Thank you

Sometimes take out of park gear and put back into park .. that works for me

Needed this video!!!!! Thank you !!!!!🙏

Thank you so much... What a game changer

thanks bro.. i saw a guy tear half his front end apart...

As a woman, i salute you 😂 it’s pretty fun and save my money in a car shop😅

That was easier than I was expecting

Thank you

Bro this video is useless you didn’t even show how you had to twist the yellow thing just show your arm moving

Used coca cola to clean the terminals connectors in a pinch, sorted

“You just pop it open”….ummm no.

Jumper my 06 element and now I have this situation, the problem now is my terminal is clean and I bought new battery. I think maybe need other computer

Thank you 🙏🏾

An easy 10 minute job.

Thanks a ton bud.

Yea, NO! Bottom of access cover is held by a butterfly rivet, which you'll have to replace if you rip it off. The upper joke of a fastener may be impossible to turn but turn you must counter clockwise 1/4 to release. I pried into pieces but was able to reassemble. Luckily I had a butterfly rivet as well.

Auto zone told me corporate doesn’t let them do jobs that take more than 10-15 minutes thanks to your video got it done 11 minutes after the sale and had a real nice thanks for nothing moment when I returned the nickel I borrowed from one of the employees.

I just fixed my headlight after this video thank a lot

Who designs this shit?! They just don't design cars to be worked on anymore man

I cannot tell you how grateful I am that you created this video. I have the same exact symptoms in my 06 element. Your suggestion seem like the logical first step in problem solving. I had corroded terminals, cleaned them right up and the car turned over immediately. Thanks again

Mine is doing that now. It was doing this inconsistently since the hot weather masks battery problems. (At least i hope) now its getting cooler and it doesn't crank, and then after a bunch of attempts, it fired up but it felt wonky.

I cleaned the terminals and that wasn’t it. Turns out I had a bad ignition cylinder switch again. Had it replaced for the same issue eight months earlier.

Was it cleaning the contacts or did disconnecting the battery reset something in a computer etc?

neutral safety switch

Honda did their battery service on the Element, still not starting, does turn over but not enough to start the car

Did you try jump starting your element before cleaning the terminals?

We are so hoping that’s what’s wrong with our Honda element… Just went to the store the car is been running fine never had an issue came out of the store and it won’t turn over start click nothing

thank you so much!

Thanks

You really helped me from beating my car to death with an ax. I never would have looked at the wheel for that little door. Thank you.

I have a 2015 and definitely don't pop the panel off from the bottom

Great video but would’ve been even more helpful to show the other side as well .

An error I noticed is he states this is how you do it on a 2013, 2014, and 2015. His 2015 is a different body style than 2013 and 2014 and these instructions may or may not fit those year models. I just did my 2016 which is the same as his 2015. Do not just rip off the access panel the way he does. There is a flat, wide plastic screw at the top that you just turn a quarter either way using a coin or a wide flat blade stubby screwdriver and it unlatches. Mine was difficult to turn but I eventually got it. Do not pull out the rivit holding the bottom of the panel. It's not meant to come apart. Just rotate the panel down or bend it back. Also when unplugging the connector from the bulb be careful not to break the clip that secures the connector to the bulb. Stick a small flat blade screw driver under the clip and twist it to raise the clip out of the way so the connector can be pulled out of the bulb. It may take some effort to wiggle and pull it out.

I can’t get the driver side bulb out for some reason any tips?

About to change mine now

Thanks sir cuz so many mechanic man they don't know shit for real I have my Chrysler 200,2015 he takes all the bumper out just to put a light bulb and he spent all day on it

At least they thought to put an access panel! I hate having to take that wheel well apart!

Thanks! I'm going to look like a genius when my son brings his over later today to change the bulbs! lol

I wouldn't pop the whole cover off like this video says. Take off the top screw only with a washer or a nickel then leave the bottom screw on since it's a rivet and a pain to put back on. Slide the cover around to get out of your way. Trust me it'll be easier when you put everything back on. All other instructions were fine. Thank you.

Autozone told me that this was a 40 minute process so unfortunately they weren't able to help me out lol

Thank you sir.

Be careful with the part about popping the peace off to access lightbulb. You're suppose to unscrew the top piece and swing it down. If you do it this way, you won't be able to pop it back in.

Did these come out white? I bought the Sylvanias XZE and came out yellow went down to silver star “brighter whiter” and still yellow

READ THE COMMENTS BEFORE CHANGING YOUR BULB!!! There is a major glaring error right at the beginning of this video!

Matt's video and directions have a flaw in them. He says, "Just pop the panel off." Don't follow his example. What Matt popped off at the bottom of the panel is a rivet. You can see in his video he tries to push it back in. Good luck with that. The top of the panel has a plastic slotted screw looking thing. Turn that 90 degrees, and the top of the panel will open, and you can rotate it out of the way, pivoting on the rivet. I followed Matt's directions. Now I need to get a new rivet from Chrysler to get it put back together correctly.

Thank you!! This helped so much! Quick, simple, and to the point you’re amazing

Made it look so easy

Preciate ya Matt. I'd have never found that little flap. Had a bit of trouble closing it though. Thoughts?

You sir are a legend. Thanks for sharing how easy it is! Also is the passenger side as easy or complicated?

What bulb does a 2016 chrysler 200 take?