MKEL_1327

Пікірлер

@DocUnstopped 4 ай бұрын

Great video. Going to be doing this on my 2000 Safari soon.

@dennissytsma3561 7 ай бұрын

Try ACF-50 sold online and via Walmart and many others. Aviation product made to prevent corrosion in aircraft by Learjet.

@howardblasingame7961 Жыл бұрын

Nice video, like my Astro Van: short & sweet. I moved to The Ozarks & these hillbilly mountain roads are terrifying. Your video has inspired me to give my '94 a rear sway bar.

@eatsleepbassrepeat Жыл бұрын

What did you do to remove the adhesive on the doors? I just picked up 3 doors to replace mine, and my Astro does not have the plastics. I want to get rid of the pieces on the doors. One is already gone from the drivers door and there’s tons of adhesive still there. The pieces are still attached on the passenger door and slider. Thanks for making the video. All of us Astro Van fanatics thank you 🙏

@radacusthegreat2591 Жыл бұрын

Thank you man! Just got one and holy rusted metal Batman

@isaacmh1124 Жыл бұрын

do you have the link where you bought it?

@MKEL_1327 Жыл бұрын

sorry it took so long for a reply ... but the answer is no... the shroud was an error from some sheet metal shop but it was the right size for me so I bought it .. everything was random off ebay.

@toadjam12000 2 жыл бұрын

I had 2 Astros and miss the 2nd one. If found another one. I would replace the V6 wirh a small block.

@sunnicivang1093 2 жыл бұрын

Time to add 4x4 from an S10

@MKEL_1327 2 жыл бұрын

No.. did that in a previous van... My opinion is it is a step backwards just to get the vanity 4x4 decal and low range that you will rarely use. My AWD in this 2005 is so much better.

@johnnypeanut3529 2 жыл бұрын

I have an old safari I would love to fix it up. How to do?

@johnnypeanut3529 2 жыл бұрын

I like that.

@FDM33510 2 жыл бұрын

Haven't dropped the motor into them yet, but they are fitted and bolted. (This weekend) And yep, had to grind off about half of that resting tab. However, my clam shells are a bit different and are a perfect fit, so no trimming of the bushings was required. Great vid, Thx!

@thisoledad1946 2 жыл бұрын

Pretty awesome the electric fans help for space I’m sure.

@AstroVanTribe 2 жыл бұрын

Thanks for the comment on my CV Axle replacement video - I replaced my swaybar bushings and links recently, too - Thought you might get a kick outta that one: kzbin.info/www/bejne/aJfSqHeeibBlfsU

@rollinsgamer2559 2 жыл бұрын

love it

@rollinsgamer2559 2 жыл бұрын

Thanks. just got my van about 3 months ago 98 GMC with 160k miles. I have those on mine MN van. The rockers are rusted fairly bad. The drivers door piece fell off! I'm afraid if i pull those off it's going to be a nightmare under but i will need to. I kinda like the plastic bumper panels but after i pull them off ill debate on what to do. I'll look around but do you know if there prefab rocker panels you can buy or do i go to a junkyard and try to find some cut them out and weld them on?

@MKEL_1327 2 жыл бұрын

google search Astro rocker panels .. I know I've seen them for sale .. can't tell you where or if they are a perfect fit. Good luck with your project.

@aheadatime 2 жыл бұрын

Hey Mkel, where did you get those small plastic trim pieces to cover up the gap just behind the front two tires that exists after removing all the OEM trim?

@MKEL_1327 2 жыл бұрын

Those are standard on cargo vans... Search the junk yards ... If they are cracked there is a lot of void space on the back side for a epoxy repair.

@offroadastroothervans.4685 2 жыл бұрын

I think I'm gonna get those too,! Great job

@MKEL_1327 2 жыл бұрын

I can't say I am 100% happy with them .. they are tough and shouldn't break down like the poor quality rubber ones everyone sells... but they do transfer a lot of vibration at idle and reverse... once you are going they are fine.

@oby-1607 2 жыл бұрын

You say the temperature probe acts as the ground for the circuit to complete then powering the fans. Wouldn't you want the temperature probe/sensor to trigger another relay to complete to ground. That way you don't overheat or overload the sensor. These things happen over time much like how extension cords cause fires if overloaded.

@MKEL_1327 2 жыл бұрын

I suppose you could do that .. I picked my fans for the lowest amp load I could find .. with that said, If the sensor was before the load it might be a problem but as a ground it's fine. Been running it for years... Adding another relay seems like just another electronic part to fail .. I had a few sensors lying around so I do keep a second one in my emergency parts box on the rig. I carry a lot of parts for this old rig. Have a great day !

