This was awesome! How long have you been racing? Plan on starting next year myself.
@andongf43383 ай бұрын
@@pmoto Thanks! I’ve been racing for 3 years. If you plan on racing I’d contact WMRRA. wmrra.com/ They’ll give you all the information you need to get started.
@Mistery5103 ай бұрын
It's been three years. Still using this?
@andongf43383 ай бұрын
@@Mistery510 last time I used it was June of this year. Still holding up well.
@1GiPhoner4 ай бұрын
Nice build, what's the longest stretch you've taken it on?
@andongf43384 ай бұрын
@@1GiPhoner 146 miles one way. I’ve done that at least 4 times with no issues. Averaging 60 mph.
@1GiPhoner4 ай бұрын
that was a smooth mounting!
@paul99124 ай бұрын
Those loose straps were scaring me
@andongf43384 ай бұрын
@@paul9912 lol thankfully I haven’t lost the bike yet. I use close end straps so it helps from it falling off.
@David-bf6pl5 ай бұрын
How did you get started in racing? Who would I talk to? What is amateur racing? Thanks.
@andongf43385 ай бұрын
@@David-bf6pl It started with track days. A friend of mine was already racing, so I went and jumped in and started racing myself. I’m guessing you are from Washington or Oregon? Here’s a link. Oregon: www.omrra.com/ Washington: wmrra.com/ Just shoot them an email. Or look at the race schedule and go watch some of the races. A lot of the guys there are friendly and can answer questions. Hope that helps.
@rumblemoto4205 ай бұрын
why cant anyone leave links to the products they review... and why cant i find this trailer on HF website?
@robertatkinson28105 ай бұрын
Harbor freight trailers are rated for a maximum of 45 mph per the website I bought this same trailer to build a med size bbq trailer but worried about the 45 Max
@andongf43385 ай бұрын
@@robertatkinson2810 I’ve put more than 1200 miles on the trailer already averaging 60+ mph. I’ve had no issues. Just make sure you repack the bearings. Don’t use the one that they repacked it with. I didn’t show it on the video but I removed the grease that came with it and repacked it with grease I purchased at a local auto parts store.
@jeremyluarca77146 ай бұрын
What lake?
@andongf43386 ай бұрын
@@jeremyluarca7714 By Timothy
@DangerZonePNW6 ай бұрын
I was the guy who flubbed the start royally on your left. #965. See you at the next round!
@andongf43386 ай бұрын
@@DangerZonePNW I wish I would have kept up lol! Hopefully I’ll make it next round 🤙🏼
@dg80626 ай бұрын
Great vid! Why do they always run the chicane at the ridge? Do they think it's a little too fast and dangerous going in to that fast 1st turn left hander?
@andongf43386 ай бұрын
From what I heard when racing, yes they run the chicane because of the first turn when racing because of it being too dangerous. On track days sometimes they don’t run it.
@JNOSNOW5 ай бұрын
The chicane is super fun. Its wayyy better with the chicane than without, who doesnt love more turns?
@732duc36 ай бұрын
Nice ride man you look good out there!
@andongf43386 ай бұрын
Thank you! Definitely had a great time being out there.
@autostationfanatic6 ай бұрын
Like a pro bro
@phineas77856 ай бұрын
Any of the badgers go up... ? Right on dude...... ❤
@andongf43386 ай бұрын
None of them wanted to show up so it was just me 💪🏼. Thanks!
@phineas77856 ай бұрын
@@andongf4338 fun ti watch. Thinking of doing a T day up there poss aug.. Taking the rc51. Cheers
@andongf43386 ай бұрын
@@phineas7785 yea I love The Ridge! I’m glad I got to finally race on it. Track days are always fun.
@samdoe50877 ай бұрын
It would be a lot easier to load if you flipped the axle. Put the axle on top of the leaf springs. If it seems like it is riding too rough you can shorten the smaller leaf springs or even remove one or more of them.
@marekpelikan98737 ай бұрын
Does anybody know, what is the limit for this intercooler?
@nickchilds31047 ай бұрын
I have the exact same setup, including the rail. Did you ever notice the rail digging into the tire? My front has turned every time I've trailered it to the track, and it always puts a massive gouge in my tire. It started happening on the rear as well.
@andongf43387 ай бұрын
Nice! I’ve never had the issue you are having though. How wide is your rail? I think mine is about 8” or 10” wide which clears the edges of the rail so no gouge.
@LittleMissIssues7 ай бұрын
Gorgeous and so peaceful!! 😊
@LittleMissIssues7 ай бұрын
Oh yeah also DJI osmo action is a great camera!!!
@LittleMissIssues7 ай бұрын
Wow man!!! That is wild!!! Great 360 views!! Nice to meet you!!
@andongf43387 ай бұрын
Thank you! It was nice to meet you as well!
@Matt-ji2sy7 ай бұрын
Do you have any video or dyno plots with the boost at stock levels, before raising it?
@andongf43387 ай бұрын
I don’t have any videos of it sorry.
