Playback speed set to 1.25

He's sad. Cure his depression with playback speed set to 1.5. This is a great demonstration of (simplified) how valve bodies work. Although you might not want to shift from 6th to reverse. On the freeway.

Hi will this ABS unit cause a dtc c1212 or other codes related to speed sensor

That Same for Santa Fe 3.5

Can you print off the repair procedures with alldata?

Bro your breathing sounds like you're struggling, better get in shape lol Thanks for the video though . . .

I do not know if this is a explanation or a eulogy..Surely they could of got someone with more life & excitement in their narration...

Thank you for the video!

Why does he sound like he doesn't wanna do this but he's being forced to for a school project 😅

Your voice is fine. Snowflakes all of them. EXCELLENT content

Why did you replace the abs module? Were you having issues, brakes locking up?????

If you switch to 1.75x speed, this video is super helpful. Thanks for the info!

This looks like those Minecraft computers using "redstone."

Thanks for the video. Question: would it be easier if I loosened both ends of the bar when replacing the bushings, rather than one wheel at a time?

This was a very good step by step. Thanks for all the details on tools needed as well. To those who have not done the job yet; it would be a good idea to use a funnel with a hose attached. The transmission fluid has a lot of resistance going in and the system with burp many times. I leaked transmission fluid down the transmission because of this. I would use a skinny funnel and pour slowly and take breaks in between to wait for any burping that occurs. Thanks again for the tutorial

How long this job take to finish

I went in to Kingston to get a brake calliper installed. Gave me a list of 1200 dollars in repairs. I am a mechanic, it was all lies. I called them out . They said they took photos of all my brake pads. The photo they showed me were not the ones on my car. I spoke to the owner of the store and told him what was happening. I was told to go somewhere else. Cataraqui store. Dont go there , ever.

That was a stupid move. New bleeder screw would have worked

Thank you for the tutorial! Doing this job today on my 2015 Sorento. Got the same links you are using from Canadian Tire :)

You didn't put any silicone lubricate on the new sway bar bushings. WRONG!

6:12 did you do any drilling prior? or did you just drill the bolt then go make new threads inside the drilled bolt?? ???????????

I feel like they did all this to show off their skills like why I feel like this can be done simple. 😂😂😂

That was the worst review on something I have ever seen anybody give you don't know how to review stuff

I have 2011 Kia sportage that needs front wheel barring replaced. According to your awesome video I just need to order the replacement hub. I don’t need entire steering nuckle with hub on it? Just hub same as you replaced in this video. No pressing of barring necessary this way. Correct?

Good demo, super informative. Thanks for sharing.

Hire a voice over. Your voice and enthusiasm puts some of us to sleep. Im a visual learner and I learned something today. Thank you

the video is interesting. The only thing that i dont understand is this: What is the difference between C1 and C2? and are C2 and C5 the same? And what is the difference between them?(i think both C2 and C5 engage P3 ring gear because they are connected)

Thanks a lot🎉

Bro what was that place? Honda dealership? They ain't doing no big jobs.

All you have to do is remove one 10mm bolt that rests at the top side of the wheel hub. Use a pick tool to gently clean every from around the sensor and lift up on it. Follow the cable into the inner rear cabin of the vehicle to unplug it. Remove 4 10mm bolts, that have the wire bolted onto the frame. Install the new one.

The hoses are cheap and you can spend around $30 total to do this repair: - Hose $4.00 - Power steering fluid to top up $26 Find a power steering return hose line that fits your vehicle here: amzn.to/46VjuNa *IMPORTANT: AFTER THE INSTALLATION* make sure to lube the newly installed power steering return line with General Purpose Grease *on the outside.* This will ensure your new return power steering line does not crack in winter.

I need a video for 2011 KIA RIO SPARK PLUG CHANGE

Yikes 375.00

That motor knocks more than a knock knock joke

I went to Canadian tire for inspection and same thing happened to me they ask to make repair worth 4270. Car was ok never had problem with car.

I think for most folks who don't do a lot of jacking up a car, especially the Sorento as was used in this demo, the options mentioned are pretty simple to follow and safely get the job done. Of course, like many things, there are often other ways to do things. Thanks for the video. It would be helpful for those who have other suggestions to provide a video too. :)

I just bought a new power steering hose less than 4 months ago and now it’s leaking again

how do you learn how to use these tools?

Awesome video man, timeless really. Thabks for taking the time. I think i have a major leak coming from this dumb sensor.

what about the black pipe that makes it so hard to get in there? can you remove that? will you make a video showing how?

This is exactly what’s wrong with my car but I would definitely not be able to replace it myself. One no tools and two id mess everything up lol

Can it run off batteries? Does it take 12vdc and 110?

I have Skoda Rapid Tdi 2013 Stage 1 done. Have driven 2000km after doing so. I have just changed the battery and after new battery is set, the speedometer stopped and glowplug signing on. There is no pickup issue at all. Only kilometre reading stalled. Checked the ECM terminals, no ABS sensor issue detected. On scanner Speed reading is showing though , checked speed needle motor on scanner Ok. All error codes are erasing but Error code P061000 cannot be cleared. What to do ??

I have a 2011 Sorento 2wd, so removing the hub is much easier for me. However when installing the new sensor on the back of the hub, it is very loose fitting and I’m worried that that will allow dirt and debris into the hub bearing. Anyone else experience a loose sensor? I’m going to RTV over it and send it but I’m sure a new wheel bearing assembly will be what I do next time.

out of these online manual sources you talked about; could you recommend the best one that covers JDM vehicles?

Good deal. Thanks!

I just broke these bolts trying to remove them. Gratefull for this vide especially since i have the same motor and setup

I was a flat rate tech for years. got out of the automotive field become a certified structural welder and now do restoration work building old blazers and broncos . more on the fab/welding side as opposed to painting etc. I'm probably going to stay in the restoration/body work line opposed to be a flat rate automotive tech

Hey buddy I fitted my tie rod end to the Kia Sorento 2013 and it's still Freeplay in it, u reckon the knuckle needs replaced

Thank you finally understand, great explanation