CYCLONE SETH invades MOFFAT BEACH
2:05
Пікірлер
@andycumming60
@andycumming60 5 күн бұрын
Great video Dronehack. Visited the wreck by dinghy on high tide, an interesting trip to the past.
@tekpiksapasifika3494
@tekpiksapasifika3494 13 күн бұрын
A friend said the Osmo Actions are reliable...not shutting down mid air
@tekpiksapasifika3494
@tekpiksapasifika3494 13 күн бұрын
Yes_the misis are always problems......hehe....
@dinosabic5383
@dinosabic5383 2 ай бұрын
I'm looking to get myself one of these guys in the next couple weeks. Really appreciate the great close ups and quality footage. It's a beautiful quad!
@biamarkthepwong1486
@biamarkthepwong1486 2 ай бұрын
I accidentally disarms too while trying to find GPS​rescue 😂
@mykee_sd619
@mykee_sd619 3 ай бұрын
I love my Bob57. Mine came with beta flight 4.3 . I’m also flying with the stock tunes that it came out the box. I need to try Ellis van Jason’s tune soon. I heard it’ll totally change the drone. I switched out the stock 6032 with Gemfan 6042. Higher pitch & im flying way faster & it doesn’t seem to take away from my flight time.Cruising between 55-65mph (30 Degree camera tilt).
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 3 ай бұрын
I’ll have to look into that Ellis tune, might give it a shot! Thanks for sharing your experience. 🤠👍🏼 Thanks for your support bro sorry for late reply.
@kushangsolanki999
@kushangsolanki999 3 ай бұрын
Shat betafloght version amd tune are you running ??
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 3 ай бұрын
It is just out of the box and I just bound the Angle mode switch but I didn't see what version. I will check and put it in the next video 🤠👍🏼 thanks for watching sorry for late reply.
@mcmediaandfilm
@mcmediaandfilm 3 ай бұрын
Subbed just ordered the bob57 here I'm uk based weather is changing typical lol ,ordered bnf with commando 8 elrs , I'm using it with goggles 3 have you had any blackouts?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 3 ай бұрын
I have heard about blackouts and whilst I didn't experience any on this maiden flight I was only flying at about 500m range which in Angle mode so I don't feel like I can gauge that yet. I am using Crossfire and it dropped out once when I was behind two walls of trees but I can judge much from that either. I need to do more testing. 🤠👍🏼 thanks for reaching out sorry for the late response.
@connordubois7454
@connordubois7454 3 ай бұрын
can you show link for connecting it to the controller ?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 3 ай бұрын
It will be in my Nazgul video. My bad I didn't put the link in the show notes here it is. kzbin.info/www/bejne/nKvSdXmKd5ytiLM The Nazgul is exactly the same as the BOB57 but just remember I am using Crossfire with Tango 2 Pro so it will detail this procedure. Thanks for the support 🤠👍🏼 sorry for the late response.
@tamafaalii3207
@tamafaalii3207 4 ай бұрын
do you have any clinics in brisbane
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 3 ай бұрын
Yeah for sure we can do a clinic in Brisbane. It would be best to organise this via email. [email protected] But all you will need to do is lock in a time. I am booked out all of November. Still a few spots available in December and early next year is free as a bird. A 2 hour One-on-One lesson will cost $330incGST and you can bring 2 friends if you like. Email me to lock in time and find out more if you are interested. 🤠👍🏼 Thanks for your support and sorry for late reply I am bad this stuff.
@dylananderson1519
@dylananderson1519 4 ай бұрын
Does it come with props
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 3 ай бұрын
Yep for sure! But the stock props can be upgraded according to a comment above. 🤠👍🏼 Thanks for reaching out sorry for late reply.
@Ackdaddy100
@Ackdaddy100 4 ай бұрын
Wonderful place to live ❤
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 3 ай бұрын
It really is! 🤠👍🏼 thanks for the support sorry for late reply.
