5 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@tango_sierra8608 Ай бұрын
What state ya live in?
@motovlogunleashed 29 күн бұрын
@@tango_sierra8608 Indiana!
@ScubaVapes Ай бұрын
Which headset are you using? My audio peaks out a lot on mine,yours sounded fine..I have the older insta360 x2 which works great..I’m not sure why yours was out focus for so long?
@motovlogunleashed Ай бұрын
Not sure I didn’t even notice tbh. But I’m using the micro avionics pm-100 headset. It’s pretty good once you get the settings right for the mic. The Bluetooth is spotty in the air- phone constantly disconnects and reconnects
@flyingparamotors-scottcrat5569 Ай бұрын
Nice flight.
@kenmoyer5225 2 ай бұрын
I have the 99 GTX. It has the 951. First thing is don’t ever run them if their carbs aren’t fully functioning. You have a very good chance of blowing the engine. It is easy to rebuild them completely. Always use genuine Mikuno parts. Your Seadoo sounds like it isn’t running right at the high end RPMs. Clean the carbs, then check the water valve into the muffler. Check your rave valves. I don’t hear them engaging. You will hear a big, quick jump in RPMs when they engage. After I blew my first engine not knowing any better, I have had 3 great years with it. But you gotta know what you are doing or you will waste a ton of money! Good luck!
@motovlogunleashed 2 ай бұрын
this ski did end up blowing, because somewhere along the line, someone put regular gas with no oil in it. Searching for something new slowly lol
@DerrickM-xw9oc 2 ай бұрын
What if the lever itself won’t move
@motovlogunleashed 2 ай бұрын
if I remember correctly, there are metal brackets on the inside of that. Maybe corroded, or bent or something making them seize up?
@KaleLane-jj6sq 2 ай бұрын
Two wheels on the ground
@joshuas.8239 2 ай бұрын
We’re so segregated and we love it
@karb5818 2 ай бұрын
If that’s all it takes for your day to get ruined 😂
@ownyourworld 2 ай бұрын
So now people saying hello is offensive ? People are fucked
@MariijxanaTV 2 ай бұрын
They either know the biker wave and do it or they own a motorcycle as well as being an annoying cyclist
@JohnSmith-jr7ni 2 ай бұрын
He just waved 😅 ur overreacting
@motovlogunleashed 2 ай бұрын
@@JohnSmith-jr7ni it was all a joke lmao
@JohnSmith-jr7ni 2 ай бұрын
@@motovlogunleashed oh ok LOL I just wasn't sure
@thom4909 2 ай бұрын
Stupid post
@Sambeezy666 2 ай бұрын
What
@danguehne5094 3 ай бұрын
So when you fixed the exhaust leak did it run smoother or did you clean the carb?
@motovlogunleashed 3 ай бұрын
After time it has ran better honestly. Still not getting full rpm range out of it and some cavitation from the prop but I can't find a wear ring and impeller kit anywhere
@LloydSegler-te9fg 3 ай бұрын
I have a 1998 gtx. I was given it and never been on one
@motovlogunleashed 3 ай бұрын
@@LloydSegler-te9fg they’re sweet machines but this one blew up shortly after this video. Bottom end had a giant hole blown through it
@mikewilson452 5 ай бұрын
You never told us how fast it got up to.
@motovlogunleashed 5 ай бұрын
gps speed in mph is on the screen. 5:50 hit 49mph top speed
@joebell8013 5 ай бұрын
All day 54MPH
@davespeer3293 7 ай бұрын
I stopped watching as soon as you re-stated and agreed with something that Dell said.
@motovlogunleashed 7 ай бұрын
Was an obvious joke man lol
@terryroberts4321 7 ай бұрын
DELL IS A DICKHEAD !!!! HE SLAGS DOWN ALL PARAMOTORS EXCEPT FLAT TOPS !!!!
@BSmithPPG 7 ай бұрын
I’m glad my wing is connected directly to my harness (I have a Nirvana Rodeo). I’ve never understood why these PPG builders hook the wing into a swingarm instead of what the person is actually strapped into (the harness).
