What about the Global input?

So I can run a balanced 1/4 inch or XLR to to mission Gemini and other output to FOH???

Hi Rosh, in the most practical way, what do you think the best way of going from Rhythm to Lead - do you think it's necessary to change Presets or is changing the Scene can accomplish the same thing? Maybe this boils down to the tone quality produced by the product itself (i.e. how much different they are from one amp to another?)

❤ thx

❤ thx

Hi Rosh, thanks for the video, but I'm still left with a couple of questions: 1) I'd really like for my expression pedal's full range of motion to also align with the FM9 having a full range of input expression from 0% to 100%. It doesn't really seem like I can make an adjustment to that from the calibration screen. I still just get from about 6% - about 90%, Have I missed something, or am I just left with this as the situation to live with? 2) I'd like to se the expression pedal to trigger a bypass switch. Easy enough, I managed to accomplish that. But I would like to do it in reverse, where the pedal at the 0% setting engages the bypass, and the pedal at 100% releases the bypass. So far, I can only get the FM9 to behave so that bypass is engaged at pedal in the 100% position. Any ideas for this?

Question: What If im using stereo outboard pedals?

Bought 'em all ...freakin' awesome. Ty Rosh

hi how do i connect headphones to the line 6 helix floor. It has a 3.5mm jack (1/8 connector) , do i need a 3.5mm to 1/4 inch adapter to connect to the phones output on the helix? Also for speakers do i use a xlr to xlr cable. I am very new to the helix.

So, so helpful. Thanks, man!

I finally found the best tutorial for fractal FM3! Thanks to your kind tutorial!

What is the difference between Mute FX out and Thru options?

Hi Rush, is the Level in the amp block the same as the "Ch Vol" in Helix. I mean, will it affect the FM3 or FM9 preset tone if I change the AMP block's level knob, or is it only for "volume" control?

Hi, is it possible for gapless switching add amps and cabinets in series on the grid and just bypassed them up the scenes I want?

Thank you for sharing.

Rush I really agree with you that you can not guarantee a sold preset tone and that many factors will affect the final tone. However, studying your presets or leaving them as "templates" would be an invaluable help for the fractal community. Trust me on this!

Can I see the "current song name somewhere" in the screen? As far as I noticed, I can see previous and next, but no current...

What are the expression pedals you like to pair with the fractal processors?

Hey Rosh.......curious how you got the BIG FONTS on the FM9 footswitches? I know how to use the ZOOM button to enlarge the main display, but can't figure out the footswitch displays? Please let me know if you can. Thanks much!

Rosh my Gosh, what an awesome patch! It's the Holy Grail of patches!!!! This is the first patch that I've honestly felt like it is gig ready AND the foot controllers are programmed also! You made my New Year! Thanks so much!

Hi, great videos. I sold my Fm9 because I couldn't get to a stomp's parameters quickly without scrolling through menus or pressing a lot of buttons when playing live. If I can figure that out, I will most likely get another one. Can you tell my the quickest way to get to the parameters of a delay pedal or overdrive. Thanks, Frank

Hey Rosh! Your 'Gig Ready' Preset series is such a GREAT idea! I can't thank you enough for putting these together! I have a medium amount of experience with my FM9, but want to use it gigging while I gain more knowledge. This is a great tool for that! I happened to stumble upon this series, but guarantee there's a ton of Fractal users out there that would jump all over your presets for sale once they know about them. Thanks again brother! Much appreciated!

Hey Rosh, great video series. I am working my way through them now with my new FM9. I have an off topic question but it’s about something I noticed on the video. As I was creating the preset and scrolling the amps, I noticed that my unit doesn’t have some of the amps you have on yours. Specifically for this video, the Double Verb. I do have a Deluxe Verb Normal however. Am I missing something or was the Double Verb from a separate upload? My bot is not showing any available updates. Thanks!

Hi Rosh. Thanks for making these vids. Very informative. You said if there's any questions, feel free to ask. I have a few. 🙂 I had a Helix. It fried. Mainly, it was a glorified channel changer for my Engl PB2. Now I have an Axe FX3 MK2 Turbo. I still prefer my amp, but, it's an impressive piece of gear. For around the house, I'm using the Fractal through a QSC K 2 Series Powered Monitor. It's supposed to be FRFR, but all the high gain amps seem glaringly harsh, and have an unnatural low frequency I can't put my finger on. The Helix was the same. I have noticed that when going through a passive monitor, it's a totally different ballgame, and it sounded and felt more like a real amp and cab. Any suggestions would be most welcome. Also, I see most presets have the FX after the cab. What's the advantage of this vs having them after the amp and before the cab? Thanks so much, and Happy Holidays!

