Very nice. I have always liked watches and recently I watched some videos on KZbin where a master watchmaker does repairs on vintage Rolex watches. For some reason it was both fascinating and relaxing. So KZbin recommended your video to me. Very good job, I don't think I could have the patience to do that. The most I do is resize my bracelets when I get a watch. But nice hobby for sure. Cheers!
@modsandmovementsКүн бұрын
Thanks for watching, appreciate it! Was that wristwatch revival you were watching? That was kind of where I started also. I’ve been pulling movements down to build up to fixing and servicing watches also. Cheers.
@SmokeythecryptkeeperWickware3 күн бұрын
In Toronto canada I buy a super super clone I bring it to a rolex expert he say it was real rolex . Unbelievable. Your super clone look just like mine. You a expert but a regular person like me will never know. Imagine on amzwatch
@J-ms4hw5 күн бұрын
PRO TIP......The reason you can fit the seconds hand faster the second time is because the edges of the hole in the tube have been rounded off slightly and it slides on more easily. Whenever I'm fitting a brand new seconds hand I always take a fine sewing needle and gently put it in the tube of the seconds hand and roll it around a few times, I can usually get it to seat first or second attempt by doing this.
@modsandmovements5 күн бұрын
Nice one!! I’ve wondered if this is the case. Cheers, I’ll try that on the new build I have here. 🙏🏼
@ellysemakula6 күн бұрын
It's sad that watches that look good cost over 1k+. MaMaCoo watches are REALLY well made, and it just shows how a brand name on a watch can make its price 10x higher. I understand that if you look under a microscope, you'll find the difference, but just how many of you really inspect a watch at that level when you see someone with a watch?
@CaptainMittens8317 күн бұрын
Dude good job! It looks so sharp! I’m watching a bunch of videos because I’m making my own seiko spork watch 👍.
@modsandmovements5 күн бұрын
Nice one mate, good luck with the build! Jump on the Seiko mod reddit page too. So many good modders on there sharing ideas and experience.
@Manashroom18 күн бұрын
How have you found the quality of the metal straps? I paid $80 aud for a case and strap for the AP nautalis mod and the case feels great but the bracelet just aint it. do you have a good source for the bracelets?
@modsandmovements5 күн бұрын
I haven’t tried any of the Nautalis cases/bracelets. Most of the bracelets I get are usually better than a real Seiko bracelet TBH. I mostly try to go for anything with high levels of sales and heaps of good reviews. The only time I’ve had an issue is when I purchased from an item with no reviews.
@hakimbezzi922316 күн бұрын
Very nice job I'll obviously make it
@modsandmovements5 күн бұрын
Thank you!! Good luck with the build
@phucloctranle572721 күн бұрын
19:44 sorry, but what is that liquid?
@modsandmovements21 күн бұрын
That’s locktight, just a threadlocker
@phucloctranle572721 күн бұрын
@@modsandmovements thank you very much 😍
@Midskier22 күн бұрын
Well done, Assembled , not built :)
@modsandmovements22 күн бұрын
Well yes, I didn’t pour and lathe the tiny parts lol. Maybe next time I’ll get some ingot to melt down 🤣
@Myashey24 күн бұрын
A nice first build, the brain fart comment cracked me up, 😂. The second hand is one of the hardest things to master, but as you are now aware it does get easier. Nice looking watch, it will mean more to you than any other watch in your collection, you have instantly bonded with it, enjoy.
@modsandmovements23 күн бұрын
Haha yea, lots of lessons to be learnt that’s for sure! I’m about 6 builds in now and much faster at the seconds hand. You’re right about bonding with that watch for sure, been such a cool journey!
@tomas.d24 күн бұрын
Hey, where did you get the dial from?
@modsandmovements23 күн бұрын
All the parts are listed in the description. For the dial they seem to delist it a lot. If you search Aliexpress for nh34 ‘s’ dial you should find one
@aza101829 күн бұрын
Hey mate do you sell watches ?
