Kris

Пікірлер

@JR-jw8lk Күн бұрын

Thx man, appreciate you!!

@dkelli6020 2 күн бұрын

Upon closing the roof, my clam shell won’t close in sequence, what could cause that? Also: What radio is that in the 1st car?

@KrisO1976 2 күн бұрын

@dkelli6020 all the cars have the Eonon radio in them. Unfortunately Eonon has discontinued this radio and uses the 9" screen now. It's bigger. It's cool. But it doesn't look factory. It sits in front the ac vents... but you can sometimes still find eonon or other brands that are the same

@KrisO1976 2 күн бұрын

@dkelli6020 the cover on the back is controlled by the motor under the back seat...... broken cover causes the gear to skip.... broken teeth on the gear (unlikely).... broken wire attached to the cover... That's an issue I haven't had, or come across.

@derrickez 2 күн бұрын

What about the broken wires in the harness?

@KrisO1976 2 күн бұрын

One of my E46s MAY have that problem. I hope to address that soon, but i am doing so much at once. Being able to put my top down manually hasn't made that a priority, but I sure will try to see about broken wires on the drivers side at the first hinge eventually

@kidkat4937 4 күн бұрын

Are 325i and 330i have the same injectors

@KrisO1976 4 күн бұрын

@kidkat4937 no.. and I found that out because someone mislabeled their parts. In the description to this video, I have the part numbers for the 330 and the 325.

@Łukasz123sxh 7 күн бұрын

I'm going to replace the spark plugs, new coils and fuel injectors in my e46 320i 2.0 150km. I was only afraid that I would have to code them. Good video. Greetings from Poland

@tylerlow-t8c 9 күн бұрын

This the same for uk or is it driver side

@Elizabeth-vw1vb 10 күн бұрын

2008!!! Where are you?😂

@KrisO1976 10 күн бұрын

Right outside New Orleans. I can be on Bourbon Street in minutes. It has only snowed here 5 times now in my life.

@Elizabeth-vw1vb 10 күн бұрын

@KrisO1976 wow that's great! Hi from Medicine Hat Alberta....we get snow ❄️ and 🥶, but hot in summer...semi desert.🇨🇦☺️

@KrisO1976 10 күн бұрын

Woooo.... that's a 2 day drive north. We rarely get below 50F (10C) here. Summers can easily reach 110F (43.3C) and it's always humid. No one here has snow tires. We don't have snow plows. We aren't used to this, so the whole state is shut down. Most of the roads are ice right now.

@Elizabeth-vw1vb 10 күн бұрын

@KrisO1976 at the moment it feels like-11c and just stopped snowing. It's very dry and powdery so doesn't accumulate quickly. Last year was super cold a few days -47. This year we've had rain this month in between the snow. Weird!!! Summer up to 42c. We get chinooks in winter where the temp can rise 50 degrees in a couple hours. Enjoy the snow while you can...hope it's not too terrible for you.😂

@bogusienombre355 16 күн бұрын

My coolant temp on instrument panel stays at 59 f after full warm up (high noon visually on coolant guage). What's ya guess?

@Georgiyantyufeyev 17 күн бұрын

Hell yeah dude. I love this straight forward and clear explanation of the inner workings and easy fixes 👌

@edwinhernandez6762 21 күн бұрын

Where you my man I need help with my car

@KrisO1976 21 күн бұрын

I'm in the New Orleans area.

@SummerfallWinterspring 21 күн бұрын

I have the same mower the only complaint I have is the holes they left open around the deck spindles. Then the whole top of the mower deck gets clogged with grass and you have to take the covers off to clean it. It would have been nice if they would have made a easy off without needing wrenches but you have to go through the whole thing and why? Are the holes there to help keep the bearings cool? I've never seen this before and I've never had a bearing go bad and I would rather change a bearing every 5 years then I have to clean my deck every time I use my mower. Who's the idiot who designed that and who's the moron who gave it the okay?

@benjamintchang3923 22 күн бұрын

That engine bay looks clean. Thanks for the video, man. I wasn't sure where that sensor was supposed to be, as I have to replace it, too. Sometimes things just don't work out, eh?

@bogusienombre355 22 күн бұрын

That's a huge car show!

@KrisO1976 21 күн бұрын

Google Cruisin the Coast. It's a week long car event the first week of October every year along the entire coast of Mississippi. There is usually 10,000 cars registered and another 5000 or more that aren't registered.

@bogusienombre355 21 күн бұрын

@KrisO1976 thanks Kris for the info. Maybe I will get to Mandeville to see some cousins next year.

@thatoneporscheguyok5300 28 күн бұрын

Hello, when I try to manually open the top part with the Allen key it keeps making like a cracking sound from turning it but won’t open, is that normal?

@KrisO1976 28 күн бұрын

No. Not normal. Where you put the allen key in, there are some plastic gears behind that. If you go on Ebay and search e46 latch gear repair, you will find a bunch of the gears I'm talking about, but metal. I have another video about the convertible top and you can see the gear I'm talking about

@pgzulu Ай бұрын

Thanks man , was able to fix on horn by charging and following your guide ..