@7996hobguy 7 ай бұрын
My paramotor (Skymax) has offset swingarms that helps minimize torque twist.
@sc2performance 8 ай бұрын
Excellent microphone quality! Looks like a good lake to ride.
@motovlogunleashed 8 ай бұрын
Thanks a lot! I have a video on the mic setup as well. Lake is amazing. Our channel is the only part I’m not the biggest fan of
@lobbyrobby 9 ай бұрын
I don't know jack shit about this but I wonder when they say "stay up on their own" do they mean without the harness attached? You have a decent amount of weight hanging there. I'd like to get into paramotoring someday. I've been geeking out on researching different brands. Parajet and limitless are on the top of my list but now I'm paranoid about the swingarm bolts haha.
@motovlogunleashed 9 ай бұрын
While sitting on the ground without any weight in the seat they’re apparently supposed to stay up at the locked out position on their own due to the friction. With that being said I haven’t done anything to fix this and have flown probably 4-5 times since then. It’s cold so I’ve been done for the year but if I’m being honest I’m probably not going to try to fix it yet. I’m not doing acro and pulling Gs so I’m not concerned. Parajet and limitless are so cool. I wish I could test out a limitless. But parajet has proven reliability long term.
@Twin-Nick 9 ай бұрын
Kid trying to sell me one says it goes 65 💀💀💀
@reekeen8257 8 ай бұрын
If the impeller/wear ring/engine are all in top condition, it should do about 60. 65 is out of the question
@rctroller2600 10 ай бұрын
Has no one heard of sae...a 3/4 inch socket fits perfect on the nuts with a vanity cap...
@motovlogunleashed 10 ай бұрын
3/4 was what I used initially that caused the damage to the cap 🤷♀️
@brobinson8614 10 ай бұрын
Did you go down one size? That part of the video was too brief, looked like you went to an 18mm?
@motovlogunleashed 10 ай бұрын
Nope stayed at 19. Used 20 on the rest with no issues.
@tire887 10 ай бұрын
Or just buy 18.5/19.5 flip socket
@mike-x1e 10 ай бұрын
was just about to comment this! love mine, don’t use it very much but comes in handy when you need it
@motovlogunleashed 10 ай бұрын
Good point
@larryoshea3557 10 ай бұрын
Just bought a 2000. Need to learn a lot.
@Jandejongjong 11 ай бұрын
1st to 2nd gear,. their realy long gears. so yeah it bites in a gear. just use the clutch to sink it in smooth and you dont need high revs. the engine and gear box is made for lower revs to be smooth. your actually riding your whole video in low revs.
@motovlogunleashed 11 ай бұрын
Yeah was trying to not burn through gas just riding in high rpms at a low speed. Deer are scary lol
@Jandejongjong 11 ай бұрын
12:30 saying you barely twist,. but you do twist a lot.
@motovlogunleashed 11 ай бұрын
Like 1/16th of the throttle range lol if that
@richardwoodhouse8397 11 ай бұрын
I enjoyed that ride through the woods, who need a gun I just got my self a dear clean kill on my gen3 busa, more expensive than a bullet though lol" got a gen2 in blue like your dads gen1, I think you can't beat a busa or zx14 for high speed road use they do it all so well and what I like over litre bikes is how well planted they are at high speed cornering, good vid a bit different too.
@motovlogunleashed 11 ай бұрын
I always felt like my r1 was much more planted but I think this one needs some new tires. I believe they have some touring tires and I’ve had the back wheel slip out from under me a couple of times on corners on this bike. Very scary. lol glad you didn’t die hitting the deer on a bike that’s not good.