@modsandmovements28 күн бұрын
Hi mate, yes I’ve actually just started now I’ve got more experience. Send me a message on IG
@modsandmovements27 күн бұрын
@modsandmovements
@truenorthmuskoka9077Ай бұрын
Im about to build my first GMT. Why does the movement require that tiny washer between the movement and the dial
@modsandmovementsАй бұрын
Hi, that’s the dial washer is puts pressure on the 24h wheel when you change it so that it doesn't jump out of alignment. At least that how I understand it to work
@truenorthmuskoka9077Ай бұрын
thx. Does it get installed with the convex side facing up or down
@modsandmovementsАй бұрын
Convex down I beleive
@exilefrancisco6145Ай бұрын
Which one was the correct hand pusher?
@modsandmovementsАй бұрын
I’ve found these work best. Hour - grey or 1.5 Minute- red or 0.8 Second- white or flat
@AirlatuneАй бұрын
J’ai arrêté quand je l’ai vu mettre ses gros doigts partout sur le cadran… et appuyer en plein milieu pour l’assembler sur le mouvement… mon dieu!
@modsandmovementsАй бұрын
With gloves on! What do you use to press the dial on?
@jontelongcanАй бұрын
you need bigger cots man
@modsandmovementsАй бұрын
Haha, I know. Can’t find anything decent. Anywhere you recommend?
@jontelongcanАй бұрын
@@modsandmovements there should be in different sizes. Good video tho
@bennybenny4238Ай бұрын
Sorry, do you mind telling on how much did you spend for all the parts? And also for the parts itself, were some sort of quality level which may effect the price? Thanks…
@modsandmovementsАй бұрын
Hi mate, it cost me $163AUD which is about $107USD. The the parts and tools are listed in the description of the video. I try to stick with good sellers with good reviews. Seems to be the best way to assure quality items.
@bennybenny4238Ай бұрын
@@modsandmovements noted, thanks 👍🏻
@UsuxАй бұрын
GMT is not aligned. My boy is cross-eyed 😅
@modsandmovementsАй бұрын
Are you talking about the hand?
@meussen3270Ай бұрын
Thanks
@meussen3270Ай бұрын
where can I buy the same dial (with Seiko logo)
@modsandmovementsАй бұрын
You can still get it, just need to search Alix. Try this seller They call them S dial s.click.aliexpress.com/e/_mLkcQKS
@hellingsclash7186Ай бұрын
I don't know where o buy this Seiko dial.. 😢
@modsandmovementsАй бұрын
You can still get it, just need to search Alix. Try this seller s.click.aliexpress.com/e/_mLkcQKS
@hellingsclash7186Ай бұрын
@@modsandmovements Ty Man! I see this sellers but i don't see the name Seiko in dial i think is because copy right sure?. Thank you for this mensagem Man! I haver another question Sorry, If a buy a Pagani gmt can i try change for Seiko dial?
@modsandmovementsАй бұрын
I’m not sure about the Pegani watches. It would need to have an NH movement and also work out dial size.
@nicirvin1994Ай бұрын
I screwed up a couple of times so.. I'm subbing.. 🤔
@modsandmovementsАй бұрын
Haha thanks. Part of the process I think
@anthonyvargas8704Ай бұрын
I wish I could have one but I'm poor and can't have one but I'm still going to get a plastic watch 😞⌚
@modsandmovementsАй бұрын
If you can save for a little longer and get a mechanical watch with a Seiko NH movement, it could last you a loooong time. There are some crazy cheap watches on AliX with decent movements.
@exilefrancisco6145Ай бұрын
Will everything still work the same if I use the jubilee bracelet??
@modsandmovementsАй бұрын
Yea absolutely. Just make sure the bracelet fits the case and you’re good
@exilefrancisco6145Ай бұрын
Thank you!
@exilefrancisco6145Ай бұрын
@@modsandmovements hey quick question. Do you know where I can buy a dial for my Seiko Daytona mod? I can’t find a dial that has the oyster perpetual chronometer on the dial as well as seiko. Even for my GMT dial I can’t find any that have Seiko on it.