@alanmak Ай бұрын

Great video. I see you put two ways in the front. Are they ok as is or would it have been better to use components? I just got an e46 vert and will be looking to swap the audio system so I was curious about the two way coaxials. Thanks.

@KrisO1976 Ай бұрын

Component speakers would sound better than coaxial. I went with coaxial for cost and because I don't have an amp since it was flooded. If I was using the factory amp, I guess you could just hook to the factory speaker wires and not use the crossovers. The coaxial speakers do sound better than the factory speakers, and the Bavsound.

@alanmak Ай бұрын

@ thanks. I figured as much since the tweeters on the coaxial would be pretty low.

@flubjig903 Ай бұрын

Can you do this if the entirely wrong bolt/lug has been forced in?

@KrisO1976 Ай бұрын

In my regularl job, sometimes I have to tap or retap things. It's possible, but it doesn't always work. You can try, and if it's your front hub. It's pretty easy to change. The rear hub is pretty hard.

@ShamanNoodles Ай бұрын

Haha you guys are so cute Makes me wanna wrap mine with my gf

@KrisO1976 Ай бұрын

If y'all are a happy couple, don't let her help you. My wife has helped me a few times now. She is never happy about it while it's happening. But she loves the results.

@jensena.8902 Ай бұрын

Thank you kind sir !

@lolalexxx21 Ай бұрын

can’t believe i didn’t think of that, just lost my brand new one on the interstate lmao. doin this to the new matte ones i have. cheers 🎉

@KrisO1976 Ай бұрын

I've luckily never lost one, but they have wiggled a little more than I wanted them to. Had a few broken clips through the years. A zip tie through the back has been perfect.

@leoln5560 Ай бұрын

Great information 👍

@MrAntpan123 Ай бұрын

holy thats a good looking car, the headlights and the lip and the lip struts are sick. do you have a brand preference for vinyl?

@KrisO1976 Ай бұрын

The dark blue that's on this car, is also on my other car with another blue that are both Vvivid premium, and i really do like them. I've used bad Vvivids before though. I do like KPMF. The Avery Dennison i used is really thin and expensive, but it's easy to work with. All I can really say is if the vinyl has a white sticky side, it's usually not good. If the sticky side is either gray or the color of the wrap, it has been good.

@mestari6289 Ай бұрын

Good video. Does this empty the cooling system? I mean can I just replace the sensor without replacing the coolant?

@KrisO1976 Ай бұрын

With a cool engine, you won't lose a drop.

@mestari6289 Ай бұрын

@KrisO1976 thanks👍

@Jan_-_- 2 ай бұрын

Please get a tripod so we can see the ‘in between’ bits

@KrisO1976 2 ай бұрын

I'm getting a little better. Also, finding out the Sony camera I bought isn't best for this kinda stuff. But I'm going to try to get the camera a little deeper in the engine bay next time.

@yeen69 2 ай бұрын

could you have used the new speakers with the factory amp or no?

@KrisO1976 2 ай бұрын

Yes you can. Lots of people do. I just don't have the factory amp anymore since it was damaged in a flood. It will sound a lot better with the factory amp. Just wire new speakers in to the old speaker wires and you're done.

@Millionaireskarz 2 ай бұрын

can you lock roof down with alen key method ? mine stuck open

@KrisO1976 2 ай бұрын

Yes. Once you get the roof closed, or close to it. If you turn the allen key to the locked closed position, the latches will grab the roof and pull it shut.

@Millionaireskarz 2 ай бұрын

u still have your e46 ?

@KrisO1976 2 ай бұрын

I still have both of these cars. They just look different. Different wraps now.

@samahmed1146 2 ай бұрын

Hello thanks for the video i am. Wonder if u can provide me a pic of the hydraulic pump wiring mine only open first quarter and can hear the pump in the trunk working ..thank u in advance

@rafaelonovaes 2 ай бұрын

Thank you ver much 🙏🙏

@Markus99E34 2 ай бұрын

Hi friend! When you had this problem with the airbag clock, in addition to not having a horn or steering wheel controls, did you have the airbag fault on? Thanks!

@KrisO1976 2 ай бұрын

A bad clock spring doesn't throw any fault codes or lights. It just causes all steering wheel controls to no longer work. The main cause of an airbag light is the sensor in the passenger seat.

@ThePsEuDoAnOnYmOuS 2 ай бұрын

my engine stays at 65 degrees and doesn't ever reach optimal operating temperature, 2 thermostats changed thinking it was it, but it didn't fix the problem. Could it be this sensor?

@KrisO1976 2 ай бұрын

A bad sensor could be a problem... BUT, if you have an automatic, there is a little thermostat under the expansion tank. It breaks in the open position, and that would be my first thought. You have to remove the expansion tank to get it, and it will break when you take the tank off anyway. Buy one before you do the work, because auto part stores sell them for around $100, but you can get them online for less than $20.

