Coming here to figure out how to change mine. I'm a non mechanic 34 year old mom ballin on a budget. Changed my own 1995 audi fuel pump and rotors/brake pads doing this very thing. I will update and let you know if I managed to get this done myself 😊 wish me luck! Thank you to OP for doing this.

I have a vacuum line that I didn't know where it goes was hanging under my blazer and just found out my 4 whl drive isn't engaging and I think that vacuum hose is the problem but I have no clue as to where exactly it goes or coming from. Do you have a video to show that?

I'm constantly having to adjust mine (like with every use). It sounds like you ultimately had to replace your servo motor. Did doing so finally fix the issue?

this had some god points at the begging but most of these cheap Asian guitars have high frets because they are popping out of the slots, you have to glue them in first

6:23 Fret metal does not stick to pickup coils. Frets are typically not made of ferrous metal; most commonly, they are made from a nickel alloy. Not a bad idea to protect your pickups but it's not correct that fret filings will end up attracted by a magnet.

Excellent and helpful video here in 2025! Thank you so much! We actually found a giant shard of glass in our filter which clogged it all!

Mark, I have a question. I just picked up a 2004 Sonoma 4x4. Had issues with 4x4 and the buttons would flash. Noticed that it was really low on trans fluid and the transfer case switch was not even plugged into the vac lines. Trans fluid everywhere…Put a new one on and checked the actuator as well , put on some new lines to make sure there is no vac leak. Put everything back together and all buttons worked perfectly but the front wheels still not engaging. What are your thoughts?

I bought a 94 K1500 Blazer that is in fantastic condition but I can’t get the brake lights to work. Everything else works, even the top brake light works but neither bottom brake lights. I’ve changed brake light switch, bought new socket boards, have good fuses and relay. Hasn’t changed anything.

Can you connect this to your router via WiFi Instead of ethernet ?

Should I order 2 compression rings or will there already be ones in the sled?

Been a big help. Thanks

Thanks for the video and the clear instructions.Be careful when working with electricity

Do you have parts 1-4 for these videos This was insanely helpful man

I just completed my 2022 Colorado oil change and filter replacement for the first time after the warranty. All steps were done exactly as described in this video. Thank you very much. Great job. I will follow this author for anything I can make myself and would appreciate your business.

You are an absolute savior… absolutely everything has been going to hell on me… Been below zero Fahrenheit, with bobcat stuck in a ravine and a dead battery, and I can’t access the engine compartment… Diesel Truck in for stupid, expensive repairs… Almost completely out of firewood, to heat the house… thousands of dollars of other expenses that have popped up… And to top it off the zipper broke on my pants… Hanging on by a thread, and I hop on the six wheeler to start getting more firewood and the brakes are frozen up because of a bad hydraulic lever… Luckily, I had one on hand, but have never installed one nor have I ever bled brakes before even though I’ve done other miscellaneous repairs… Your simple, straightforward video made it so stupid easy to deal with, and saved my brain from exploding and going off the deep end! ‼️❣️🙏🏻🙏🏻🙏🏻

I'm with you on the no gloves

It’s not that easy when the shaft breaks

I don't see the bleeding step at the end?

Thanks works a treat

Do you need to turn off the water and drain before taking tank pressure or can you simply take the pressure reading at anytime?

Lubrication?

Why didn't you show what you did with the grease gun?

Excellent video!!

I hope your still watching comments for this video. Do you know any trick to getting the hvac solenoid out to diagnos. If I unplug the manifold and jump vacuum to the different ports all actuators work. But the solenoid is not changing where to put the vacuum. Thanks

😎👍😎.

Awesome video. Well explained..There aren't too many of these bad boys on the road these days. My 2000 Blazer becomes an antique in July of 2025. Only 155k miles and she's still running like a champion. I hope to have it for another 25 years!

Thank you so much for this video!! Couldn’t have done it without your help. I appreciate you showing how to put it back together too. Thanks again!

Has anyone ever had a problem with air lock when putting the pins back in?

thanks very helpfull

Awesome video, thank you! I couldn't get my washplate off until I found another trick elsewhere online that worked effortlessly: -unscrew the bolt partway -switch hot and cold water lines -run a cycle on "tap cold" which will now in fact be pure hot tap water -the heat and spinning of the machine will pop free the washplate easily

a peice of the cord got stuck in my amp pls help

VERY IMPORTANT....whenever you close the shutoff valve between the well tank and the house plumbing, you MUST turn off your hot water tank...otherwise if it comes on, pressure in your house plumbing will increase rapidly and break things like toilet valves... or worse. You could even damage your hotwater tank if the pressure relief valve is stuck. It is also a good idea to open the highest faucet in the house until you open that shutoff valve again .

That was helpful thank you

I can’t get my peavey vypyr thing to come out, what should I do?

Good information and instructions

Thank you for posting this video!

Good coverage. I think a real crimper might be helpful as those connectors could become loose with the repeated jostling of driving.

I have used your video 3 times to replace this part over the past few years. Thank you!

Thank you. Exactly what I need. I was dreading buying a $50 replacement cord.

Thank you for your time and effort, very informative video.

What if you have 1 green and 2 black wires ? Which black wire goes to silver and which one to brass connector ?

Thanks for the video in 2024. New to us 2001 S10 blazer has all blown speakers. Gonna kicker the whole thing.

Thanks Mark! One mechanic quoted me $300..

,must be nice to have that much room and wire to work with

Just use this tutorial to change the engine in my truck it's exactly the same midnight Edition

DOES IT HELP RECEPTION ??

Thanks Mark. Very helpful

Great video.

THANKS, btw, mine 2015 chevy silverado has the 3m sticker weather stripping.... would you peel it and place in or is the clips enough?

This was a big help for those dump clips on the rear windows. Thanks.