cause he really is not wanting to buy the ipa setup designed for the plane and he says nxt servos r analog um no they digital HV servos plus 30amp 3amp bec sounds like a 5.0 to 6.0v bec probably want fly good
@outshyne6666 жыл бұрын
Ronny gloves are beast
@jamich16 жыл бұрын
I have just made and tested five turn helical antenna. Went 4.5km away with it and still had good picture. Could have go further but did not have enough power to get back. I will make video how I made it. Now need for some fancy 3d printers guys just get the measurements right and thats it. I used copper wire, plastic syringe, one sided pcb, coax wire and rp sma connector. I will try to get the video out soon. Do not spend more then you have to. This antenna cost me maybe 5 dollars but will use the expenditure to make more of these antennas. So this is 5 dollars for more then just one :)
@Zwcky1016 жыл бұрын
jamich1 I can print you one if you want. Pm me.
@jamich16 жыл бұрын
Zwcky101 thank you, no need for that. Plus you would only have expenditure to make it and send it to Slovakia. So how did your antenna perform ?
@jamich16 жыл бұрын
WOULD BE GOOD TO WRITE ABOUT YOUR EXPERIENCE WITH THIS ANTENNA . DID YOU DO LONG RANGE FLIGHT OR JUST CLOSE RANGE ? ID LIKE TO SEE SOME OUTCOME MORE THEN JUST TO SEE HOW ITS DONE.
@haydenc27427 жыл бұрын
www.thingiverse.com/thing:724458
@cJhudanich7 жыл бұрын
did it work well, and did u say circular wireless? just wondering if u blueprinted and got the spwcs doing it yourself.
@CORZER08 жыл бұрын
Helical, not helicoil, bud. Look up helicoil.
@kenx539 жыл бұрын
They no longer come .pre hindged
@GenrlSt9 жыл бұрын
Are you selling these?
@My.Sm.family9 жыл бұрын
Whats the software u use to creat 3d images
@Zwcky1019 жыл бұрын
I currently use Autodesk Inventor 2016, but at that time I was using AutoCAD.
@FreiNrg9 жыл бұрын
In many other coanda flight models here on YT, I have noticed the modeler uses a propeller to move the air. Is it you opinion that the majority of the propulsive effect is caused by the coanda "airfoil" design or by the nature of the propeller in pulling itself into the air just as a helicopter, insomuch as the helicopter design does not "warp" the airflow down along the sides to provide lift, but the lifting effect of the blades?
@nagymateg9 жыл бұрын
Hi! Did you manage to upgrade your model with the counter rotating motors? If yes, I am very interested in the results.
@DaRoach58829 жыл бұрын
Hey I just came across your video and thought I would share the one that I built a little while ago. Great work! www.thingiverse.com/thing:724458
@Zwcky1019 жыл бұрын
Cool looks some what like mine. Are the holes on the shape holding pieces in a helical cut or just straight?
@DaRoach58829 жыл бұрын
They are cut at the helical angle to help keep the form. Well at least the printed version. I have made one of the frames out of FG and only drilled them out.
@sonnyphan759 жыл бұрын
solid construction.. nice work
@sonnyphan759 жыл бұрын
@ 2:36 looked like your thumb ring was actually moving
@Zwcky1019 жыл бұрын
It's is, it is a gear ring and the gears move.
@CjFroom9 жыл бұрын
Are you still sharing your design on Thingiverse or privately? I have been all over RCGroups, thingiverse and web hoping your shared it already I remember it from Dennis Baldwin's videos that you said you will share it. Pretty Please :)
@kf52t9 жыл бұрын
The template is a very cool idea, can you share your STL files for personal use?
@altonnewton89009 жыл бұрын
I watched a video on Dennis Baldwin's channel about one of your quadcopter designs. Your design is really amazing. I'm trying to design a gopro gimbal of my own. Could you list the components you used to build yours?
@josezambrano35769 жыл бұрын
You live in a very peaceful neighborhood. Nice build btw.