@ThePsEuDoAnOnYmOuS 2 ай бұрын

@ i have manual

@thedogpack2014 2 ай бұрын

Where did you find a brand new clock spring for $20??? OEM goes for $300+… need to buy one and I think used ones risk not being centered correctly

@KrisO1976 2 ай бұрын

@thedogpack2014 aftermarket. Type in E46 Clock spring on Ebay and lots come up.

@KennethTurman-t6w 3 ай бұрын

Thanks I appreciate it!!!

@r.duwayneladner7183 3 ай бұрын

Sorry Kris, didn’t mean Chris. Amped up for you getting my Maroon 69 SS 396. Coast resident and only my 2nd CTC with my 52 year owned car. Thanks.

@KrisO1976 3 ай бұрын

3:39 driving by ? It's to bad I didn't get to see it a bit more parked. I may have came across it at another spot. CTC is my favorite time of the year. I used to have a 69 Bel-air, but currently no classics, but I'm still around every year.

@r.duwayneladner7183 3 ай бұрын

Thanks Chris 650, got my Camaro at the 13:39 mark , great vid and sound.

@AlexGalarza-ci9yk 3 ай бұрын

How can I get ahold of you I have questions

@dogfishjones2966 3 ай бұрын

I have had mine now for 5 years. I will admit i sometimes use it to bush hog when i want to add more to my yard. In those five years I have went through 3 or 4 sets of blades which I find normal for my cutting. I do agree the OEM blades are way too much money for how long they last. I get mine off Amazon now for like $35 a set and they last as long as the OEM blades. I have had to replace the center spindle assy. I guess i did not set the star into the spindle notch very well one year and it wore it down flat. Again for $25 on Amazon you cab get a complete assy and 10 minutes later you are off an running. Plus the aftermarket brand has a grease zerk fitting in them. I have had to replace the front deck hanger, but that took me about 5 minutes. I have to blow up my two front caster wheels at least twice a year, they seem to pop off the rim. Again I properly cause that by the way I cut and what I cut. I have the Kawasaki 23 hp engine, service it once a year and it still purrs like a kitten. I have changed the battery once, the wife left the key on over the winter, Now I feel like I have gotten a great mower for the price. Yes, I have had some problems but I use it and I feel it is something no out of the ordinary to me. On a scale of 1-10 I would rate this mower an 8. The only down side I have is no matter what I do, it always seems to leave a small streak in the grass. I have checked the air pressure in all the ties, the blades are new, just weird but I can live with that. I would recommend this mower to any homeowner. I would not for the commercial grade cuttings but it is not advertised as such i do not think, not at the price you can get it for. I think you bought one that was not setup correctly by the seller you bought it from.

@johnjohnson-hj3ek 3 ай бұрын

How do i get notified where the next one is

@KrisO1976 3 ай бұрын

Cruisin the Coast is the first full week of October every year. Look at a calendar, find the first Sunday in October, and there you go. You can google Cruisin the Coast and go to their website also.

@giusy7303 3 ай бұрын

I have a 2001 330 CI. I was going to do the struts by myself this time and I had no idea that the bolts for the rears were inside the convertible housing. All the videos I was watching, showed that you had to remove the trunk liner. Perfect timing for me, thank you.

@KrisO1976 3 ай бұрын

The coupes and sedans, you have to remove the trunk liner. They made it easy for us convertible owners.

@OscarPikeCountyPA 3 ай бұрын

Thank you! It was nice to know and gather all the tools before beginning the project.

@KrisO1976 3 ай бұрын

I have a lot more little projects to do, and I hope i can be straightforward and helpful going forward. The work is easier than making the video for sure.

@jon_allen 3 ай бұрын

"oh shit, i just cursed online" 😂😂 thanks for the video! This gave me a lot more confidence before working on my new to me 2004 e46!

@KrisO1976 3 ай бұрын

I been having nothing but E46s since 2012, and this inline 6 has been pretty easy to work on and, realistically, very reliable.

@youonlyliveonce2556 3 ай бұрын

@@KrisO1976Okay but what were the symptoms, how did you know they did to be replaced, does it throw a code when the injectors are bad ?

@KrisO1976 3 ай бұрын

There was no problems, codes, or symptoms. I changed my injectors, just because it's a 20 year old car. I really like my car. Sometimes I just do maintenance. I didn't have to change them. I could have cleaned them just as easy. But why not just replace 20 year old parts. I haven't had an E46 break down on me in about 12 years.

@King_DTA 2 ай бұрын

@@KrisO1976hey can you please tell me these fuel injectors have treated you since installing them specifically? I ask because I’m in the process of buying some to get my E46 back up and running and I saw these at a good price on A premium website but want to know if they are just crap that’s gonna go back two months later. Hope to hear from you soon before I have to speculate and pull the trigger on some. Thanks man

@KrisO1976 2 ай бұрын

@King_DTA A premium mislabeled their injectors. The 325 and 330 don't use the same injectors, so before you buy check the past numbers. If you have a 330, the fuel injector part number is 13537546245 the Siemens injector is part number 1439800. If you have a 325, the part number is 13537546244. Siemens part number 1427240.. Other than that, I haven't even thought about them since I changed them.