@woffordsoverlandjourneys8618 2 жыл бұрын

Were you on the interstate a few days ago and I think Missouri?

@MKEL_1327 2 жыл бұрын

Probably.. was returning from Salt Lake City... I live in SW Missouri

@pinoytemplepilots9974 2 жыл бұрын

I got 2004 Astro with 171,000 for $3,500 in a very good shape, everything works. I think it's a good score

@canuckdog 2 жыл бұрын

Nice job, thanks for sharing

@toddbridges7430 2 жыл бұрын

Let me add my voice to the crowd here…. Very insightful mods and thankyou for sharing. Am wondering about the shock absorber mod … what it is and what gains to be had. Have viewed some of your other vids and it seems your rear end spring attachment has changed also from the original clamshells to something else… perhaps owing to the lift? And again, thankyou for sharing.

@toddbridges7430 2 жыл бұрын

Hey there. I notice your whole clam shell spring attachment setup is gone. Is that due to the lift kit? I don’t see the lift kit install in your video lineup.

@MKEL_1327 2 жыл бұрын

no .. I didn't do a install video for the lift kit .. there is a lot of info on them out there.. the lift kit doesn't mess with the clam shell.. I had another issue and finally decided to eliminate the clam shell and go to U bolts... I guess I should do a video explaining the issue and how to do this but \i don't have time right now.

@toddbridges7430 2 жыл бұрын

@@MKEL_1327 Thankyoi.There are plenty of issues with these clamshells even when trying to go stock.

@brunerr 2 жыл бұрын

Some genius level stuff. Pretty bad ass, man.

@bobslagle1821 2 жыл бұрын

where did you purchase your leaf springs from?

@MKEL_1327 2 жыл бұрын

Think it was SD Springs ... Google Astro leaf springs and you will get a lot of places .. probably pretty much the same.

@XroorX 2 жыл бұрын

Wow! Such great tips I copied the link in my build, 89 Astro. One thing I noticed is that you didn’t install a ceiling fan…because of leaks?

@MKEL_1327 2 жыл бұрын

no fan was because of a lack of money -- I have thought about it a few times .. maybe in the future but last summer I was in the van for 6 weeks and never felt like I needed it .. I'd just open the rear hatch about 2" and used a usb fan blowing in.

@XroorX 2 жыл бұрын

@@MKEL_1327 didn’t realize the fan units were $$$$ . I just don’t want to cut open a non leaking roof if I don’t have to, but 99% of the vans get it done. Thanks for your help!

@cfh4201969 2 жыл бұрын

@@XroorX the Maxx air fans suck. They never work right. A Fantastic fan with the Maxx air vent would be optimal

@XroorX 2 жыл бұрын

@@cfh4201969 Good advice thank you

@acupunctureclinic4216 3 жыл бұрын

I am so impressed. You have an uncommon knowledge. I need your help in converting my 2002 and safari. I live in Boone,, nc 28607. Hope you live nearby and you can fix it. Will pay generously. Thanks Michael

@MKEL_1327 3 жыл бұрын

Thanks for the comment .. I am in Missouri. there are a number of Astro groups on Facebook that have a lot of members that know a lot about them. These groups can be unfriendly but they are a good source of info.

@ronb8052 3 жыл бұрын

I want to ADD those pieces to my Astro Van.....how much do you want for the whole set?

@MKEL_1327 3 жыл бұрын

hadn't really thought about it .. we can work something out but I won't ship these .. you would have to pick them up in Bolivar Missouri

@kevinhornbuckle 3 жыл бұрын

Nice work. Lots of good ideas to copy.

@VAS204 3 жыл бұрын

Subscribed.

@dennissytsma3561 3 жыл бұрын

Thanks for the video, adding to my Astro Van repair research playlist. My videos are long and long winded but I prefer that to people who skip fast forward or edit out mistakes.

@tradmanmike3360 3 жыл бұрын

THANK YOU FOR SHARING THIS VIDEO! WHAT A BRILLIANT IDEA! ILL TAKE A PICTURE OF YOUR CHANNEL I'M NOW SUB. TO AND ALWAYS THUMBS UP!!! I'M A OLD FART, PICTURES ARE MY MEMORY! LOL... FROM THE 641...

@MKEL_1327 3 жыл бұрын

Thanks Mike -- have a great day !

@tradmanmike3360 3 жыл бұрын

GREAT VIDEO!!! THANK YOU FOR HELPING ME AND OTHERS!!! NEW SUB. FROM THE 641.. ALWAYS THUMBS UP!!!