@craig_Dronepilotsqld
@craig_Dronepilotsqld 5 ай бұрын
Sorry for your loss mate...Nice Shot of that Manta Ray too bud! Interested to see what choice you go with next? I'm just getting used to the Avata 2 I got a few weeks back 🙂. Might catch you up the Sunny Coast sometime!!
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
Yeah the cheeky lil' guy just hanging out there 😂🤣 feel free to hit me up for a fly sometime. Hopefully I will get more of a chance to fly over the next few months. 🤞🏼
@AcruxFPV
@AcruxFPV 5 ай бұрын
Great video mate. The Nazgul Evoque was my first FPV quad and I absolutely loved it. Your first flight went a lot better than mine! 🤣
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
You never know what is going to happen on that first flight 😂🤣 it sounds like you were able to recover and get flying again shortly after... that is the most important thing... keep flying!
@AcruxFPV
@AcruxFPV 5 ай бұрын
Great video mate! I've enjoyed watching your journey with the Nazgul Evoque. You should try the F6 next - you'll love it. I fly over water all the time, pretty soon you won't even worry about it. Keep em coming mate. 💪🤙
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
Will do 🤠👍🏼 I have already got an upgrade 🤗 The next video will explain why 🥹 The video after that one will explain what I chose to go with 😜
@dcpositive
@dcpositive 5 ай бұрын
Well explained and great insight into these amazing captures… so epic! You absolutely nailed it 🙌🏼
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
Cheers Dan! Appreciate the kind words and support. Great to catch up as well! Talk again soon 🤠👍🏼
@mikewow
@mikewow 10 ай бұрын
How much should you tighten your antenna? Mine fell off after landing
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
You should be able to tighten it until it can be tightened any further. Without forcing or stripping the nut end.
@heIIooooooo
@heIIooooooo 11 ай бұрын
big sticky bohjaina
@PedroLopez-pj3gh
@PedroLopez-pj3gh 11 ай бұрын
@Rider.minivolg
@Rider.minivolg Жыл бұрын
Please comment me
@Rider.minivolg
@Rider.minivolg Жыл бұрын
Sir alpha oil natural hai kaya
@ramilamrahov8808
@ramilamrahov8808 Жыл бұрын
no have gps mount?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
Not on this one.
@YTFPV
@YTFPV Жыл бұрын
i got the drone but with the 03 air unit any idea why the dron just lost connection randomly ? Thanks
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
hey mate, sorry for late reply I am pretty slack. There are many variables with that... Was it RX or VTX that disconnected?
@mandrewtrow
@mandrewtrow Жыл бұрын
Nice upgrade
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS Жыл бұрын
Thanks! 🤠👍🏼
@papamike0545
@papamike0545 Жыл бұрын
Baterias 4s ou 6s?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
Pusher25 4S - ProteK35 4S - Nazgul 6S
@franciseugene4895
@franciseugene4895 Жыл бұрын
Got mine just the other day and mostly same configurations as yours. Will have my maiden flight soon!
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 5 ай бұрын
Hope it went well 🙌🏼
@tompeters6109
@tompeters6109 2 жыл бұрын
Hi, nice mount. Is there a file on thingiverse? I have not yet found a DJI Action 2 Mount that fits the standard small gopro mount on the Protek Pusher 25.
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Hey mate! I got the mount from shop.iflight-rc.com. Not sure if they still have it I got it about a year ago. Thanks!
