bruce willis???

Actually your tip about lowering the volume to save battery life was the best part of this vid👌

Does it have play and pause on the earbuds? Do you think you could wear sunglasses while you have these on?

This is great for rog phones with the side usb c charging port to balance the weight of the powerbank

Can I charge this with usb c and lightning both the same time ?

Can you compare this to the 20w Anker the one that doesn't fold

The 10000mah seems like it charges my phones much faster.

I have been pronouncing it "in-you-eye" and "in-ooh-ē" interchangeably. Would love to know the correct pronunciation though.

How much softener can you put in to fill it up, or do you put 1 cup of softener as you wash a load

This is still a problem. But this fix still works in 2024. Thanks!

You can find the Acer laptop on Amazon with our affiliate link here: amzn.to/4gNcOFr

I have LG tv, PS5, Switch, Wii and Sonos soundbar ARC and Sub. Howdo i hook sound up? Thanks!

does it make a noise when charging for 65w devices?

How do you adjust the volume?

Thank you for the video

You can find the AMEGAT charger on Amazon with our affiliate link here: amzn.to/4dp50aa

Thanks for the review

Why you gotta bring family into it

good for use on tuning cars / Sims 4 games / circuit use?

Ion plant generators electromagnetics

Bigger states 5 main plants static collector's sequestration

As much as I don't want to like Walmart and don't want to support things being made in China and stuff like that, I can't help it. I love that place. They have everything and the quality is just as good or better than the more expensive name brand stuff. I swear to God. The produce is so much better and the clothes are so cheap and soft and well made. I mean you can't really compete with that, which is a big problem. But it's also an easy decision for me since I don't have money to burn and I'm getting better stuff there than anywhere else

Ive always pillowed tips buds either wired tws but im interested in retrying semi in ear for two reasons. My fully in ear buds acumulate too much wax and im scared to ruin them because of it. 2 when i excercise one side it says perfect but the other side kind of slips. It doesnt fall completley because the wings do help but kind of slides out so here watching videos to check if i should try semi in ear. My last semi in ear were my wired airpods which came my ipod mini 😂😂😂 After that i really soon changes to fully in ear buds.

Comes with a lightning too for us 14 users with 85% bat health…

Why do they include the stickers? The explanation didn’t make sense

Sadly there isn’t a display port

Man I wish I had it in Australia

Well, so not much of a real review, it does all the typical thermo things but the things that I wanted to find out to see if they match what our old Nest did like recirculation options (what kind of schedule can be set?) or schedule detail (beyond 4 fixed times, can it be individual days can there be more time) is simply glossed over, sigh

What’s the model number on the washer & dryer?

Thank you! This was the best tip I have seen ALL YEAR! Thank you so much, your video helped me get my issue resolved after an hour of trying on my own and calling the number I found on Google!

Do they work with iPhone well?

This is perfect for a parent doing GameChanger at baseball games!

does anything happen when I charge a phone with on the laptop port?

Would it be useful for the 12 day Mongolia camping trip I’m going to. How long does it take to charge. Does it last a couple days?

What the heck are those pallets - I don’t think that’s code as such and won’t be good for your tub to be sitting like that. Should be flat and even I believe. You have to remember the little thin layer of fiberglass is all that’s between you and that bottom piece. And if someone jumps around and stomps ie kids, or very heavy individuals your bottom ie of the hot tub could get distorted. I would make sure it’s level, where it’s sitting is even and flat. It tells you that in installation. You should be able to keep one for 20 years so I would get that hole filled in with leveled concrete up to where it needs to sit. Not busted up pallets that don’t even cover the entire hole. Serious… Didn’t the dealer install it. Sounds like they are bad! Didn’t take care of wiring or telling you that, and the surface putting it on. Gosh! It’s worth the extra $750-1,000 for them to install because then it’s not your fault if there is an issue. I wouldn’t touch it ie use it for even a few minutes until a qualified, license electrician had done their part and the dealer that sells it has their people or who they recommend install it, fills it, makes sure the water starts out right. And that they give you a written statement that’s of such and such date it’s okay to use it. Then it’s the buyer’s duty is to drain it every couple of months, and that you use the chemicals Bullfrog recommends, and their maintenance schedule carefully including winterizing. And the daily chemical tests. If you can afford it and if you are buying a premium hot tub like this and spending $15-18,000, you should be able to have the dealer have their people take care of major maintenance and there are a number of steps but also have a reputable pool company come out each week and after some big party where too many get in. That’s on you and folks can’t blame the hot tub if they don’t follow directions. Then you have done everything proper and used reputable people to handle the big things and a good pool cleaning company to do weekly cleaning getting all the debris out, chemical checks, etc each week along with the daily checks you will do and keep a log book on those. When drained don’t forget cleaning water lines, ie where the water sits and waxing as recommended to prevent the acrylic being ruined etc. don’t forget the head rest to and use what ever they recommend. Improper chemicals and pH will ruin the head rests and entire acrylic shell. If you don’t want to do as much to the shell make sure you buy a fiberglass pool or hot tub. Fiberglass can be ground down to make repairs, acrylic can not and unfortunately most tubs if not almost all including bullfrog don’t use fiberglass on the top portion of the tub just underneath on the skin. There is a how do we build our hot tub you can find to watch. You will see how thin it is that goes on that skin. I haven’t seen it in a while but it’s vacuumed down to a mold and afterwards a thin layer of fiberglass is sprayed on it, then make the holes for jets. They have much less holes, ie less chance for leaks but anything that goes wrong that isn’t easily gotten to, the insulations gets ripped out and rarely gets replaced. Make sure who you use, they replace insulation with exact kind used by bullfrog and fully replace. I have seen too many where they don’t. Those jet packs are for more than just being able to move them around, they help keep the lines underwater to stay warm and cut electricity costs running the tub and so they don’t have hundreds of lines running around in the tub and all potential leaks and all those extra holes cut in,the tub. Ames a big difference. All that said, I sure hope that quality control isn’t being lost at Bullfrog. Didn’t you get a qualified electrician to do the wiring?

Listen I asked you for Amazon's telephone number I am really pissed right now and I don't want to say something bad out of my mouth to you I asked you for the telephone number

Brown Sandra Clark Margaret Gonzalez Ruth

how is the magnetic strength of it?

637 Hickle Wells

Thank you very well presented.

Hi. I have had my charger plugged in for a couple hours, but it won't light up the paw. I have changed plugs and even the plug in. I charged it once and it lit up the paw. How do I know if it is defective?

So what I am looking to do(please tell me if this device will work for this.) PC 1 - connected to the internet, connected to my external HDD, I put music/videos etc on it. PC 2 - is not online, but is connected to my HDTV. I want to play the media from that same external HDD. So can I, PC 1 download and put media on the HDD, hit this hubs switch, then drag the media from the external HDD onto PC 2(or maybe just play the media outright from it)? Are there any limitations to doing this? I have read about some of these hubs randomly disconnecting etc etc.

What is the lowest current that can be set for the port? What is the adjustment step? For example: 100\80\80\65\45\45\30\20 watts.

My ear buds (apple) are not charging 😢

You can find this LISEN charger on Amazon with our affiliate link here: amzn.to/4ewysfn

I am glad Bruce Willis is making good use of his time❤❤❤

can it control humidity level?

Does it sound better than AirPods ?

You can find the Anker MagGo Power Bank on Amazon with our affilaite link here: amzn.to/3ZA3PBj