Пікірлер
@bravizturnbull2358 7 күн бұрын
Where you buy that square template
@anthonylyonsofaldesigns 7 күн бұрын
Mobilesolutionsusa.com
@ShawnBeaber 9 күн бұрын
Don't believe it is a Roadmaster. Wrong taillights
@anthonylyonsofaldesigns 9 күн бұрын
Got cha yeah am not to up on these cars , just what the customer told me lol
@roblinprasad528 12 күн бұрын
That battery is only good for 600 watts. Had one for kicker cxa1200.1 amp. Switch over to xs power d925 battery man the amp loves it. Voltage stays around 13.1 Volts full tilt. Got a single fosgate t1 12 subwoofer. 10:15
@anthonylyonsofaldesigns 12 күн бұрын
Yeah was supposed to be temporary lol but we soon found out we had to swap that thang quick lol. I'll be swapping out the alternator soon too.
@NickMillerlouisiana 12 күн бұрын
really like that amp rack👍 check out my tahoe build
@anthonylyonsofaldesigns 12 күн бұрын
@@NickMillerlouisiana thanks bro. I’ll check it out.
@charleswilliams2556 13 күн бұрын
Very nice setup bro what’s the measurement on the box I have a similar vehicle like that but mine is the Denali Yukon XL I’m looking to build my box myself I don’t know anything about building a box
@anthonylyonsofaldesigns 13 күн бұрын
@@charleswilliams2556 I can guide you in the right direction. The box is 19 inches tall , 42.50 wide , and 30.00 deep. Before building anything double check that these numbers will work for you. Are you trying to install 18s ?
@charleswilliams2556 12 күн бұрын
@ yes I’m trying to do two 18 resilient sounds gold v2
@anthonylyonsofaldesigns 12 күн бұрын
@@charleswilliams2556 perfect yeah those numbers I gave yeah should work, you would just need to figure out how you want your port to be tuned to . You can search for a any box building apps, or you can go to "The 12 Volt " .
@charleswilliams2556 11 күн бұрын
@@anthonylyonsofaldesigns okay thanks bro I really appreciate that information
@beemackin2316 17 күн бұрын
Very nice
@anthonylyonsofaldesigns 17 күн бұрын
@@beemackin2316 thank you!!
@davidgrason161 17 күн бұрын
WOW! That looks FANTASTIC! Dude, you knocked it completely out of the park!
@anthonylyonsofaldesigns 17 күн бұрын
@@davidgrason161 thank you !!!
@gervaiseminne1348 29 күн бұрын
Great work. Love the design . Love shape of it . Busy with a plan to build one for my 86 K5 Blazer. Only problem is the 4wd shifter on the floor. Might build a trap door that flips up to hold it.
@anthonylyonsofaldesigns 29 күн бұрын
@@gervaiseminne1348 Thank you !!! Yeah shifters can be tricky, however using templates of some sort will make it easier for sure 👍🏿
@scottie81 Ай бұрын
You sell these?
@anthonylyonsofaldesigns Ай бұрын
@@scottie81 yes ! If your interested shoot me a text 360-516-0576
@ashleymoore3672 Ай бұрын
How do you know what belt to get? I have a 240 mechman coming for a 2013 Acura. Probably the same belt you used in the video…
@anthonylyonsofaldesigns Ай бұрын
@@ashleymoore3672 Mechman is a great brand and it should be in the instructions if it needs a new belt. If not just give them a call , they are very helpful.
@ashleymoore3672 Ай бұрын
@ thank you!
@anthonylyonsofaldesigns Ай бұрын
@ your welcome !!! Anytime !!
@pjsearc1 Ай бұрын
I was hoping this video was going to show the work as it was being completed.
