бұрын

Yes possibly. Good question, but not something I've heard - I'll have to investigate! (Spitfire nerd).

Сағат бұрын

Anyway I can observe this phenomenon of putty felling off the rivets even on some older airliners at the airport

@kanal5296 2 күн бұрын

Amazing work!

2 күн бұрын

Thank you so much

@robertodellepiane2900 10 күн бұрын

!!!!!!!!!!! ( It' s enough ?)

@Tubeworld24 10 күн бұрын

Nice one

@donaldkenney2648 Ай бұрын

Short and sweet 😋 thanks 👍

29 күн бұрын

Thank you 😉🙏

@Eric-kn4yn Ай бұрын

You could have had a lotta hamburgers pizza for all that money

Ай бұрын

Absolutely 🤣👍

@davidpage3893 Ай бұрын

My wife & I visited friends in Tucson in October 2019 and rode by the boneyard everyday. The boneyard contains more aircraft than most countries Air Force. We went to the air museum and it had an amazing collection of vintage aircrafts.

Ай бұрын

Yes, I was absolutely blown away by the aircraft boneyard in Tucson (there are more than 4 thousand aircraft) as well as the amazing nearby Pima Aviation Museum 🤩

@terrvx Ай бұрын

Great job!

@terrvx Ай бұрын

Awesome :)

@terrvx Ай бұрын

👏👏👏

@terrvx Ай бұрын

Wow, I love the music 🤩

@terrvx Ай бұрын

Inspiring!

@terkav.3499 Ай бұрын

😍😍😍

@terkav.3499 Ай бұрын

Great video! 🤩🤩🤩

@terkav.3499 Ай бұрын

Wow!

@terkav.3499 Ай бұрын

👍👍👍

@terkav.3499 Ай бұрын

👍👍👍👍

@consul6262 Ай бұрын

I cannot believe a human hand can do this, it looks like the real thing, oh to have a tenth of your skill. Bravo.

Ай бұрын

Thank you so much 🙏

@TomasFaktor 2 ай бұрын

Dobrý den, palec nahoru za pěkné fotky zajímavé sbírky. Muzeu palec nahoru za zachování směrovek letadel Luftwaffe v původním stavu..

2 ай бұрын

Dobry den, dekuji. Ano muzeum Udvar Hazy je opravdu paradni s velmi rozsahlou a vzacnou sbirkou a temer vse jsou originaly a nektere se zachovaly pouze v jedinem kuse . Dalsi muzea v USA budou postupne nasledovat 😉...

@paulreichelt1259 4 ай бұрын

500th 👍

@mancavemodelling5136 6 ай бұрын

Incredible work! Might I ask what paint you use for the chipping on the wing root, which is surely the best I have seen in this scale...

6 ай бұрын

Hello, thank you, I used good quality thin brush and Agama metal paste for the chipping diluted by GSI Retarder Mild

@mancavemodelling5136 6 ай бұрын

Thanks! I've never come across Agama products before - I don't think they're generally available in the UK - but I like the idea that you're painting a realistic metal rather than very unrealistic silver paint. I've use prismacolor pencils for chipping effects before, but I'll have to try this out (so long as I can get hold of some)...

@goforitpainting 7 ай бұрын

Professional

@bartlomiejrusiecki 8 ай бұрын

Piękne!

@herrlogan17 8 ай бұрын

Neskutečná práce, opravdu nádhera, těžko se to popisuje. Rád bych byl někdy na Vaší úrovni, no, budu na tom alespoň pracovat :)

8 ай бұрын

...moc děkuji a přeji ať se daří

@errors199 Жыл бұрын

В начале видео самолет,был обнаружен в Карелии.

@neletg Жыл бұрын

Wow.

@TomasFaktor Жыл бұрын

Dobrý den, nezvažoval jste zhotovit video točené kamerou? Úroveň zpracování Vašich modelů vysoce přesahuje standard, který je na YT k vidění a věřím, že by si to postupem času našlo více zájemců. Váš F4U je nejlépe zpracovaný, kterým jsem měl možnost vidět.

Жыл бұрын

Dobrý den, moc vám děkuji za váš komentář i námět. Kdysi jsem nad tím také uvažoval, ale točit a zpracovávat k fotografiím, které posílám spolu se stavebním článkem do modelarářských časopisů ještě video, na to už bohužel nemám časovou kapacitu.

@TomasFaktor Жыл бұрын

@ Rozumím. Inu, rád si prohlédnu alespoň fotky a kdyby jste jednou našel čas na zpracování videa, pak budu jedině radši. Sleduji práce Davida Damka, Josefa Choreně a nyni i Vaše a upřímně se mi zdá, že čeští modeláři mají nejlépe zpracované makety. Proto ta myšlenka s videem.

Жыл бұрын

@@TomasFaktor Děkuji, máte pravdu, Češi patří v kitařině ke světové špičce. Máme tady spoustu šikovných modelářů.

@TomasFaktor Жыл бұрын

@ Poslal by jste odkaz na nějaký ten modelářský časopis, kde máte své modely?

Жыл бұрын

@@TomasFaktor přímý odkaz na to konkrétní číslo v kterém vyšel ten můj model není k dispozici, ale u nás vyšly moje modely v článcích v tradičním časopisu Modelář v zahraničí pak v časopisech FineScale Modeler, Super Model, Model Aircraft, Scale Aircraft Modelling, Euromodelismo

@garyrunnalls7714 Жыл бұрын

I couldn't imagine any fit problems? Lol effin Masterpiece

@tomdemerly Жыл бұрын

This was excellent. Thank you very much Sir!