@motaz-baz7095
@motaz-baz7095 2 жыл бұрын
Hey there! It was fun to watch this video I wanna ask about how did you fix the range issue? Can you please explain. I had the same issue with my Dji fpv drone which i already sold it, but just wanna know how did you do that for the next time i buy one. Thank you :)
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Never really had any range issue... I am always trying to find ways to extend my range... I am good with Crossfire and Caddx for about 800m to 1000m with the right L.O.S. 🤠👍🏼
@undahdaskin
@undahdaskin 2 жыл бұрын
Sorry for my ignorance, im only asking this as i want to fly FPV with goggles, is it only yourself that is required to be a member of the MAAA in this situation or do all your spotters also require to be members also? Can my wife act as my spotter?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Hey mate! I rang the secretary of the MAAA about this about 18months ago and he said only the pilot of the FPV drone will need to be a fully paid member of MAAA the spotter does not need to be a member. My wife is my go-to spotter! Cheers 🤠👍🏼
@aleste37
@aleste37 2 жыл бұрын
I just got my R25 even though it's not a pusher, It's etill a sibling to the Protek 25 and would be nice to compare! where abouts do you fly?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
I am on the Sunny Coast of Australia. Email me if you are in this area and we can probably hook something up. 🤠👍🏼
@camcamwatt
@camcamwatt 2 жыл бұрын
Nice info, your lighting (or lack of) makes it hard to stay focused on the video and watch. Try key lighting yourself or illuminating your self with natural light so we can see the front of you ;) - thanks again for the video and I wish you growth and success with your channel :)
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Thanks for watching bro! 😂🤣 Appreciate your honest feedback! 🤠👍🏼
@camcamwatt
@camcamwatt 2 жыл бұрын
@@DRONEHACKPRODUCTIONS anytime :) it’s how we improve right ✌️
@nishaathakkar1372
@nishaathakkar1372 2 жыл бұрын
Prize kitna hai
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Thanks 🙏🏻
@abdealimanager9350
@abdealimanager9350 2 жыл бұрын
Thanks a lot for the video , I had the same issue and since 2 hrs doing debugging thats where i came across this video and thought to give it a try and it worked .Even my usb c extender was damaged .#Thesaviour
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Glad it actually helped! I knew when i was having the issue that other people would be going through the same thing 🤠👍🏼
@sathishsharma1820
@sathishsharma1820 2 жыл бұрын
Not in India. Lol
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Yeah ok 👍🏼
@videowithdamir
@videowithdamir 2 жыл бұрын
nice video! I am flying my protek 35 right now and learning too. I am wondering how do I activate acro mode on my protek 35? I think its on level or horizont level right now as a default
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
You will need to play around with the modes in Betaflight and assign it to a switch for better access. There is a link at the bottom of my video to the video i used to help me 🤠👍🏼 thanks
@nemohhl
@nemohhl 2 жыл бұрын
Hi, Do you need a permit to fly PFV outdoor in Australia ?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Its a long story… i did a whole video on it…!3 videos i think… your question is answered in those 😎👌🏼 thanks
@KyrenShat
@KyrenShat 2 жыл бұрын
lmao im having magpie problems now at the beggining of spring nice to see it in a different light
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
They are beautiful birds just wish they would stay away from my FPVs 🤣😂
@joshuakeeley6263
@joshuakeeley6263 2 жыл бұрын
Hey Dan, I currently live on the Sunshine Coast and just wanted to ask if you need any permits to fly a drone over 500g for commercial use? If so, what would they be? Thanks!
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Hey Josh - if your drone is under 2kg all you need to do is take the quick quiz on CASA website and pay the registration fee (i think it is $40per annum/per drone) and then when you are flying you just need to make sure you stick to the standard operating procedure (SOP). Once you have done all that you are fine to make money from your drone. 🤠👍🏼 thanks for reaching out!
@DannyJamezz
@DannyJamezz 2 жыл бұрын
Can you bind without the button? My button broke
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Pretty sure you need the button working on the Crossfire unit. Otherwise you will need to replace the Crossfire Nano or whatever you are using. Let me know if you need a recommendation for repairs in Australia. 🤠👍🏼 thanks for your support!
@iammondo1870
@iammondo1870 2 жыл бұрын
What video did you use to put the quad into bind mode?