@anthonylyonsofaldesigns Ай бұрын
@@pjsearc1 I apologize , did you have any questions about the install ? I can help ya out if you like
@xueyam1022 15 күн бұрын
Same question I want to ask
@pjsearc1 15 күн бұрын
@@anthonylyonsofaldesigns No specific questions at this time. :D But, I intend to do this in the future so I was looking to enjoy the journey and learn as much as I could. I appreciate you reaching out. If I have any specific questions, I'll be sure to send you a message. Thanks!
@bmacster1985 Ай бұрын
Did you replace the small woofer (if it has one) below the shifter
@anthonylyonsofaldesigns Ай бұрын
@@bmacster1985 just disconnected it.
@natesomers5387 Ай бұрын
That looks killer🤙
@anthonylyonsofaldesigns Ай бұрын
@@natesomers5387 thank you.
@nicholasferger3922 Ай бұрын
where did you connect the low high output converter??
@anthonylyonsofaldesigns Ай бұрын
@@nicholasferger3922 The factory system was a Bose , or Harman Kardon and I want to say I tapped Into the factory Subwoofer output. You could also tap into one of the rear speakers as well.
@nicholasferger3922 Ай бұрын
@@anthonylyonsofaldesigns yeah ive been trying to research wiring diagrams for a 2015 RS5 B8.5 With The Bang and olofsun system but cant really find much. Im trying to see if An A5 or S5 would be setup tbe same lol
@anthonylyonsofaldesigns Ай бұрын
@@nicholasferger3922 should be. I’d just try one of the rear speakers first. If it has the B&O. System it for sure should have a sub look in the middle of the rear deck.
@OGCandyman Ай бұрын
Where's that grille material from? Do you use contact cement for the upholstery?
@anthonylyonsofaldesigns Ай бұрын
Grille material is from Mobile solutions USA , and yes I use Weldwood contact adhesive
@viewoftheaskew Ай бұрын
Interesting to put sound material on the surface, and not inside the door. Probably was a lot easier!
@pjsearc1 Ай бұрын
@ 3:39 you can see treatment through the speaker hole inside the door.
@vaboy_ Ай бұрын
💯🏅🏆
@OGCandyman 2 ай бұрын
So do those CT Sounds bonk or what?
@anthonylyonsofaldesigns 2 ай бұрын
@@OGCandyman from what I have heard around the industry they hit hard. This will be my first time installing them.
@victorgonzalez3195 2 ай бұрын
how much will u sell them for
@anthonylyonsofaldesigns 2 ай бұрын
@@victorgonzalez3195 sell ? What?
@victorgonzalez3195 2 ай бұрын
@@anthonylyonsofaldesigns those headlights because they are already wired
@anthonylyonsofaldesigns 2 ай бұрын
@@victorgonzalez3195 I installed them for a customer of mine. He doesn’t even have the car anymore
@mikelee5408 2 ай бұрын
I can drive the car down there. I’m no more than two hours away from San Diego. I’ll bring the subwoofers and amp but the wiring, and everything else you can supply or we can go get together how much for the set up in the video you
@anthonylyonsofaldesigns 2 ай бұрын
@@mikelee5408 shoot me a text 360-516-0576
@mikelee5408 2 ай бұрын
How much
@anthonylyonsofaldesigns 2 ай бұрын
@@mikelee5408 $700
@mikelee5408 2 ай бұрын
So that’s the box the bottom panel in the two side panels just like in the video so a 4 piece set not just the subwoofer box so 1000 for box and the bottom panel for the amp and the two side panels dark brown
@anthonylyonsofaldesigns 2 ай бұрын
@@mikelee5408 no just the box is for sale.
@mikelee5408 2 ай бұрын
Is it possible to get the two side panels? At least I can do without the amp rack
@mikelee5408 2 ай бұрын
I can do the box with the plexiglass is how you got it the side panels to cover the wheel well tubs up in the trunk if that pop water do just the back in the side pieces
@Thizz2979 2 ай бұрын
On bikes u don’t use rca cable from amp to stereo
@anthonylyonsofaldesigns 2 ай бұрын
@@Thizz2979 yes you do use RCAs.