@tradmanmike3360 3 жыл бұрын

NICE VAN! I'M NOT BIG ON SILENT MOVIES, THEY WENT AWAY IN THE 1920S BUT ANYTHING IS BETTER THAN SCREAMING GUITARS WHICH I LIKED WHEN YOUNG! ENJOY YOUR RIDE!

@GrievenceCapitolist 3 жыл бұрын

Sharp van !

@hckevin-1554 3 жыл бұрын

Que rines son esos que le puso ?

@MKEL_1327 3 жыл бұрын

very old american racing wheels

@dennissytsma3561 3 жыл бұрын

Real nice work

@karitunes1 3 жыл бұрын

Thx much. Did you paint front and back fenders black? Mine is 2002 astro LT. it has all the moldings you do but I also have running boards and it's all same color including bumpers in gold. I know you don't have the running/step boards and my side molding isn't attached under van cuz the running boards are but the bumpers are more my question ❓ thx for any help

@MKEL_1327 3 жыл бұрын

I have not painted the fenders black .. thought about painting the lower part a different color but I don't have anywhere to paint without dirt and bugs getting into it. I think removing the running boards and panels is a smart move however, it is a lot of work and if you have no rust and like them leave it alone.

@hierotochan 3 жыл бұрын

Hi there, lots done already to her, look forward to watching the progress. Could you please explain the reason for the Dexcool delete, and the Corvette trans servo mods? I like/understand the reason for the electronic fans, clever relay system. 👍 Edit: Just read the comments for the Corvette servo, interesting.

@MKEL_1327 3 жыл бұрын

dexcool is horrible stuff.. if it leaks into your engine it will ruin it... if someone adds the wrong antifreeze to it you will end up with a jello consistency totally clogged up system. If you remove it you MUST flush everything real well including the heater system... you do not want even a drop of Dexcool left in there when you go to regular green antifreeze. Then you want to label it as never getting Dexcool or some oil change shop might pour some in to top it off... that would be bad. The corvette servo just improves the shifting a bit...

@hierotochan 3 жыл бұрын

@@MKEL_1327 Appreciate the info. I'm in Ireland and have always used Prestone pre-mixed in my cars (I6/EJ25/EJ20/B16) so will probably continue. Will probably do a ChrisFix super flush on the next one.

@mountainman9555 3 жыл бұрын

Would love to see a tour video of the van just bought an 03 Astro

@bullygeneticstv194 3 жыл бұрын

We’ll done

@Test-jk2tf 3 жыл бұрын

What electric fans and shroud did u install. Any links or part numbers? Looking to do the same on my safari

@MKEL_1327 3 жыл бұрын

My shroud was a mistake by a fabricator and I modified it to work on my van... the fans were generic and I made them fit... I did this a long time ago and really can't help you with links ... with these vans you kind of need to be able to fabricate stuff because nobody really makes things to exact fit. Ebay is your best bet for items to do this.

@aheadatime 3 жыл бұрын

Nice job. After you removed the body trim, there was an awkward gap at the bottom of the fender and the bottom of the door. In later pics, this gap seems filled. Did you just bondo the area with alot of sanding?

@bullygeneticstv194 3 жыл бұрын

Did you noise less lag during acceleration? Did you need to upgrade the alternator?

@MKEL_1327 3 жыл бұрын

I did this a long time ago and really do not remember it it made any change in acceleration... maybe but I rather doubt it... Did not upgrade alternator but it is in my plans for the near future. For me the best reason to do electric fans is to gain access to the engine. It is so nice not having that giant shroud there.

@bullygeneticstv194 3 жыл бұрын

@@MKEL_1327 I hear you about the extra room…I would imagine it does help bc when I run my Astro with the ac off it’s more smooth and shifts with less effort…thanks for the response I will be doing this to mine ASAP!!

@ahighervibe4086 3 жыл бұрын

In my opinion where the Astro is designed sort of have to have the panels on. I just painted mine

@MKEL_1327 3 жыл бұрын

many people do paint them..... They were basically a inexpensive way for GM to give the Astro a more custom look .. but the engineering of the way they were fastened on was lacking

@ADVRider78 3 жыл бұрын

I would like to see a close up of those metal strips. They are completely gone on my van and I am trying to reproduce them from aluminum

@MKEL_1327 3 жыл бұрын

I just put up a "Hack" video showing the one rusted piece I still have. My opinion -- take it for what it's worth -- I do not think making it out of aluminum is a good idea... especially if you live where there is salt on the roads. Once the salt gets on them you will get natural electrolysis causing the steel to corrode even faster. I'd try plastic or even wood.

@ADVRider78 3 жыл бұрын

@@MKEL_1327 thank you I will check out the video. I live in Canada, yes salt would be an issue but I try not to drive it in winter: