Kevin Burdick

Пікірлер

@stevenbettez2017 17 күн бұрын

Fram for the win! You can use the XG7317 size if you have the space. It’s a tad longer but same specs as the XG6607

@burdman480 16 күн бұрын

Thank you for that. I give it a try. I changed out the plastics, so it seems like I have a bit of space for a larger or longer filter. Quite honestly, I just want to know that the filter is doing it's job. I expect this to be one of my last street bikes.

@robertspence831 29 күн бұрын

Don't eat the shell.

@burdman480 29 күн бұрын

Thank you for that. I had never eaten them before. I did not know because they are soft if you were supposed to eat the whole thing of just shuck them. I started just eating nuts and have to say that improved things a bit.

@Luke-wy1fn 29 күн бұрын

08 were only gray, i though. I have one.

@burdman480 29 күн бұрын

I bought the Plastics off of eBay (Chinese made) and then had the tank painted to match and seat redone. It is not a factory color, but I like how it turned out. The plastics were a good fit, better than expected.

@burdman480 Ай бұрын

29:08

@JB-xx9ml Ай бұрын

Good job ... good night! yawn 🥱 😴 🌃 🌙

@JB-xx9ml 2 ай бұрын

Super CUTE, good job Grandpa! ❤

@user-uf4ky3vl2l 2 ай бұрын

😱

@JB-xx9ml 3 ай бұрын

Way to go, good job! 👍🏻 👏 👌

@sebastianteruel7352 3 ай бұрын

Soy profesional y eso es una estupidez que no tiene ningún efecto en la óptica, lo que brilla es el wd40, al cabo de unas horas desaparece!

@burdman480 3 ай бұрын

Agradezco el aporte. Esto pretendía ser una solución rápida para la persona con un presupuesto limitado. La mayoría de nosotros tenemos una o dos latas de WD-40. Descubrí que en la mayoría de los casos dura entre 3 y 4 semanas, dependiendo de las lentes, a veces más. También el Deet funciona bien (repelente de insectos). Estoy de acuerdo, pulir las lentes y sellarlas es la mejor opción. No lo llamaría estúpido si funciona. - I appreciate the input. This was meant as a quick fix for the person on a budget. Most of us have a can or two of WD-40. I found in most cases it lasts about 3-4 weeks depending on the lenses, sometimes longer. Also Deet works well (bug spray). I would agree, polishing the lenses and sealing them is the best option. I would not call it stupid if it works.

@thefurnitureguyaz 4 ай бұрын

I just watched the other video with the drivers side. Thank you for posting this. Not a conventional way to clean, but it makes sense. WD40 is a penetrating oil firstly.

@burdman480 4 ай бұрын

You are right. It is a penetrating oil. From my experience it will lift dirt off of difficult surfaces. Just make sure to wipe down with a clean cloth to get all of the oils off of the vinyl or leather.

@thefurnitureguyaz 4 ай бұрын

Love this. I do office furniture and this would work well with some of the leather reception furniture that we service. Looks good. Thanks for the tip.

@burdman480 4 ай бұрын

Let me know how it goes? I tried it on my seats and would like to use it on a leather or vinyl chair?

@07wrxtr1 4 ай бұрын

Whynot just spend $30and do it the right way: 600 800 1000 1500, polish with 3m plastic/chemical guys headlight, finish with meguaires. That will actually fix the problem of the light refraction - that’s what causes the glare. “Just” spraying deet while a fun exercise, won’t actually serve any longterm purpose because the light will fog back up… I am continually baffled as to why people have decided to throw random chemicals on headlights rather than do them the correct way and be done with it for a few years. The headlight restoration pro - go there. You will find him entertaining as well as informative… and the LONGTERM results = amazing. Personally I would start with a PROPER morimoto d2s 5.0 retrofit, black out the chrome… then refinish the outside. Spending money on real/actual performance is worth it…

@burdman480 4 ай бұрын

Thank you for the comment. This is not a permanent fix. The video was not intended to be that. It is a quick fix for anybody that has foggy headlights. WD-40 or Bug Repellant are household items that are typically readily available and it is an easy application. Anybody on a budget could use this to get a bit more light out of their current situation. Again that is all the video was intended to do. I do agree with you. I will make adjustments on my next video and address the advantage of a more permanent fix.

@givemethejob3293 4 ай бұрын

Its not a quick fix, because you are not fixing it. Temporary bodge would be more accurate.

@burdman480 4 ай бұрын

@@givemethejob3293 I am not quite sure how this qualifies as a bodge? It is a quick fix, temporary fix. Not permanent, but it certainly lightened up the lenses. But, hey... thanks for putting it out there.

@JB-xx9ml 4 ай бұрын

BEAUTIFUL! ❤

@burdman480 4 ай бұрын

Thank you!!

@rodolfogiadach2047 4 ай бұрын

Perfect and simple, thank you!

@burdman480 4 ай бұрын

I don't know how long it will last, but it's so simple who cares if it is a once every few weeks.

@JB-xx9ml 4 ай бұрын

Who KNEW? Great tip ... thanks for sharing! 👍🏻

@burdman480 4 ай бұрын

You bet!

@nestasilloway2147 5 ай бұрын

Promo'SM 🌷

@richg0404 5 ай бұрын

Is that carmel corn or kettle corn or are they the same thing? I've watched they guys at the state fair make what they are calling kettle corn and it is in a huge kettle like that one.

@burdman480 5 ай бұрын

This is Carmel Corn. We make it almost identical to how we make kettle, we just use the Carmel mix instead. The recipe stays the same as far as the measurements go. Here is my other video of us popping kettle corn. It defiantly comes out in a deferent color. - the recipe we use is in the description. - kzbin.info/www/bejne/b4K7i6Sur6aIq5o

@raccoon_the_official9378 5 ай бұрын

I love your content keep it up! 🤩

@burdman480 5 ай бұрын

Thank you! I appreciate you watching.

@douglasgrosch228 5 ай бұрын

awesome blue--- put 2 inch risers does wonders.. and pipe ecu tune =helps factory snatcy ness.. smooth more power

@burdman480 5 ай бұрын

Thank you for that. I like my stock bar height, but will eventually add pipes and a tune. I have noticed the snatchy-throttle response. Smoother would be better. What pipe do you run on yours?

@douglasgrosch228 5 ай бұрын

i have 2 brothers its deep .. and quality -- ECU flach be shoodaben mountain runner premium its amazing smooth and first 10% throttle is easy for mountain riding and relly always run higher gear -- its best mod i have done - $325 mod but with pipe sounds amazing !! / K.N air filter too .. cheers! @@burdman480

@danielmelcher5310 Ай бұрын

Delkevic is the way to go!!!@@burdman480

@rdsamp9214 5 ай бұрын

Haven't you seen Mike Rows issue with Safety First? It's supposed to be safety third.

@burdman480 5 ай бұрын

Ha, I may have to change the sign.

@JB-xx9ml 5 ай бұрын

👍🏻

@JB-xx9ml 5 ай бұрын

BEAUTIFUL!

@burdman480 5 ай бұрын

Thank you!!

@JB-xx9ml 5 ай бұрын

Just too CUTE! 💕

@SimpleOcean 8 ай бұрын

you get the 426f yet ??

@thefurnitureguyaz 8 ай бұрын

No I skipped right to the WR459F with electric start. It is a 2007, and it is about 40lbs lighter with about 9 more horse power. I am still getting used to it. I still have the 99, and TBH, like riding that one a bit more. It is smoother, the ride is more comfortable and the suspension is more forgiving. I am still tweaking my 450.

@Zt3v3 8 ай бұрын

That is how every ram X mount I own works. I have 4 of them.

@burdman480 8 ай бұрын

Thank you. When I got it, it did not swive when it was in the mount. Now it does. If that is how it is, I am OK with it.

@santososornia5741 9 ай бұрын

You ain’t lieyn about starting!! Hot cams compression relief the best!!

@thefurnitureguyaz 9 ай бұрын

So I have the compression relief and the red pull tab on near the carb for hot starting. Once you figure it out, it makes is a lot easier. There is a process to it. I do recommend dirt bike boots when riding. Just got my first pair at 50 years old. Should have done this a long time ago. The kick back is not so bad and if you get hit in the back of the leg, not bad either. Good luck.

@MrCleanEmpire Жыл бұрын

Is the 98 a good version to get as a beginner bike? There's one up for 1500 I think I might pick it up

@burdman480 Жыл бұрын

I am a fan of growing into any bike. This is a bike - if in good condition has a ton of power and will move well. If you are a beginner maybe a 125 or 250 would be a better option. But for $1500 not a bad deal. Good luck. Let me know how it goes.

@MrCleanEmpire Жыл бұрын

@@burdman480 thanks I hear it's a pretty tall bike too. 🤔

@burdman480 Жыл бұрын

@@MrCleanEmpire It is. If you watch some of the how to start videos, you can get on it with the kickstand down. Once on it will squat a little. It has been my favorite bike to ride so far. It has tons of power and ample suspension to do just about whatever you want.

@burdman480 Жыл бұрын

kzbin.info/www/bejne/pXaYdJ5nn91_faM

@EngagingJam Жыл бұрын

Does your machine ruin/damage your footballs?

@burdman480 Жыл бұрын

Yes, you will start to break down the balls. It is important to use good balls and not just the cheapest ones available. Use balls that you would use in practice. You have to remember that when using these machines they give your the reps they need to create muscle memory. That is where the value comes into play. You literally cannot have QB throw as many passes as this thing can do in an hour.

@Jukesvilleishim Жыл бұрын

I have a question. Is it possible to adjust it so that you can fit a different size ball for example a youth ball?

@burdman480 Жыл бұрын

You can use a youth ball. It works best with larger balls as part of the ability to throw the ball is from the ability to grab the ball between the wheels.

@Jukesvilleishim Жыл бұрын

@@burdman480 thank you

@Damon-s Жыл бұрын

Firstly who ever painted like that should just stop. 🤦‍♂️🤣 my 99 has a yz 400 exhaust, decompression cams. on the left side of the carb i capped the air pump lines and removed the red choke it's easy to start.

@burdman480 Жыл бұрын

I certainly did not buy it for the paint. Thanks for the advise on the air pump lines and the red choke. I will look into that.

@swastikgrover3414 Жыл бұрын

You sure it’s the field general, looks like the more expensive model called M1700.

@burdman480 Жыл бұрын

They are very similar, and to be honest other than what I have seen on the web I have not seen the M1700 in person. Regardless, the machine did what it was supposed to do.

@swastikgrover3414 Жыл бұрын

@@burdman480 yeah looks good, only asking because I thought the field general could only spiral and not punt

@burdman480 Жыл бұрын

@@swastikgrover3414 the attachment for the kicking feature had a bump in it that would allow the football to tumble in air. It is a fairly simple guide.

@jamesholden8256 Жыл бұрын

Replace the exhaust cam with the Hot Cams auto-decompress. IT makes all the difference in the world! Here's my 77# kid starting my WR400: kzbin.info/www/bejne/eGW4e4Cwo5J5hq8

@gunther5452 2 жыл бұрын

I have a 98 Wr400f, she's a bear to start on cold days. I found that mine makes a clicking sound when I'm decompressing it to start it. And after that click, it's almost every kick if you put enough behind it. I weigh 145 in a rainy day btw. And I whip this bike around like it's a 85cc😂🤷 I love it, currently waiting on a new subframe

@burdman480 2 жыл бұрын

Send a photo once you get the new sub frame. Would love to see it.

@forextrader6038 2 жыл бұрын

If you ever want to get rid of it (sell it), I'd be willing to take it off your hands.

@onesoul8339 2 жыл бұрын

Hey Kevin ! Great job ! im curious, do you have the reference of thoses motor ? They looks quite powerfull no ?

@burdman480 2 жыл бұрын

I don't. If you goto the jugs website you may be able to get a reference. Good luck.

@georgebartel9151 3 жыл бұрын

I have a 99 400 its super fast just had motor rebuilt

@maxoutram5137 3 жыл бұрын

Hi Kevin, great video thanks. I’m working on a project in the UK. What angles are the wheels at? I understand it’s to help generate the spin of the ball. Thanks, Max

@mihajloprodanovic5512 3 жыл бұрын

Hello, I am a student from Serbia and I have a graphic work in autodesk invertor where I choose to make a model of passing machine but I can not find the dimensions of parts on internet. I was just wondering if you can measure some important parts and send me. Thanks in advance, my email is [email protected]

@burdman480 3 жыл бұрын

I just sent an email to the email address you provided.

@kawayam250 3 жыл бұрын

You got that right when you said buying used is buying the problems. I got an 04' YZ 250 F for $1300. The guy said it was running fine and then it just quit one day. So I got it home and managed to get it started. About a half hour of riding later and CRACK! The connecting rod busted in the motor. Had to remove the motor and take it completely apart.

@burdman480 3 жыл бұрын

That sucks... This bike has been good for the most part. It is a little tough starting but I am sure a carb clean and some new jets may help with that. Otherwise it has all the regular little cheap fixes that one would make to a bike they did not plan on keeping. Good luck with rebuilding the motor.

@jeremiahbeck8936 3 жыл бұрын

Why are the wheels one up one down? And how can I adjust mine?

@burdman480 3 жыл бұрын

One wheel is up and one is down to put a spin on the ball. If you have a baseball thrower the wheels will be level. They will not be able to be adjusted.

@fadiesho4220 3 жыл бұрын

dude i’m looking for one to train and all i see are ones for 2-3000 dollars can u give me places that r cheaper

@burdman480 3 жыл бұрын

I got lucky. I picked on up local here in Phoenix and one in Irvine Ca. I would put out a wanted CL ad with photos and a price range in the description. Then keep looking... Good luck.

@chloemx7534 3 жыл бұрын

Quite good for 1k to be honest. Got mine same year and less after market parts for 2k. It needs some work done, to turn it into a race bike for my height and weight

@burdman480 3 жыл бұрын

Thank you. This bike for us is a buddy bike. My son in law, friends and so on. I can't complain. If it gets broken or a little beat on it is ok. A great bike for the money.

@chloemx7534 3 жыл бұрын

Kevin Burdick definitely I’ve seen some comments saying it’s not good for that price but it really is. Not that expensive like you can say if it needs a couple of things it won’t be that bad

@skinnypedaldown5044 3 жыл бұрын

Definitely got tons of compression. It's a bear to start. Great bike tho. Like you said...I love the gear box. This bike has all the power I need. Sure wish it had electric start! Better have a strong leg or enough ass to kick it. Lol

@tsheejkoo 3 жыл бұрын

thank you SO much Kevin, Hi Kevin, how does the single motor spin the second wheel?

@burdman480 3 жыл бұрын

There is a drive wire / cable that runs from the motor to the second wheel. It works a lot like the speedo in your car. Sorry it took so long to respond.

@burdman480 2 жыл бұрын

Sorry, just saw your comment. There is a connecting cable, similar to a speedometer cable only larger. You can see it in the video hanging down under the machine, between the legs.

@juelalvarado 3 жыл бұрын

Quick question I have one and I can’t seem to get a spiral. Is there something I’m missing?

@burdman480 3 жыл бұрын

Make sure the wheels are clean, put the ball in laces up or laces down. Also we use a regulation size ball or large ball.

@juelalvarado 3 жыл бұрын

Kevin Burdick thank you for the reply. Maybe a silly question but what’s the appropriate way to clean it?

@burdman480 3 жыл бұрын

@@juelalvarado use warm water with soap with towel. You can also sand the wheels with a light grade sand paper. 100 grit, spin them and use a sanding block to take off the top layer of grit and grime. Lastly use good quality balls.

@burdman480 3 жыл бұрын

Here is the link to the Jugs owners Manual. Page 25 for maintenance. jugssports.com/content/various_pdf_files/Machine%20Instruction%20pdfs/football_machine.pdf

@burdman480 3 жыл бұрын

Good Luck...

@burdman480 3 жыл бұрын

One of the questions that I got for this machine is "how much did you pay for it"? This machine I paid $1100 for it. I just picked up a second machine for $1300. I have seen them anywhere from $1000 to $1800 in good used condition.

@djhffootball189 3 жыл бұрын

can i buy one or are they not for sale?

@burdman480 3 жыл бұрын

@@djhffootball189 I have two. I would sell one of them. Where are you located?

@dubstepsnail2208 3 жыл бұрын

I’ve got a 2000 reg wr 400f never used it bought it and haven’t got round to it need to start fixing it up and using it loved my wr 125 it’s what made me buy the 400 also got mt-07 wheelie machine lol but wanna change it to supermoto

@alexchrome9560 3 жыл бұрын

Hi, I have two options, the wr400 and the wr426, but, I have a question. How many hours you need to replace the oil and filter?

@burdman480 3 жыл бұрын

That is a good question. I say that depends on what type of riding you are doing. Heat, cold, water, sand, and so on also contribute to the break down of the oil. Some say 20 hours is a good round number. I say base it on how you ride. If you ride for a mile and it takes you a couple minutes, that is a lot different than riding for an hour and traveling the same distance. Technical riding is a lot harder on your bide than "cruising". Hope that helps. Good luck. BTW - Both are great bikes.

@polobemovinn1741 4 жыл бұрын

Does the baseball pitching machines work for football to ?

@burdman480 3 жыл бұрын

Sorry, I just saw the comment. No. the baseball, soccer machines only work for the sports they are designed for. There is not adjust ability for the different balls. I have heard that you can throw footballs out of soccer machines but I don't think you can do it with any consistency.

@jedcubitt8685 4 жыл бұрын

Hey mate how many gears does it have? I brought one any only has 4....

@burdman480 4 жыл бұрын

Sorry for the late response. I actually had to go and check it out. I have a 5 speed gear box. I have rarely gotten into 5th as once I do I am upwards of 70mph... or at least real close. In AZ we have a lot of open ground but there are also a lot of catus in the desert. Good luck... Let me know what you find out about yours.

@jedcubitt8685 4 жыл бұрын

Kevin Burdick no worries, I did a bit of research and found out they were supposed to have 5. The guy told me it had 4 to save weight and that’s what he had been told. So I got a bit worried since I had saved up for so long to buy it and went out and rode it but it had 5. A BIG relief I tell ya what haha. Thanks man all the best

@burdman480 4 жыл бұрын

@@jedcubitt8685 Have fun with it. Post a photo when you get a chance and please ride safe. Good luck.

@jedcubitt8685 4 жыл бұрын

Kevin Burdick thanks mate, how would you like a photo?

@burdman480 4 жыл бұрын

@@jedcubitt8685 That is a good question. Put one up on your KZbin channel. - Where are you riding at?

Ең жақсы KZbin

Пікірлер