@BigM6732Ай бұрын
Love the videos! Would be so cool if you had a beginners guide or how to get started tips n tricks! ❤
@modsandmovementsАй бұрын
Thanks mate. Great idea, I’ll work on putting something together! Anything specifically you’d like to know?
@BigM6732Ай бұрын
@@modsandmovements personally I’m having a hard time with knowing where to buy different parts. Example AliX will have a movement for 10$ and another store with the same movement will be 30$. Is the quality that much different or is one overpriced. Anything is helpful thank you for these videos very inspiring
@modsandmovementsАй бұрын
@BigM6732 Yea the quality can be vastly different. The main thing I like to go off is the reviews people have left
@niklasmolinАй бұрын
That looks great! Where did you get that bezel? And also, the dial is no longer available. Any pointers?
@modsandmovementsАй бұрын
Yea I think Alix keeps pulling it down. If you just search NH34 gmt master S dial you’ll find them
@mikevac1978Ай бұрын
what does it have to be midnight?
@modsandmovementsАй бұрын
We line up midnight, so the date changes at the right time. Otherwise your date could end up anywhere
@imaginekarma8582Ай бұрын
I get right down to eye level with the movement to see the seconds hand pinion. It helped me get the seconds hand on a little more easily.
@andrepowell76392 ай бұрын
Do you happen to have a list of tools needed for a build such as this?
@modsandmovementsАй бұрын
Hi, tool list and links are all in the description of my videos. ✌🏻
@andrepowell76392 ай бұрын
I haven’t attempted a build yet but I have a couple of mods I’ve purchased. These are really great watches and not because the “look” like others….theyre just really great affordable timepieces.
@modsandmovementsАй бұрын
Couldn’t agree more.
@andrepowell76392 ай бұрын
I haven’t attempted a build yet but I have a couple of mods I’ve purchased. These are really great watches and not because they “look” like others….theyre just really great affordable timepieces.
@Javic167Ай бұрын
They are! I did build some mods with the nh series (34,35,36) and all of them run +- 0.5s to 3s a day after regulation. (beat error unregulated, if I did that they would probably all run in the 0.x s realm) You get nice parts, if you buy from the right shops. for 150-300€ you get excellent parts, under 150 or maybe 100, the quality really falls of. My sweet spot is right about 150 for Ali/ ebay parts and 300ish for mod stores like Namoki and so on.
@truenorthmuskoka90772 ай бұрын
I destroyed the second hand on my first build. I purchased a pair of magnifying glasses and never had the again. Great investment
@modsandmovementsАй бұрын
Absolutely. I’ve since got a headset and a microscope for taking apart movements. Well worth the investment!
@user-jk4oz2eo9w2 ай бұрын
you’re literally my comfort person i love you #mamacoo !
@miguel_hdz12132 ай бұрын
What do you use to measure the crown stem and lnow where to cut it? Seems kind of challenging, can you list that and the stuff you glue the stem to the crown with please? Thank you
@modsandmovements2 ай бұрын
Hi, I used a vernier to measure the gap between the crown and the case. Then cut it down bits at a time. Then use lock tight once it’s cut to the correct size
@zzerovr82212 ай бұрын
How much dose the whole set cost??
@modsandmovements2 ай бұрын
The watch parts were about $160AUD or $108 USD.
@zzerovr82212 ай бұрын
@@modsandmovements is The movement from AliExpress actually seiko?
@alexanderkassos33752 ай бұрын
Hi can you let me know from where i can buy the parts to build it
@modsandmovements2 ай бұрын
Hi, all the parts are in the description of the video 🤙🏼
@swampsoup202 ай бұрын
love ur channel. just started watched building. built my first 2 today, my own and also built my dad a watch for his birthday/fathers day coming up
@modsandmovements2 ай бұрын
That’s awesome! It’s so rewarding and fun to do. I bet your dad’s going to love it!