@Matt-ji2sy7 ай бұрын
Ok. No worries. 👍
@Cjay22907 ай бұрын
On that that lil pipe u was putting ur finger on in the last few sec of the clip that had vaccum, what did you end up doing with it, im doing the same thing as you but im clueless as to what im suppose to do with that pipe since the hose dont connect to the intercooler pipping
@andongf43387 ай бұрын
I installed a really small air intake filter. I believe I purchased it at Autozone.
@Cjay22907 ай бұрын
@@andongf4338 thank you so much for replying i looked all over and couldn’t find a answer. Now my next hunt is to find how to install the HKS SLD to remove the dam speed limit japan has on the 3rd gen 3sgte lol
@andongf43387 ай бұрын
@@Cjay2290 yep no problem. With the HKS lsd, can’t help you out with that one. My 3rd gen doesn’t have it.
@jeremyluarca77147 ай бұрын
This is dope bro!
@andongf43387 ай бұрын
Mural is by the work place bro.
@cognac82978 ай бұрын
Thats nice car trailer I like it
@andongf43388 ай бұрын
It’s been a great trailer.
@jeffreytoevs69828 ай бұрын
My stupid wheelie at the launch 😂
@andongf43388 ай бұрын
Lol! Well you still placed 4th so it’s better outcome than me.
@phineas77859 ай бұрын
Cool...... Wish I was running.
@andongf43389 ай бұрын
Maybe next round?
@nov67809 ай бұрын
hell yea 🔥
@autostationfanatic10 ай бұрын
Wow
@nov678010 ай бұрын
Content I want to see 🤙🏼
@andongf433810 ай бұрын
Thanks! There will be more if it
@LL-cz5ql10 ай бұрын
very cool! thanks for sharing
@andongf433810 ай бұрын
It’s a new Hobby, I’d say it’s a lot cheaper than racing lol!
@jeremyluarca771410 ай бұрын
This is dope.
@andongf433810 ай бұрын
Yea bro it’s super fun! I thought I was fit but I was really sore the next day lol!
@bsgyoungblood11 ай бұрын
Looks good man.
@andongf433811 ай бұрын
Thank you! See you at the track soon.
@phineas778511 ай бұрын
Well done, Did you twist Kriss arm to paint it. 😊
@andongf433811 ай бұрын
Thanks, haha we will say just a little bit.
@jeremyluarca771411 ай бұрын
Nice brotha!! Almost race season again.
@andongf433811 ай бұрын
Yep can’t wait for riding/race season.
@mrpanda847211 ай бұрын
What is the metal thing the bike is on with the bend at the end
@andongf433811 ай бұрын
Motorcycle rail. I googled it and directed me to eBay where I purchased it. Unfortunately they don’t sell them anymore last time I checked.
@jeremyluarca7714 Жыл бұрын
How many time did you fall ? Lol
@andongf4338 Жыл бұрын
😂 surprisingly none on this ride lol!
@HrDKnockLife Жыл бұрын
Where did you get the ramp/groove the motorcycle sits in on the trailer? Great job
@andongf4338 Жыл бұрын
I googled motorcycle rail and sent me to eBay where I purchased it. Unfortunately it seems like they are sold out/don’t make them anymore.
@HrDKnockLife Жыл бұрын
@@andongf4338 Ah gotcha. Thanks for the reply and the video.
@whatwoulddarrendo1325 Жыл бұрын
What's the brand and size of those wheels please? They look great
@andongf4338 Жыл бұрын
They are 17x8 fronts, 17x9 rears and I believe both are +25. Works vs-xx wheels
@@theunluckycharm9637 I believe they don’t. But it wouldn’t matter on my end anyways since I just have liability on the bike.
@phineas7785 Жыл бұрын
I used scuba dive for crab, fast little critters. What fun night crabbing.
@andongf4338 Жыл бұрын
That’s one thing I want to learn is scuba diving. Just haven’t had the time to catch up on it.
@tpp4007 Жыл бұрын
Nice, where I live, that crab is about $25-$35
@andongf4338 Жыл бұрын
I believe it’s $10.99 a lb here in Oregon and limit is 12 per person. It was definitely worth the trip.
@portlandguy6999 Жыл бұрын
"Kinda sketchy with a kayak"...Toby should do it. 😂
@andongf4338 Жыл бұрын
😂 haha I did a couple pulls. But yes he did the majority of it.
@autostationfanatic Жыл бұрын
😊
@nov6780 Жыл бұрын
🔥🔥
@HondaGoldwingGL1800 Жыл бұрын
I am building my own trailer that has the same dimensions as yours has. Would you measure the distance from the coupler to the first cross over for me please? I think it is around 42 inches, but I cant find that dimension anywhere. Thank you...Paul
@andongf4338 Жыл бұрын
The trailer is parked at my buddy’s house. I might head over there next weekend and can give you the measurements.
@HondaGoldwingGL1800 Жыл бұрын
@@andongf4338 That will be great...thank you.
@tedantares2751 Жыл бұрын
Where did you get the rail? Did you bend it yourself? How much was it? Narration would be more useful that the annoying background music. Did you ever think that if people need to listen to music while watching a video that does not have narration they will just play whatever they like?