@izzzzzz610 жыл бұрын
Hi Zwcky, is there any reason you wouldn't consider a MINI MWC Flight Control Board and DSM2 Compatible Receiver ACC/GYRO/BARO/MAG? I have bought one and have the orange dsm2 tx module. Would the MINI MWC setup the same as the nano wii? Hope to finish my quad soon. Thanks. James
@rushmore130510 жыл бұрын
what are you filming with
@correia7076 жыл бұрын
Gopro probably
@rushmore130510 жыл бұрын
is there any way you would be able to share the stl for the frame? also what gauge wire are you using, im using 10 and man is it hard to bend
@rushmore130510 жыл бұрын
What gauge wire do you use?
@Zwcky1019 жыл бұрын
Anatoliy Pishenin in using 12awg on mine and it works great.
@j3fron10 жыл бұрын
i keep wondering what the cause of the shake that i saw in your video? mine like that too when using naza fc and cheap goodluckbuy gimbal but not too shaky as you have. but i suspect the naza fc
@Zwcky10110 жыл бұрын
Mine did it because of the fact that i am using very soft vibration dampeners and i need to tweak the PID settings more. I have bought stiffer dampeners which has helped. Next I'm going to spend some time fine tuning the PID settings.
@davedeja10 жыл бұрын
That was pretty exciting. Especially at the 1:10 mark. The quad seems to fly well, how did it handle?
@Zwcky10110 жыл бұрын
I'm still getting use to the throttle being so touchy. With it having 3.4 to one thrust ti weight ratio it's a little harder to judge how much to correct the altitude. Other than that it flies wonderfully.
@ricardopena380510 жыл бұрын
*very neat
@ricardopena380510 жыл бұрын
Very best, did I only use 2 servos??
@tolgahannsusur253410 жыл бұрын
well done !
@marianohernandez19810 жыл бұрын
Did u have to put a wade trap
@marianohernandez19810 жыл бұрын
Did u have to put a wade trap
@Soldier53flyer10 жыл бұрын
Looks great!
@SMTXMagazine10 жыл бұрын
I got a bit dizzy at first while watching this. It felt like I was the one flying. This was fun too watch and I enjoyed that flight over Texas State University.
@zimmy195810 жыл бұрын
nice job
@icybird756511 жыл бұрын
Sweet! I'm goin up there in a couple of days or something to go do the same.
@llvs558011 жыл бұрын
Any chance of this project going on something like IndieGoGo or Kickstarter? I'd be the first to buy it at an Early Bird Special!
@YuriTereshyn11 жыл бұрын
Yo throw the darkest nd filter you can and let me know if that gets rid of the jello
@JaysonHanes11 жыл бұрын
that is working very well, congrats! And thanks for keeping this original posted -- I cannot stand that stabilized bs.. almost makes me feel ill watching videos that use it! lol
@Zwcky10111 жыл бұрын
You can see the unprocessed one on my channel as well.
@Zwcky10111 жыл бұрын
So yes this video is stableized using the KZbin stabilize function. The other on is raw. I would say everything about your setup is important. Make sure you props are well balanced motor bearings are good have viberation stableizers to mount your camera and make sure the gains on your quad aren't set too high.
@Zwyser11 жыл бұрын
well, did not see that it mentions it in the title. ps sorry for spelling your name wrong...
@Zwyser11 жыл бұрын
Great footage Zwicky. looks very stable and smooth. but it looks like you are also using software stabilisation right? what do you think are the most important points for smooth and yello free footage? motors and props?
@horsship11 жыл бұрын
That was a nice flight. Looks very stable and a long flight time. Great job.
@johnnybio111 жыл бұрын
Totally almost got attacked by that bird at 130ish
@johnbuday725111 жыл бұрын
Higher Kv isn't always your friend when flying 3d. The reason for that is higher head speed with less torque, less torque means smaller prop size. When flying 3d, you go from airspeed being what your hinge surfaces work off of, to using prop wash instead to control the plane, which lower Kv works best, allowing you to run a larger prop and less head speed to allow for more control during slower flight which is essential for hardcore 3d flight!
@papo211011 жыл бұрын
Need help dX8 satelite Chanel's are all over the place
@TigersToys11 жыл бұрын
Wow! What a great tutorial. Thanks so much!
@flyincrazzy11 жыл бұрын
me?
@Zwcky10111 жыл бұрын
Message me your number and I'll call you.
@flyincrazzy11 жыл бұрын
i have 2.43v coming out of ground and signal, nothing out of power