@ringrentaltester82612 ай бұрын
Thanks for your video's ! Explains and inspires me to do a built as well
@modsandmovements2 ай бұрын
Thanks for the kind words! Got a new build video coming soon
@healer27972 ай бұрын
Im looking to build this too. Its my first build. What is the Case and Bezel called? The links dont work anymore
@modsandmovements2 ай бұрын
I’ll have a look now and update them, I’ll let you know what I find
@modsandmovements2 ай бұрын
Just checked and all the links in the description are working. Try this one, case, bracelet and bezel all come together, just pick your colour. Try this one: s.click.aliexpress.com/e/_DdFyxCP
@nickcoleby11912 ай бұрын
I also love the logo! Can we use them too? Your batman build inspired me and I have started my mod journey too! Thank you!
@modsandmovements2 ай бұрын
Thanks!! You can absolutely create your own logos for watches and apply them yourself. Aliexpress has companies that do it
@alexxander34362 ай бұрын
Great work for 1st attempt mate! Looking forward to more videos!
@modsandmovements2 ай бұрын
Thanks, appreciate the feedback. Always working on something the background at the moment!
@modsandmovements2 ай бұрын
Check out my other builds on the channel if you haven’t already
@gbreslin19682 ай бұрын
Inspiring! I may yet take a plunge at assembling my own watch yet! A good video and example of things to deal with and things that can go wrong, much appreciated this one.
@modsandmovements2 ай бұрын
Thanks! 100% recommend it’s so rewarding. And once it’s done it’s something you can own and wear for a long time.
@user-rl2gw8wp9h2 ай бұрын
Can you also build this beautiful watch with a good quartz movement? If so, can you provide a link for which one? Unfortunately my experience with NH35 is bad. Delivered with dirt and hair on the inside. The NH34A purchased later runs on time and is better.
@modsandmovements2 ай бұрын
I’ve got zero experience with Quartz movements, sorry. The NH series is notionally reliable though, must have just got a dodgy one or dodgy supplier possibly. Anything outside of the NH series, Miyota or ETA clone movements you’ll struggle to find cases and parts etc. or at least be very limited. The NH series of movements definitely offers the widest range of choices.
@HEINLUMBY2 ай бұрын
Very nice!!!
@modsandmovements2 ай бұрын
Thank you!!
@enriqueblancas45953 ай бұрын
looking to start building these. this video was super helpful, thank you!
@modsandmovements3 ай бұрын
That’s great, glad it was useful. Let me know how you go.
@DanCastle5183 ай бұрын
Dial and hands link doesn’t work.
@modsandmovements3 ай бұрын
Yea the GMT dials seem to get taken down a lot. If you just search for NH34 gmt s dial you’ll find them.
@julianesquivel40603 ай бұрын
What did you use to make the logo for the dial ?
@modsandmovements3 ай бұрын
These logos were from a website called 4customize. I’ve since ordered more from an AliX seller. a.aliexpress.com/_mtg9H1o
@Enoch-Gnosis3 ай бұрын
I use a 40x loop for the seconds hands 👍🏼I Birds Eye view of the pinion.
@modsandmovements3 ай бұрын
Wow that would be super clear at that magnification!
@abdulkaleem89273 ай бұрын
How could NH34 is a GMT movement?
@modsandmovements3 ай бұрын
Yes, it’s a GMT movement
@abdulkaleem89273 ай бұрын
@@modsandmovements but when I search online it's say it's not a gmt movement. Can you please share me components link from ebay. As aliexpress is banned in my country India
@modsandmovements3 ай бұрын
@abdulkaleem8927 Sorry, I didn’t buy the parts on eBay so wouldn’t even know which sellers to recommend. The NH34 is 100% a GMT movement
@abdulkaleem89273 ай бұрын
@@modsandmovements Thank you 🙏💕
@brennansmacbook85413 ай бұрын
I am buying all the tools, do you think if I have the loupe that a microscope is required?
@modsandmovements3 ай бұрын
Hi, not at all. I’ve you got a loupe you’re going to be able to work it out. I’ve got 5x, 10x 15x and 20x. I used the 5 and 10 the most now. But initially the 15 and 20 were really handy because I had no idea what I was looking at lol. The hardest part is knowing where the pinion is for the seconds hand. 15 or 20 will help you see it and understand where to place it. Hope that helps! Let me know how you go and what sort of watch you build!