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
First or second video 🤔 kinda think its good watch both 😜🙌🏻
@kineticfx9560
@kineticfx9560 2 жыл бұрын
help me with my protek elrs 25 binding to goggles and commando 8. please please please
@iammondo1870
@iammondo1870 2 жыл бұрын
I'm using the same setup but the 35 instead.
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
I havent had a chance to use those products but when i do i will make a video about it 🤠👍🏼 cheers mate
@outdoorstuff7
@outdoorstuff7 2 жыл бұрын
Great video, that shipwreck drew me into Magnetic Island too. We just spend a week there. You might find our "after trip" video interesting. :-) kzbin.info/www/bejne/jH_UgHqord5ohbs
@brianniebler5440
@brianniebler5440 2 жыл бұрын
Dude you are a lifesaver - what are the chances you put this video out there? I had this same exact problem with hours of frustration until I came across this video. Quickly pulled that piece out and was able to plug into the usb-c easily and update firmware. Thank you!
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
No worries mate 🤠👍🏼 i knew someone else would have the same issue 😉 funny thing i have 3 iFlight cinewhoops and they all had issues the the adapters. Basically making it harder to setup by putting them in there 🤷🏻‍♂️
@theoneandonly5149
@theoneandonly5149 2 жыл бұрын
This is very amazing
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Thanks for watching 🤠👍🏼👍🏼
@deivissergio2378
@deivissergio2378 2 жыл бұрын
Very nice video, with the troubleshooting !!! And I like to see your progress with the FPV (I must admit that now I am encouraged to start too - I just fly normal drones and even DJI FPV in Normal and Sport mode). Just one thing, to change the rotation of the motors, you can use a software called BL_Heli_32, that will record the Firmware on the ESC controller board (but just the software related to the motors controllers). The issue with Motor 4 seems to have something to do with the Motor number 1. The MOS-FET circuits can be damaged due to the previous problem (the Motor 1 drained too much current and in the moment it got damaged, caused an unbalanced power distribution to the board, and probably damaged the MOS-FET from Motor 4). Well, to check that is only possible with good knowledge in electronics. Maybe the quick solution is to replace the ESC board. Good luck and when you get it repaired, please send us an Update 🤗
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Thanks for the heads up! You make a lot of sense and I kind of thought that with such a small AIO board that what you said could be a real issue… 🤠👍🏼 thanks again for the support
@widerlenz2247
@widerlenz2247 2 жыл бұрын
i had a similar problem and turned out to be the wrong firmware I flashed to the wrong FC. so make sure to flash the correct firmware to your target FC ( better download the firmware from the manufacturer's website)
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Yeah I will make sure I dont end up with this problem 😬 its the last thing I need at this point 😂😅 thanks for watching 🤠👍🏼
@kurtzFPV
@kurtzFPV 2 жыл бұрын
Nice job walking calmly through the troubleshooting process. At about 18:02 is when I start cursing uncontrollably scaring everyone and the dog. It doesn't help though. Looks like it's time to order a new board. At least the bad esc didn't seem to destroy the new motor.
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Ahahahaha! It is new ground and I appreciate all the support from the folks on the internet 🤠👍🏼 thanks for watching
@cresk
@cresk 2 жыл бұрын
Dude this was one of the best videos I've seen, trying to get to grips with (digital) fpv this is much appreciated!
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
No worries bro! 🤠👍🏼 thanks for your support!
@AcruxFPV
@AcruxFPV 2 жыл бұрын
Gotta hate that!! Joshua Bardwell to the rescue. Good timing: kzbin.info/www/bejne/p6XZo3pqntGKnc0
@AcruxFPV
@AcruxFPV 2 жыл бұрын
So good to watch your progression, Dan!! Totally loving this content. 👍
@DRONEHACKPRODUCTIONS
@DRONEHACKPRODUCTIONS 2 жыл бұрын
Thanks for the support! 🤠👍🏼