@jorgeaguero873 11 ай бұрын
Just picked up a 2001 GTX $200.oo the guy said the exhaust an throttle body plus little wiring needed finished. Yep waterlogged my 787 rfi. Having been in automotive mechanics half my life decided to pull the head. Wow..1.00 stamped on pistons. New gaskets and it fired right up gotta love fuel injection. Rebuilding pump, new carbon seal w boot,cone on drive shaft side of impeller and both 2 I found out driveshaft bumpers.was missing the one at flywheel end. Shaft showing bad wearing on other end. Rubber pushing shaft away from pump I believe.waiting for parts so I can get it wet. Wanting to hear an feel that 1 mm. Over bore beneath me .if she runs out way I'm expecting then I'll tear it down and ring her. Then I'll spend the $200 with SBT for a new shaft. Oh yeah the engine is a SBT built also. 11-2023
@motovlogunleashed 11 ай бұрын
This thing has like 230 something hours on original parts. I think it’s nearing its end. The last time I had it out I was flying full throttle across the lake then it just died. I tried swimming it to the marina but didn’t work so I had to crank it the entire way back. Surprised I didn’t burn up the starter but when I got back and took the seat off smoke was bellowing out of the engine compartment. Ground wire on the battery was slightly melted. Something going on. I hinestly hate the old two strokes and might break down and buy a new spark trixx. They look like a lot of fun but people complain about routine maintenance being difficult but it can’t be more difficult then maintaining a clapped out 90s 2 stroke PWC. Lol
@JimChair-zx4lu Жыл бұрын
Are you in Seattle
@motovlogunleashed Жыл бұрын
Indiana!
@chrisbajema8002 Жыл бұрын
Smooth landing I thought you were closer to the death boxes lol. Nice reward. What state?
@motovlogunleashed Жыл бұрын
Indiana! GoPro makes the area look a little bigger than it is, but I definitely had more than enough space
@lt.dansparamotoradventures2592 Жыл бұрын
Very nice!
@fonz1116 Жыл бұрын
There really is no way to accurately describe the my ride oh man it’s amazing and I’m young I don’t need it yet most importantly Kawasaki engine I’ve also heard good things about out the toro engine. And a fabricated deck of your choice stay away from stamped steel deck
@motovlogunleashed Жыл бұрын
Had no issues all year so far. Runs great and cuts great.
@landonparsons23 2 ай бұрын
Do you think you could use it for light commercial use. About 30-35 yards a week ?
@fonz1116 2 ай бұрын
@@landonparsons23 definitely
@stretchnuts4661 Жыл бұрын
I got a 97 Yamaha 760 for free from a guy selling his house in my neighborhood with the trailer, he had to get rid of it ASAP and it sat under a tree for 6 years and didn't run. But I think I can get it going. Pretty excited
@motovlogunleashed Жыл бұрын
It’s surprising to see how little you can do to get something running that has been sitting for that long
@RealSuburbanCowboy Жыл бұрын
There is an auto bilge on these machines. Probably the check valve that quit working. Much easier than messing with all that.
@motovlogunleashed Жыл бұрын
Got a part number to reference? I have a complete service manual for this and didn’t see anything about that anywhere
@buckley478 Жыл бұрын
I was saving up for a maverick but not anymore!
@motovlogunleashed Жыл бұрын
I love my maverick honestly. It is scary but I think with proper attention it’s not a huge issue
@motovlogunleashed 9 ай бұрын
Wanted to see if you ever purchased anything and if so what did you get?
@buckley478 8 ай бұрын
@@motovlogunleashed I haven't yet I have an older kangook with moster but I would like to get somthing more modern with Torque Compensation. You have any ideas?
@motovlogunleashed 8 ай бұрын
@@buckley478 limitless have been really cool but the mavericks torque compensation in the swing arms
@shanesplanetshane3795 7 ай бұрын
@@buckley478 Love my kangook. I started with a vik, and it was nice and durable. I fly an amaruk now and its a little better at compensation. Offset arms do help. Its quite wing dependant (torque) as well. My arms dont hold themselves up anymore. Its of little concern, its simply the bushings wearing in. Bushings wear, so the bolts and arms dont. My buddy used to fly a macFly, and now flies amaruk. He says the MacFly had a little better compensation, because of the arms being bent for it. Of course, he didnt like the price tag, and his buddy bent an arm, doing acro, on the same machine.