Hello. Is there any advantage or disadvantage of using mixer over demultiplexer to do the path selection (A/B function)?

If I go from output 3 to the return of the amplifier, then I cannot increase the volume because it simply does not work through such a connection to the head of the amplifier. My handle for output3 is turned clockwise to the end and the volume on the stage is not enough for me, what should I do in this case?

Hi Rosh, just watched your vid and thanks so much for sharing as it gives me a different perspective of setting up. I'm gonna try your setup for one of my presets. Just to ask from you experience, if you go Amp = Cab = wet effects = Output vs Amp = wet effects = cab = output.... In your opinion would there be a huge tonal difference? I'm gonna try this out when I get the time but thought of getting your opinion on this. Thanks again!

Hey Rosh, really enjoying the series. Thanks for putting this up. I just got the Mark II Turbo and Layout #8 is titled Sets-Songs. Is there still a way to build a new custom layout since there are no empty layouts available? Thanks again.

Very nice, man! Sounding great

Dear Rosh, thanks for the video. But I have a question! If I turn output 3 on to return the guitar amplifier and turn output three to the end clockwise, it happens that the volume from the cabinet is either a lot or not enough, since I am connected to the guitar amp through the return there is no way to turn the volume knob, in this case how to change the volume in both directions louder or quieter leaving the knob Output volume 3 clockwise to the end?

Great content Rosh. Thank you for helping me along my FM9 journey. at 13:05 it does sound like clipping though. Is it just the speakers I am listening on?

Excellent Josh…excellent. Great great info 💯

what would you do if you use IEM ? how will you be routing it? can you go in fm3 to get the iem sound? or you nned it from the FOH ?

Hey Rosh,how are you ? Would you mind helping me out on how to have a Compressor control the Wah high frequency boost on the FM3 please 😢? I'm really struggling to have a nice clean Wah sound for Reggae stuffs 😭

You saved my life. Subscribed!

Stumbled across this as I was using Loopback for other purposes however I'm curious how you monitored the AxeFX? Did you monitor it directly via Apollo's I/O or the AxeFX USB interface via Loopback? Getting the guitar audio into Zoom or Logic would work but monitoring the guitar via the modeller's USB interface in Loopback would add too much latency (well at least does for me with the FM9). How would you recommend setting this up for the Apollo Twin so you can keep stereo from the Fractal while having a mic taking up one of the Twin's Ins? Is that possible or is the only option to run mono in channel two of the Apollo and monitor directly?

NICE!! I have been reading the manual for an hour looking how to do this (upper limit/lower limit preset selection) but I don't think its in there. Greatly appreciated. Great videos by the way.

Scene controllers would also be a way to adjust parameters (Volume, gain, etc) between scenes with much more flexibility and ability to change multiple parameters.

I did excactly all your steps but i have no sound with my own preset .All the factory presets do have sound.

You have a video that goes into the specifics of the tap tempo on the FC-12? I can't get the button on my board to work like you do here. The 'tempo' button on the front of the unit works but something is keeping the one on my board from working properly..

I am just about to place an order for an FM3 Turbo and I am a bit afraid of all the tweaks and settings I will need to make. I have just watched your video and it was very clear and useful. I will definitely go on with them, they will save me a lot of time and frustration. Thank you for creating these tutorials for us for free. In return, you earned my sub.

God save the Rosh! This is what I was looking for. How cool it is when everything is shown live on the stage itself, this was so lacking. Thank you, my friend

Hi Rosh, great clip, great preset, just bought it.. one question: when in the per preset performance pedal layout, with all the pedals displayed, if you click on, say, the overdrive button and want to change the type of overdrive from the one you set for Channel A, to the one in B, C or D, how do you do that on the unit (if you don’t use FM9 Edit during the gig)? Tks again!

You're a gentleman, Rosh. Appreciate all you do for the Fractal community

These videos are just great, its like the real world , i use tube amps with pedal boards in front my entire life , recently switching to the axe fix III world and although hesitated especially for live gigs i get more confidence every time i see these tutorials , thanks for the sharing

I play a Novo Serus J with P90's. What preset do you recommend? Thanks And do they sound good with a Fender FR10?

Hi Rosh, nice job! Could you please share your global settings for Outputs 1, 2, and 3, i.e. +4/-10, copy L->R vs. Sum L->R, etc. Thank you.

Thank you! Much appreciated.

Hi Rash, can you help me to setup with a video my axe fx ii in stereo? I need some guidance with cable and computer interface axe edit.

Nice does it work similar in the AXE FX 2?