@Thizz2979 2 ай бұрын
😂 ok just never see anybody running them on videos
@anthonylyonsofaldesigns 2 ай бұрын
@@Thizz2979 if the radio is an aftermarket radio than yes there should be RCAs ran. If it’s a factory stock radio than the install is using the speaker leads from the radio to the hi/low adaptor. Than the RCAs will plug into the adapter.
@Thizz2979 2 ай бұрын
@@anthonylyonsofaldesigns got u thank u so much for the explanation 🙏
@anthonylyonsofaldesigns 2 ай бұрын
@@Thizz2979 your welcome , anytime.
@dustinpixler3636 2 ай бұрын
Amazing 👏.
@anthonylyonsofaldesigns 2 ай бұрын
Thanks bro !!!
@justdave7520 2 ай бұрын
Is it sealed or ported through the rear deck?
@anthonylyonsofaldesigns 2 ай бұрын
Sealed. And the box is for sell.
@mikelee5408 2 ай бұрын
does it come wood or already with fabric to the color of your liking and how much? 1987 ss
@anthonylyonsofaldesigns 2 ай бұрын
@@mikelee5408 just raw would for $700 or I can do it for $1000 with whatever color fabric you like
@mikelee5408 2 ай бұрын
I need the set up just like the video all 4 pieces the subwoofer box, the two side panels in the bottom panel, hold the amps 1000$
@anthonylyonsofaldesigns 2 ай бұрын
@@mikelee5408 unfortunately all the panels got ripped out. My customer wanted to add some hydros so now we are currently re doing the install. All I have left is the box. It’s a custom fit solid as hell.
@Sam-pu9yi 3 ай бұрын
what is the blue tape you have used to mask it all off?
@anthonylyonsofaldesigns 3 ай бұрын
@@Sam-pu9yi painters tape. You can get it from Home Depot or Lowe’s. Or any kind of masking tape will work. Just make sure to do at least three layers ! And then a layer of foil ! The foil is a great release agent.
@nameyoufriend 3 ай бұрын
I was wondering if you had a problem with getting highs and or vocals coming from the rear
@anthonylyonsofaldesigns 3 ай бұрын
@@nameyoufriend no after a bit of tuning I got it sounding pretty good.
@DwightStebner 3 ай бұрын
I made my own box of fiberglass also, I raised the seat 2: with square tubing to get box volume
@anthonylyonsofaldesigns 3 ай бұрын
@@DwightStebner that’s dope !!! As odd as it may seem I love working with fiberglass!
@calvinmcanally4235 4 ай бұрын
Beautiful truck!!!
@JayDoty-k1i 4 ай бұрын
i was thinking more like 4 bodys
@anthonylyonsofaldesigns 4 ай бұрын
That's probably way more accurate lol
@HerbertWilson-f8b 4 ай бұрын
Nice I need u to s how me how to wire my tky batwing fairing to my battery and ignition switch. I guess that's how it suppose to be wired
@truscavasile 4 ай бұрын
what did you use for the door skins if that what they are called
@anthonylyonsofaldesigns 4 ай бұрын
Some sound treatment soundeadening
@BIGTAZ7 5 ай бұрын
Superrrrr Sick
@anthonylyonsofaldesigns 4 ай бұрын
@@BIGTAZ7 thank you. Box is for sale now !! Customer is changing up the setup.
@georgegeorgopoulos8698 5 ай бұрын
What route did you take with the wiring for the backup camera? Did you have to drill any holes to get wires between the inside and outside?
@anthonylyonsofaldesigns 5 ай бұрын
There was a grommet that you can go thru on the right side behind the tail light. you won't have to drill anything where
@dustinpixler3636 5 ай бұрын
Waiting on the jeep videos.
@anthonylyonsofaldesigns 5 ай бұрын
@@dustinpixler3636 I got you.
@pucegtr 5 ай бұрын
Nice Work Sir!! How much do you charge to do a set of kick panels like that in the video, but in the half finished state to be wrapped in leather or painted? What size speakers did you use?
@anthonylyonsofaldesigns 5 ай бұрын
@@pucegtr if your serious shoot me a text 360-516-0576
@CoGee23 6 ай бұрын
Man i need some kick panels like that for my 64 riviera. Whats the cost ?
@anthonylyonsofaldesigns 6 ай бұрын
Shoot me a text 360-516-0576
@oliverhuaracha9603 6 ай бұрын
What subs is he using? And do them thangs hit hard in the sealed box
@anthonylyonsofaldesigns 6 ай бұрын
Audio control shallow 10 inch subs. Yes the sound pretty dam good.
@oliverhuaracha9603 6 ай бұрын
@@anthonylyonsofaldesignsI lowkey wanna copy your box if you don’t mind. You got the dimensions?
@jeffpolk90 6 ай бұрын
I own a prowler and I would love for you to put a system in , where are you located. I’m in dallas tx
@jeffpolk90 6 ай бұрын
Hey there my friend where are you located at im in dallas and I have a prowler I would love for you to do
@gabevincent1464 6 ай бұрын
What did you do with the red and black wires and how?
@oliverhuaracha9603 6 ай бұрын
Am I bugging or does his trunk space not have that annoying bump in the middle?? I have an 81 and it has that
@anthonylyonsofaldesigns 6 ай бұрын
Yes it does
@oliverhuaracha9603 6 ай бұрын
Oh ok I watched the first part lol. Where did you or the owner get the door panels from?
@anthonylyonsofaldesigns 6 ай бұрын
He brought them online. Am not sure where tho sorry.
@reggiewilliams2594 6 ай бұрын
I love your setup how can I get in touch I got a 87 Buick Regal
@anthonylyonsofaldesigns 6 ай бұрын
360-516-0576
@GgHh-ur8ov 6 ай бұрын
How do I get in contact with you to get some custom kick panels for my 1964 impala
@anthonylyonsofaldesigns 6 ай бұрын
You can shoot me a text at 360-516-0576
@appleweedcorporation9714 6 ай бұрын
Dope!
@gregatkinson7276 7 ай бұрын
Made it into a hood thug ride.....what a shame.
@anthonylyonsofaldesigns 7 ай бұрын
Lol everyone has their own taste.
@remymiles6173 7 ай бұрын
What kinda rgb lights are those
@anthonylyonsofaldesigns 7 ай бұрын
Addressable LEDS. They take 5volts
@ganddjohnson2645 7 ай бұрын
Love the El Camino. I have a 72. I’ve also installed a system and rear area similar to yours. I just need to finish the bottom panel with the grill. I also built a center console. Videos like yours have helped me a ton to build mine! Thanks and keep up the great work!
@anthonylyonsofaldesigns 7 ай бұрын
That's coo bro !! thanks for the comment !! glad you like the videos.
@mikeyt6456 7 ай бұрын
Looks good, man! I do full custom audio installs in classics as well, and I guarantee no holes drilled into the vehicle and no permanent modifications to the wiring. It’s a very time-consuming process but my clients love the end result, especially when you can slam 140dB out of two 8-inch subs!
@anthonylyonsofaldesigns 7 ай бұрын
That’s dope bro , yeah these classics are fun to work on but yes do take some time.
@blainejobin1039 7 ай бұрын
nice
@anthonylyonsofaldesigns 7 ай бұрын
Thank you
@drjd2real 8 ай бұрын
The best way is a blow-thru. Most people aren't working their trucks anyway
@anthonylyonsofaldesigns 8 ай бұрын
Yes but many folks don’t like the price that comes with it lol.
@drjd2real 8 ай бұрын
Might as well. They don't mind the price of a 70k plus truck or expensive forged wheels and expensive lift kits