The smok nord 4 has this problem to, after 2 months

this design is awful, most pods have this same issue with spring failure, I had it with geekvape and also voopoo and the damn macbook charger too you can fix it by removing the pin using a nail clipper (if you managed to get to it), insert small piece of foil aluminum inside then flip the pin and put it back, this will keep it always raised, you have to press hard on the pod to compress the foil and make it work, otherwise just switch to rebuildable systems like rta/rda

I just bought a new one. Life is too short to play this game.

So I fully just blew up a vape😅

I almost lost my mind as you explained "so, well this is completely knackered" 😂❤ absolutely love it!

I've tried different way. Just soldering on tip of that stuck pin about 1mm and it works like a charm 👍🏻.

You the man! A work around and it works like a charm!

Yeah buddy i have 3 novo smoks with pin stuck in down position

Mine won't fire up. Any ideas. I been having to press hard as hell for a week and now it's just not firing up for me at all. Please help my man.. 🥺🙏 I know it's almost 12:3o a.m there but please help

my charging port is too pushed in how should i make it more to the outside

Mine had a pin get stuck littlerly day one no leak nothing and the place that sold it to me said contact the warranty department there is nothing we can do so here I am after buying a voopoo and a valyrtan3

bro its magic i just fixed mine when i watch your vid i just did what you did and it work thanks alot bro

Please note / warn that this was fail. “ something not to do ! For simple people like me . Who failed with you 😂😢

Mine only has 2 pins ???

thanks bro :) ım from Turkiye

I was not able to use mine for months and left it with juice. The juice leaked and the top part where the gold/bronze pin were wet for a long time. Will the juice go inside? Will it damage the system or explode? Its still working but I'm worried that it will explode. Is the top layer of those pin water/juice proof?

What do they sell replacement parts

Thank's, buddy. Not only was your video captavating and suspenceful, but by the end my unrelated problem was magically solved. You're a hero, saving my ass from across the pond.

kzbin.info/www/bejne/nKG8qX2Ibr10eKs smok pin repair and rpm rba cleaning.

great video had the exact same problem but i fixed with you!

Crap

¡¡Para que poneis los titulares en español si el video esta en ingles!!...¡estáis engañando! Why put the headlines in Spanish if the video is in English!!...you're cheating!

Stfu no one wants to hear a commentator

Well I guess I won’t blow myself up to bad right? lol I don’t have screwdriver 🪛 and center pin is up but both sides are gone… I sorta feel one but nada thing on the other… ok I’m gone to find tin foil and make a connection one way or another. I have taken a jolt from a electrical cattle fence that was hooked up wrong to a metal gate……so I should be fine…. right? Have reg cigarettes but smoked them for years and don’t want to go back…. Will I be fine? I’m way older than most everyone’s phone and the craving well…🙏?…???

Well I guess I won’t blow myself up to bad? lol I don’t have screwdriver 🪛 and center pin is up but both sides are gone… I sorta feel one but nada thing on the other… ok I’m tempted to find tin foil and make a connection one way or another. I have taken a jolt from a electrical cattle fence that was hooked up wrong to a metal gate once……so I should be fine…. right? Have reg cigarettes but smoked them for years and don’t want to go back…. Will I be fine? Right!? Seriously asking ANYONE!

Thank you very much Tom! You probably saved me from starting to smoke cigarettes again.

They all seem to have this problem even with the nord 2, haven't had any others though. What I've been doing is putting a tiny bit of solder on top of the pin so it makes a connection. I've had to do this multiple times but I've had mine for probably 18 months now. I also discovered that sometimes the pins can get stuck from getting gunked up. On the nord 2 you can actually pull the pin and spring out (carefully) and clean them. I was able to stretch the springs out to give them life once again, sadly this doesn't work on the original nord.

I had to remove the rubber piece in mine also so I can pull the pin out when needed

What is the size of the clock button?

👏👏👏👏 congrats! Unbelievable patience!! I need to get me a screwdriver kit like yours tomorrow!! 😉😂

i always sandwich a piece of metal(small bits of cutter blade) between the middle pin and the middle section of the coil. and it's making contact. been doing in for like 6 months now. Smok Nord is a tank

Dude! I Thank You soo Much! - I Watched this video maybe about a Year ago... And Never thought I would have to One Day TODAY come running back to it!!! Thanks for the Video! Gave me A HECK of a hard time, but, You Saved my NORD! Thanks!

Dude. Holy shit! You saved me from having withdrawal symptoms! Thank you so much!!!

Just solder a small spring from a bic lighter on the pin and it will work as good as new

Thanks from Russia

PLEASE HELP ME! at the subsystem "SMOK nord 2" the screen was flooded, the pixels were completely darkened, I accidentally dropped it in a puddle. tell me what to do? how to disassemble it?! respond

Simply pulling the pin up doesn't fix the issue. The center pin will push pack down again, and you are back where you started.. Has to be a way to get in behind the center pin and wedge something behind it possibly.

for me it was my side pins that became stuck i took them apart following this video but the springs would not pop back up even with alcohol so i pulled one of the pins out and i found no springs? just a little ball, weird maybe its some kinda air spring or something? ether way i read in the comments about soldering the pins so i ended up putting a little ball of solder on the tips, it took a few tries to get it even but works like a charm!

I've had some luck pushing the central contact of the coil out just a little bit with a toothpick.

I have a nord 2 with this issue and it just keeps getting worse, but this vid did help make it last a bit longer :) I would really like to see a nord 2 teardown though

13:00 I am surprised you didnt see the two black screws but nice video

Wystarczy plaski srubokret i penseta pozdro

Mine just got a slight rust around the middle button after leaving it months without using. Kinda my problem when i was too lazy to drain off the juice from the pod. I was wondering how to dissemble after removing the top 4 screw and got to this video feeds. Just a protip, when trying to take out the back cover there's two hinges on each side if you carefully use a blade knife and hook it out, it would hardly damage the cover nor the body paint works. I decided to fix it after buying smok 80rpm pro. Anyway thanks for the video once again for helping out.

Thank you this helped me so much

Can someone plzzzz tell me what size screw bit to use!?!?, I’ve looked everywhere online and I can’t find the size. I don’t want to buy a whole set of torx bits.

MURDER AVERTED LOL. GOOD JOB BRUH.

honestly the vape itself is such a good device one of my favourite hitting devices I owned 2 Nord 1s and A Nord 2, but the flaws in the design eg( the pins staying down, the pod leaking 24-7,etc) make me not wanna buy smok because if u look online I’d say 80% of users have the same problems so it’s inconsistency in theyre products it’s not just like 1 in 1000 of them do it

Thanks thanks, gracias gracias

кайф,для тех кто не понял нужно плоскогубцами сплющить пин что бы он не уходил ниже и всё заработает. спасибо автору за помощь!!!

Stuck in the middle inside how to get it out and the device can not charge what to solve