Lockout Tag-Out
1:53
21 күн бұрын
Reading an Emissions Label
16:46
21 күн бұрын
How to Read a Micrometer
12:16
21 күн бұрын
Vehicle Alignment Angles
7:08
28 күн бұрын
Series Parallel Circuit Demonstration
4:28
Electrical Breadboard Components
8:16
Parallel Circuit Demonstration
6:57
28 күн бұрын
Series Circuit Demonstration
8:18
28 күн бұрын
VAT 40 Diode Test
2:30
Ай бұрын
VAT 40 Starting System Test
3:00
VAT 40 Charging System Test
3:04
VAT 40 Battery Test
3:27
Ай бұрын
Pre-Alignment Inspection
2:33
Ай бұрын
Spring, Shocks & Struts
7:10
Ай бұрын
Testing Ball Joints
4:21
Ай бұрын
Manual Transmission Service
3:17
Jump Starting a Vehicle
4:05
Ай бұрын
Engine Oil Contamination Check
3:43
Hunter Alignment Machine Demo
18:02
Gasoline Fuel Systems Used
21:07
Пікірлер
@MiguelGomez-vl5zc
@MiguelGomez-vl5zc 16 күн бұрын
Thanks for this video 🔥
@poetryplace
@poetryplace 24 күн бұрын
That Micrometer is inaccurate from the get-go. The zero line on the thimble should line up exactly with the zero on the sleeve. On this mic the sleeve needs to be moved round (using the supplied wrench) until they line up. If you are going to teach how to use an instrument start by learning how to adjust it to zero it out.
@deang5622
@deang5622 25 күн бұрын
So no graph plotted of voltage against current showing the linear relationship between voltage and current. So you are not really teaching Ohms Law properly. You are just teaching how to apply the formula. And this is why the kids don't understand electronics properly and I-V curves.
@user-ep5re2sj9s
@user-ep5re2sj9s Ай бұрын
Jay thank you for taking the time to put these videos together.
@ladamyre1
@ladamyre1 Ай бұрын
I'm a retired GM trained ASE Master Technician who retired as an Automatic Transmission Specialist trained at the Atlanta GM Training College. Re: The "pink" fluid. ATF has a red dye in it that is temperature sensitive. If it gets too hot the dye is destroyed and it becomes brown. Too much heat destroys the fluid's ability to lubricate. ATF also has the most powerful detergents in the business and they get destroyed by the heat as well and turned into varnish. Always replace ATF if it is not nice and red. Re: Engine coolant in the ATF. This only happens if the radiator goes bad. There's a cooler for the ATF built inside one of the side tanks of the radiator. Usually it doesn't require rebuilding the transmission but it does mean you must replace the radiator and all of the fluid in the trransmission. Most auto shops have a way of changing the ATF without removing the pan that's called a "line flush" and it will replace all of the ATF. I would recommend first replacing the filter and then doing a line flush after inspecting the inside of the filter to see if much damage has been done to the clutches. All that, of course AFTER the radiator has been replaced first.
@Android_Warrior
@Android_Warrior Ай бұрын
And to operate those you must have a 10 year degree from college, gone are the days of house garage mechanics.
@jayhales6769
@jayhales6769 2 ай бұрын
Proper torque values for repair is in written form in video.
@mathewchappell3009
@mathewchappell3009 2 ай бұрын
Well Done
@mathewchappell3009
@mathewchappell3009 2 ай бұрын
Great information. Done in a way to make it easy to understand
@darkscorp4415
@darkscorp4415 2 ай бұрын
Damn, this lubricant made from blendered beibies or something, what a bad idea for color.
@Bestbuilt04
@Bestbuilt04 2 ай бұрын
Great video, explained clear and not complicated, I hope this gets the views it deserves
@jayhales6769
@jayhales6769 2 ай бұрын
Differential gaskets a similar to card stock paper also.
@brandonholsinger1151
@brandonholsinger1151 2 ай бұрын
Are there not replacement differential gaskets? If so, what’s the benefit to silicone over the oem gasket?
@jayhales6769
@jayhales6769 2 ай бұрын
You can buy differential cover gaskets if you want. The parts store didn't have one available for us to use. The best gasket sealer to do this job is made by permatex the Right stuff. It has a cure time of 1 minute and don't have to wait up to 24 hours for the gasket material to cure. Working for Dodge we used silicone on all our differential covers. Make sure you let it cure before adding differential fluid. Hope this helps.
@kellismith4329
@kellismith4329 2 ай бұрын
The manufacturer actually recommends not using rtv when using the synthetic fluids in the axle - many styles of gaskets are available, lube locker maks a fantastic gasket that comes off easily the next time and is reuseable
@brandonholsinger1151
@brandonholsinger1151 2 ай бұрын
Please lower the music next time Jay, we come for the information 🤙🏼
@jayhales6769
@jayhales6769 2 ай бұрын
Thanks
@nlnl4523
@nlnl4523 2 ай бұрын
3 too 5 cracks that are visible simple easy way cause if there's 3 too five cracks in a inch
@jayhales6769
@jayhales6769 2 ай бұрын
Thanks for the information.