@Ryker06 Жыл бұрын

Amazing work!

Жыл бұрын

Thank you

@vladimirblazek5465 2 жыл бұрын

Málokteré světové muzeum má tak rozsáhlé a vzorně restaurované sbírky.

@carlosteran5617 2 жыл бұрын

Es tosco y duro...pero alucinante, deja entrever la Gloria de la IngenieríaRusa y la Carroña- Escoria que es el comunismo. ¡¡¡ Viva VOX VIVA E S P A Ñ A !!!

@carlosteran5617 2 жыл бұрын

Lo feo y rudo de algunas ,muchas, máquinas RUSAS forzados por los sovieticos, y presionadas con el siniestro Bolchevique Genocida Comunismo de MIERDA, creo en cualquier caso cazas superiores como este, un avión fantástico ,realizado por un pueblo fantástico- el Ruso- pese al Genocida Stalin y la Ideologia Comunista( el capitalismo es Carroña as well...con sus médicos from Usa selling opio to his/ her own country)...Is the World Sick ??? ¿ Estais todas locas de l vida????🥳🥳🙂🙂😅😅😅🌳🌳🦅🦇😉🦇🦅💩🐏

@okedoke1234 2 жыл бұрын

this video gives spinning circle

@mattrobinson4994 2 жыл бұрын

Bravo! Incredible attention to detail

@herrlogan17 2 жыл бұрын

Work of art!! This is the inspiration what I am looking for :)

@tiezel5656 3 жыл бұрын

Wow very Nice ! Im building the same one right now also aires detail set but its mutch harder than the eduard kit. Great Job

@Hornet2000 3 жыл бұрын

Masterpiece, awesome!! Chapeau!

@jmbernardo 3 жыл бұрын

A master piece. No doubt.

@aitherkratos5939 3 жыл бұрын

Toto je jednoznačne TOP model, klobúk dole. Skvelá práca, čistá a detailná.

3 жыл бұрын

Dekuji

@FPdesignfab 3 жыл бұрын

This looks great. How did you silver spot nearly every rivet? Is each rivet hand painted!? Excellent work.

3 жыл бұрын

Thank you very much.. Yes, that's right, all the silver spots were made by hand on each rivet

@Talltrees84 3 жыл бұрын

My favorite Russian planes of WWII were the IL-2, the Yak-9, the Pe-2 and the humble Po-2. This plane played a hudge role in turning back the tide in the air war in the East. Hindsight is 20 20 but I wish the Allies transfered more torpedo bombers like the Avenger and night fighters like the Black Widow and special operations planes like the Lyslander. Clear the shipping lanes, clear the night and drop agents and weapons to partisans.

@Rob-vv5yn 3 жыл бұрын

Visited in 2016 if your ever in Moscow it’s a short well worthwhile trip to see some amazing and rare aircraft.

@gunnarb.7094 3 жыл бұрын

Tolles Video! Und tolle Musik! Wüßte gern, was das für eine Musik ist.

@horusfalcon 3 жыл бұрын

Beautiful plane, nice music. I wish there had been more hard data, but I can find that elsewhere. It kind of reminds me of an FW-190 around the nose, probably because both planes used radial engines and had those aerodynamically slick cowlings and airscrew spinners? I bet this bird gave the Luftwaffe a good run for its money.

@edstud1 3 жыл бұрын

Most detailed F4U I've seen to date!

@redfalcon3833 3 жыл бұрын

Could you please tell me exactly which engine that is?....I have the same kit and want an engine...the DB 601's are cheap and plentiful. But the Jump 213 it calls for is rare and expensive.....I don't care much about accuracy just a full engine that fits. Any suggestions?.... Ty

3 жыл бұрын

.. It's Jumo 213A-1 on the Fw-190D9 (I used Aires Detail set 1/48 on my model)..DB601 is a similar engine, but with some diferencies, I don't know exectly, try to find out some more details on the website please..

@redfalcon3833 3 жыл бұрын

@ Ty

@baralad2 3 жыл бұрын

Awesome build, words cannot do it justice, just wondering what blue you used for it and which brand of paint. Also is it the same blue that they used for the tri colour paint scheme?

3 жыл бұрын

Hi Paul, thank you for your kind words, I used and mixed various shades of FS15042 Glossy sea blue from GSI (Gunze)...but it is not the same color on that 3-color Corsair

@baralad2 3 жыл бұрын

Any advice on what colour the 3 colour was?

3 жыл бұрын

Mr. Paint colors... MMP-062 Sea Blue MMP-071 Intermediate Blue MMP-001 White

@Ralle1968 3 жыл бұрын

That’s really awesome!😍New Subscriber!Please take a look at my Channel, Thank you 🙏

@baldbollocks 3 жыл бұрын

what is the beaten up aircraft ?

3 жыл бұрын

.. It's Brewster F2A Buffalo ;-)

@baldbollocks 3 жыл бұрын

@ Thanks 👍

@BetterAircraftFabric Жыл бұрын

Its THE ONLY ORIGINAL BUFFALO in existence ! Thankfully they did not "restore it"

Ең жақсы KZbin

Пікірлер