@ToddleyProductions Жыл бұрын
I’d get that oem starter rebuilt. It will be better than anything you can buy
@motovlogunleashed Жыл бұрын
I should have done that because the Amazon starter I bought has already started to act up lol
@ToddleyProductions Жыл бұрын
@@motovlogunleashed yeah. I have a shelf full of oem starters that need rebuilt. Anything online comes from China. They don’t last
@zakellis8746 Жыл бұрын
I’ve got a 98 gtx limited. Just rebuilt the engine and carbs. I got 94kph which is around 60 mph
@motovlogunleashed Жыл бұрын
We need to rebuild the carb completely or buy a new one and redo the fuel lines. It quit running on us and fouls plugs after like 2 minutes of riding lol.
@reekeen8257 8 ай бұрын
@motovlogunleashed Either the needle/seat was no good, or the low speed jets were too rich. Plugs fouling at low speed are almost always caused by these two. I hope everything turned out alright! Edit: Another thing to look out for - if it's dying after completely letting off of the throttle while at speed, then the little plastic check valves in the carbs need to be replaced. Make sure that you don't put them in backwards. Just reference a mikuni carb rebuild video for one of these motors and you'll get it.
@frankportillo7758 Жыл бұрын
Great video! Hope to fly with you some day
@motovlogunleashed Жыл бұрын
Where are you from
@nathanadkins58 Жыл бұрын
dude your mic is picking up so much motor noise is hard to watch. just an FYI
@motovlogunleashed Жыл бұрын
@@nathanadkins58 I need to adjust the mic settings on the headset, and it doesnt help that the guy who edited the video also edited the audio very poorly. I asked him to try to remove some wind and engine noise and he kinda just botched it all. The raw video clips sound okay honestly.
@Rance120 Жыл бұрын
Great video! I'm currently working on my Private Pilot certificate, but this is definitely something I'd love to do in the future. Just seems so peaceful and relaxing.......thanks for sharing!!
@noahhowellstone1264 Жыл бұрын
What lake is that?
@liviamillin9333 Жыл бұрын
*PromoSM*
@user-ej1bq4bq2w Жыл бұрын
If it's a 787 it isn't going to do 60mph. My 96 spx (x4) does 55 with a 717 and less than 5 gals in the tank, but Im pretty sure those can do pretty much the same thing. The weight of the rider will matter too, as well as how much gas you have. Every pound counts that's why with a passenger you're doing high 30's.
@motovlogunleashed Жыл бұрын
This one has the 951 in it! It just started running really bad. I’m guessing it’s the intake. It seems to be missing parts on it and it’s getting too much air would be my guess. The clips that hold it on are gone and it was zip tied on. It was someone’s river rat jet ski I’m guessing.
@jorgeaguero873 11 ай бұрын
787/800 I guess with the 1mm over its possible. I was told my 01 gtx rfi with 1 mm sleeves in it could as long as pump was in top shape.
@Incindio13 Жыл бұрын
From the way you ride in this video, you may be happier with a 300, more low luggable power than 250s usually. Good job either way, keep it up.
@motovlogunleashed Жыл бұрын
My buddies wife rides a beta 300 and its insane how much torque it has on the low end. I really just need to commit to riding more and not cheat myself lol. Thanks for the comment man
@jasonmaurillo254 Жыл бұрын
This is super unique
@Jnr1213 Жыл бұрын
I’ll be trying this out. I’ll be assuming I’m hitting 50-55mph. 97 gti
@motovlogunleashed Жыл бұрын
I adjusted the carb to factory settings, I got it to where it will idle, but still running rough. I got my speed to 54mph now. Going to be replacing fuel lines, and redoing the carb again and see how it goes. Gona be a good winter project. I put seafoam in it and now it runs really bad, wont go over 10mph right now. Im assuming it broke some gunk loose in the fuel lines and sent it to the carb.
@StefanMailey Жыл бұрын
Im still watching...lol. Your wear ring must be on its way out. That ski should hit 45mph. Easily!
@StefanMailey Жыл бұрын
Anything with a Yamaha 701 in it is worth 8-1000$. Best ,most reliable 2 stroke motor ever produced! Its also the most desired. Hang onto it dude.
@motovlogunleashed Жыл бұрын
Currently battling the issue of not being able to find OEM impeller or wear ring for it. Checked partzilla etc. Little frustrating.