Network cameras need to be connected to the Internet

For camera connection operation, please refer to: www.sricam.com/article/id/278e0ecc98ba4ac99f6f759840680e02.html

This camera does not support making phone calls.

If you have any questions, please contact us at [email protected]

Try to use AP hotspot to connect. Operation reference: www.sricam.com/article/id/5a31da5a3bf544808d616b41a48a3d84.html.

certainly

1. You can tap the camera a few times to see if this situation still occurs. 2. Adjust the camera monitoring angle to illuminate farther. 3. Try restarting the camera to see if it

Currently the camera does not support the custom desktop function.

1. Open the app--->Settings--->Volume Settings--->Adjust the volume of the camera. 2. Check whether the microphone permission is enabled on the phone.

Try to use AP hotspot to connect the camera. Operation reference: www.sricam.com/article/id/5a31da5a3bf544808d616b41a48a3d84.html

sure

Open the app--->Settings--->Lighting settings--->Switch to infrared mode

If the camera ID is purely digital, only a few of them support AP hotspots

This camera currently does not support standby

Settings--->Volume Settings--->Adjust Sound

Hello, here are the steps for downloading videos from SD card: www.sricam.com/article/id/1e76e38a0e604854b24e171a008b07fd.html

1. Start your NVR 2. Enter the login interface and check the option of automatic login 3. Restart your NVR 4. Tell me the date in the lower right corner 5. We will tell you a string of numbers, which is the new password. 6. You must use this password to log in to the NVR on the same day, and then reset your password (Note: the new password is time-limited, and you need to contact us to get a new password after 24 hours).

SH025 cannot connect with Sricam APP

@@srihomeipc2229 do you mean computer software?

It is an APP developed by us.

Use your fingers to zoom in on the screen

Don't like to connect always failed

@@maricelpatron83568 Try changing the network

Please try to use AP hotspot to connect the camera. Reference: www.sricam.com/article/id/86893fe352324274a2d06304b26d4b01.html

If you have any questions, please contact us at [email protected]

Cameras can be added through the Srihome APP for remote viewing.

If you want to buy our products, you can contact us via email [email protected]

The NVR package does not have a QR code and needs to be used with the NVR.

Reset the camera to use AP hotspot connection. Operation reference: www.sricam.com/article/id/5a31da5a3bf544808d616b41a48a3d84.html

Please try to reconnect the camera to the network

Hello, open Settings--->Click Network Settings--->Switch to nearby wifi

1. Check if the WiFi password contains special characters. 2. Check if you can connect to the camera using 2.4G WiFi. 3. Try to connect to the camera using AP hotspot. Operation reference: www.sricam.com/article/id/5a31da5a3bf544808d616b41a48a3d84.html

Try clicking the Forgot Password button to generate a new password

Please contact our salesperson+86 13923434829

Camera alarm information push settings. Operation reference: www.sricam.com/article/id/7dd59638817543449e7e87aaee4bc9be.html

Hello, try to use AP hotspot to connect the camera. Operation reference: www.sricam.com/article/id/5a31da5a3bf544808d616b41a48a3d84.html.

Hi, you don't need to connect the network cable.

@@srihomeipc2229 just during the set-up?

No configuration required, plug and play

Try resetting the camera, please refer to: www.sricam.com/article/id/6f77a4d5c9644abbb384f7c1a9e2c6c1.html

①NVR does not use a network cable to access the Internet ②The NVR is connected to the network cable, but there is no network on the network cable, and an exclamation mark appears on the network logo in the lower right corner, open the network settings on the NVR system terminal and check whether "obtain an IP address automatically" is turned on

Try to use AP hotspot to connect the camera, please refer to: www.sricam.com/article/id/5a31da5a3bf544808d616b41a48a3d84.html.

is this wide angle?

@@JuantoTripor This is a zoom camera, not a wide angle

@@srihomeipc2229 is it optical zoom

The SH052 is not an optical zoom camera.

The preset position is set to 250. Click the preset value 5 times in a row and the camera will automatically lock the focus.

@@srihomeipc2229 Is there any PDF document or website where I can access the instructions for the lens presets? I'm having difficulties. If I save a zoom value at position 250 and do a recall, the zoom goes back and forth but never focuses. I need to know how to configure it correctly to verify if the camera is working well or if it has a fault and I need to claim it from the seller. ---

@@srihomeipc2229 Sure, here's the translation: --- Is there any PDF document or website where I can access the instructions for the lens presets? I'm having difficulties. If I save a zoom value at position 250 and do a recall, the zoom goes back and forth but never focuses. I need to know how to configure it correctly to verify if the camera is working well or if it has a fault and I need to claim it from the seller. ---

@@srihomeipc2229 Is there any PDF document or website where I can access the instructions for the lens presets? I'm having difficulties. If I save a zoom value at position 250 and do a recall, the zoom goes back and forth but never focuses. I need to know how to configure it correctly to verify if the camera is working well or if it has a fault and I need to claim it from the seller. ---

@@raulfiorito799 If you have any questions, please contact us via email [email protected]

The preset position is set to 250. Click the preset value 5 times in a row and the camera will automatically lock the focus.

Try turning on Settings--->Light Settings--->Infrared Mode & White Light Mode.

Try changing the power source for the camera and then resetting it.

If you have any questions, please contact us at [email protected]

yes

Yes.

Yes.

Download the app, connect to WiF, and you can remotely view it www.sricam.com/videos.html

You can restore the camera to its factory settings and then reconnect it www.sricam.com/article/id/86893fe352324274a2d06304b26d4b01.html

Hi, is there anything I can help you with?

Hello, if you have any questions about the camera, you can contact us via email ~ [email protected]

​@@srihomeipc2229masalahnya ini Monitor NVS009 Rusak dan tidak ada jualan monitor NVS nya saja, untuk kamera masih bagus semua, cara koneksi pakai aplikasi tidak bisa scan barcode jadi 4 buah kamera tidak bisa di pakai,... Penjelasannya bagaimana?????!!!

If you have any questions, please contact us at [email protected]

1. Check if the SD card is recognized by the camera. 2. Try formatting the SD card or replace it with a new one.

@@srihomeipc2229 plz provided customer care number

Try formatting the SD card or replace it with a new one.